Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Highly Sensitive DC SQUID Arrays for the Readout of Optical TES at mK Temperatures

Matthias Schmelz, Shvab Vitaliy, Katja Peiselt, Jürgen Kunert, V. Zakosarenko, Th. Stöhlker, G. Oelsner, Ronny Stolz

Published Feb 20, 2025• 3 citations
Publisher

Abstract

In this article, we present advancements of our submicrometer cross-type$\text{Nb}/ \text{AlO}_{x}/ \text{Nb}$Josephson junction technology by implementing an additional highly conductive resistive layer, e.g., for thermalization structures. This allows for shifting the typically observed thermal decoupling of shunt resistors of highly sensitive dc superconducting quantum interference devices (SQUIDs) and SQUID arrays down to temperatures in the millikelvin range. We show results on the technological integration, device design of series SQUID arrays, and their characterization at 4.2 K down to 65 mK. Measurements were performed in an adiabatic demagnetization refrigerator. As an application scenario, we have successfully implemented them as readout circuitry for optical transition edge sensors operated at 150 mK requiring both low-noise and large bandwidth of the readout implemented in a flux-locked loop configuration.

DOI
10.1109/tasc.2025.3543941

Related papers

Development of second-order gradient DC SQUIDs for the readout of superconducting TES detectors

Z. F. Feng, Xuefeng Zhou, Q. X. Ma +12 more

Superconducting transition-edge sensors (TESs) are highly sensitive detectors, can detect electromagnetic wave radiations from millimeter/submillimeter, optical to x/γ rays, suitable for astrophysics, quantum information, and biosensing. Direct current superconducting quantum interference devices (DC SQUIDs) are the detector of choice for TES readout, thanks to their low noise, low impedance, and low power dissipation. In this work, we designed the DC SQUID with a second-order gradient structure, which can effectively mitigate the effect of external magnetic flux. We optimized the fabrication process and successfully fabricated the high-performance DC SQUID with Nb/Al-AlOx/Nb Josephson junctions (critical current density: JC~1μA/μm2). The properties of the fabricated DC SQUID were in good agreement with the simulation results. Meanwhile, the measured flux noise was 6 μΦ0/√Hz, corresponding to a current noise of 100 pA/√Hz. Furthermore, we demonstrated the capability of the DC SQUID to read out the TES detector, including I-V curves, photon pulse response, and noise performance.

Infrared, Millimeter-Wave, and Terahertz Technologies•Nov 19, 2025•1 citation

Development of low-noise two-stage dc-SQUID for TES detector readout

Nan Li, Mengjie Song, Sixiao Hu +9 more

Abstract Direct-current superconducting quantum interference devices (dc-SQUIDs) are one of the most sensitive magnetic detectors. These sensors are extensively used in the readout of superconducting transition edge sensors (TESs), which are used for the detection of weak signals. A cosmic microwave background (CMB) polarization telescope operating in 22–48 GHz is currently under developing. The TESs calorimeter of the telescope will be readout by a time-division multiplexer SQUID readout system. We develop a two-stage dc-SQUID amplifier circuit, comprising an input-stage SQUID with 4 SQUID cells and a series SQUID array with 100 SQUID cells. This configuration has been shown to achieve extremely high signal gain while effectively controlling system noise. We assess the system noise at 300 mK in an adiabatic demagnetization refrigerator. The measured magnetic flux noise of the two-stage SQUID circuit system is approximately 0.3 μ Φ 0 / Hz at 10 kHz. The current noise equivalent to the input coil of input SQUID is about 2.4 pA / Hz . This result meets the low-noise readout requirements of the CMB TES and other applications with TES detectors.

arXiv:2601.19565•Superconductor Science and Technology•Apr 1, 2026•0 citations

Low-noise ultra-high-speed dc SQUID readout electronics

D. Drung, Colmar Hinnrichs, H.-J. Barthelmess

User-friendly ultra-high-speed readout electronics for dc superconducting quantum interference devices (SQUIDs) are presented. To maximize the system bandwidth, the SQUID is directly read out without flux modulation. A composite preamplifier is used consisting of a slow dc amplifier in parallel with a fast ac amplifier. In this way, excellent dc precision and a high amplifier bandwidth of 50 MHz are achieved, simultaneously. A virtual 50 Ω amplifier input resistance with negligible excess noise is realized by active shunting, i.e., by applying feedback from preamplifier output to input via a high resistance. The white voltage and current noise levels are 0.33 nV Hz −1 and 2.6 pA Hz −1/2 , respectively. The electronics is fully computer controlled via a microcontroller integrated into the flux-locked loop (FLL) board. Easy-to-use software makes the various electronic settings accessible. A wide bias voltage range of 1.3 mV enables the readout of series SQUID arrays. Furthermore, additional current sources allow the operation of two-stage SQUIDs or transition edge sensors. The electronics was tested using various SQUIDs with input inductances between 30 nH and 1.5 µH. Typically, the maximum FLL bandwidth was 20 MHz, which is close to the theoretical limit given by transmission line delay within the FLL. Slew rates of up to 4.6 Φ 0 µs −1 were achieved with series SQUID arrays. Current noise levels as low as 0.47 pA Hz −1/2 and coupled energy sensitivities between 90 h and 500 h were measured at 4.2 K, where h is the Planck constant. The noise did not degrade when the system bandwidth was increased to the maximum value of about 20 MHz. With a two-stage set-up, intrinsic white energy sensitivities of 30 h and 2.3 h were measured at 4.2 and 0.3 K, respectively.

Superconductor Science and Technology•Feb 27, 2006•76 citations

Development of Submicrometer Circuit Elements for Ultrasensitive DC SQUIDs

Mauro Esattore, Oliver Kieler, Michael Paulsen +5 more

The direct current superconducting quantum in terference device (dc SQUID) sensor represents one of the most established applications of superconductor technology due to its sensitivity to magnetic flux. In this work, we present superconducting “fine-pitch” input coils with sub-micrometer parameters fabricated with electron beam lithography (EBL) that will be integrated into existing Nb/Al-AlOx/Nb-based SQUID sensor designs. The aim is to reduce inductive losses of the signal to-SQUID coupling without compromising the overall device layout. In a SQUID current sensor, maximization of the inductive coupling constant k between the signal input coil and the SQUID loop results in a low coupled energy sensitivity ϵc = ϵ/k2where ϵ is the intrinsic energy sensitivity. The fine-pitch coils are expected to increase the inductive coupling constant k as well as extend the range of input coil inductance for our existing devices. The SQUID energy sensitivity ϵ ∼ √CJJcan be lowered by reducing the Josephson junction (JJ) capacitance CJJ. We are developing a process, also based on EBL, to fabricate window-type JJs with sub-micrometer lateral size to obtain reduced JJ capacitances. Details concerning design aspects of the components, their fabrication and characterization results are provided in this paper.

IEEE Transactions on Applied Superconductivity•Jun 3, 2026•0 citations

Performance of dc SQUIDs with resistively shunted inductance

Vittorio Foglietti, W. J. Gallagher, M. B. Ketchen +3 more

We have fabricated and characterized the noise performance of well-coupled Nb-Pb alloy edge junction dc superconducting quantum interference devices (SQUIDs) with a resistively shunted inductance. The extra damping resistor removes the resonances in the current-voltage characteristics resulting in a very low value of the extrinsic energy sensitivity in flux-locked-loop operation. Numerical simulations, with the junction capacitance included, indicate that the damping resistance does not degrade noise performance until it is significantly less than the junction-shunting resistance. We also tested different SQUID designs and demonstrated that a large SQUID inductance, proposed earlier to be desirable when resistively shunted, can seriously affect the low-frequency flux noise.

Applied Physics Letters•Oct 2, 1989•45 citations

Multiplexing technology based on SQUID for readout of superconducting transition-edge sensor arrays

Xinyu Wu, Qing Yu, Yongcheng He +2 more

Multiplexing technologies based on superconducting quantum interference devices (SQUIDs) are crucial to cryogenic readout of superconducting transition-edge sensor (TES) arrays. Demands for large-scale TES arrays promote the development of multiplexing technologies towards large multiplexing factors and low readout noise. The development of multiplexing technologies also facilitates new applications of TES arrays in a wide range of frequencies. Here we summarize different types of SQUID-based multiplexing technologies including time-division multiplexing, code-division multiplexing, frequency-division multiplexing and microwave SQUID multiplexing. The advances and parameter constraints of each multiplexing technology are also discussed.

Chinese Physics B•Apr 22, 2022•6 citations
In this article, we present advancements of our submicrometer cross-typeNb/AlOx/Nb\text{Nb}/ \text{AlO}_{x}/ \text{Nb}Nb/AlOx​/NbJosephson junction technology by implementing an additional highly conductive resistive layer, e.g., for thermalization structures. This allows for shifting the typically observed thermal decoupling of shunt resistors of highly sensitive dc superconducting quantum interference devices (SQUIDs) and SQUID arrays down to temperatures in the millikelvin range. We show results on the technological integration, device design of series SQUID arrays, and their characterization at 4.2 K down to 65 mK. Measurements were performed in an adiabatic demagnetization refrigerator. As an application scenario, we have successfully implemented them as readout circuitry for optical transition edge sensors operated at 150 mK requiring both low-noise and large bandwidth of the readout implemented in a flux-locked loop configuration.
Superconducting transition-edge sensors (TESs) are highly sensitive detectors, can detect electromagnetic wave radiations from millimeter/submillimeter, optical to x/γ rays, suitable for astrophysics, quantum information, and biosensing. Direct current superconducting quantum interference devices (DC SQUIDs) are the detector of choice for TES readout, thanks to their low noise, low impedance, and low power dissipation. In this work, we designed the DC SQUID with a second-order gradient structure, which can effectively mitigate the effect of external magnetic flux. We optimized the fabrication process and successfully fabricated the high-performance DC SQUID with Nb/Al-AlOx/Nb Josephson junctions (critical current density: JC~1μA/μm2). The properties of the fabricated DC SQUID were in good agreement with the simulation results. Meanwhile, the measured flux noise was 6 μΦ0/√Hz, corresponding to a current noise of 100 pA/√Hz. Furthermore, we demonstrated the capability of the DC SQUID to read out the TES detector, including I-V curves, photon pulse response, and noise performance.
Abstract Direct-current superconducting quantum interference devices (dc-SQUIDs) are one of the most sensitive magnetic detectors. These sensors are extensively used in the readout of superconducting transition edge sensors (TESs), which are used for the detection of weak signals. A cosmic microwave background (CMB) polarization telescope operating in 22–48 GHz is currently under developing. The TESs calorimeter of the telescope will be readout by a time-division multiplexer SQUID readout system. We develop a two-stage dc-SQUID amplifier circuit, comprising an input-stage SQUID with 4 SQUID cells and a series SQUID array with 100 SQUID cells. This configuration has been shown to achieve extremely high signal gain while effectively controlling system noise. We assess the system noise at 300 mK in an adiabatic demagnetization refrigerator. The measured magnetic flux noise of the two-stage SQUID circuit system is approximately 0.3 μ Φ 0 / Hz at 10 kHz. The current noise equivalent to the input coil of input SQUID is about 2.4 pA / Hz . This result meets the low-noise readout requirements of the CMB TES and other applications with TES detectors.
User-friendly ultra-high-speed readout electronics for dc superconducting quantum interference devices (SQUIDs) are presented. To maximize the system bandwidth, the SQUID is directly read out without flux modulation. A composite preamplifier is used consisting of a slow dc amplifier in parallel with a fast ac amplifier. In this way, excellent dc precision and a high amplifier bandwidth of 50 MHz are achieved, simultaneously. A virtual 50 Ω amplifier input resistance with negligible excess noise is realized by active shunting, i.e., by applying feedback from preamplifier output to input via a high resistance. The white voltage and current noise levels are 0.33 nV Hz −1 and 2.6 pA Hz −1/2 , respectively. The electronics is fully computer controlled via a microcontroller integrated into the flux-locked loop (FLL) board. Easy-to-use software makes the various electronic settings accessible. A wide bias voltage range of 1.3 mV enables the readout of series SQUID arrays. Furthermore, additional current sources allow the operation of two-stage SQUIDs or transition edge sensors. The electronics was tested using various SQUIDs with input inductances between 30 nH and 1.5 µH. Typically, the maximum FLL bandwidth was 20 MHz, which is close to the theoretical limit given by transmission line delay within the FLL. Slew rates of up to 4.6 Φ 0 µs −1 were achieved with series SQUID arrays. Current noise levels as low as 0.47 pA Hz −1/2 and coupled energy sensitivities between 90 h and 500 h were measured at 4.2 K, where h is the Planck constant. The noise did not degrade when the system bandwidth was increased to the maximum value of about 20 MHz. With a two-stage set-up, intrinsic white energy sensitivities of 30 h and 2.3 h were measured at 4.2 and 0.3 K, respectively.
The direct current superconducting quantum in terference device (dc SQUID) sensor represents one of the most established applications of superconductor technology due to its sensitivity to magnetic flux. In this work, we present superconducting “fine-pitch” input coils with sub-micrometer parameters fabricated with electron beam lithography (EBL) that will be integrated into existing Nb/Al-AlOx/Nb-based SQUID sensor designs. The aim is to reduce inductive losses of the signal to-SQUID coupling without compromising the overall device layout. In a SQUID current sensor, maximization of the inductive coupling constant k between the signal input coil and the SQUID loop results in a low coupled energy sensitivity ϵc = ϵ/k2where ϵ is the intrinsic energy sensitivity. The fine-pitch coils are expected to increase the inductive coupling constant k as well as extend the range of input coil inductance for our existing devices. The SQUID energy sensitivity ϵ ∼ √CJJcan be lowered by reducing the Josephson junction (JJ) capacitance CJJ. We are developing a process, also based on EBL, to fabricate window-type JJs with sub-micrometer lateral size to obtain reduced JJ capacitances. Details concerning design aspects of the components, their fabrication and characterization results are provided in this paper.
We have fabricated and characterized the noise performance of well-coupled Nb-Pb alloy edge junction dc superconducting quantum interference devices (SQUIDs) with a resistively shunted inductance. The extra damping resistor removes the resonances in the current-voltage characteristics resulting in a very low value of the extrinsic energy sensitivity in flux-locked-loop operation. Numerical simulations, with the junction capacitance included, indicate that the damping resistance does not degrade noise performance until it is significantly less than the junction-shunting resistance. We also tested different SQUID designs and demonstrated that a large SQUID inductance, proposed earlier to be desirable when resistively shunted, can seriously affect the low-frequency flux noise.
Multiplexing technologies based on superconducting quantum interference devices (SQUIDs) are crucial to cryogenic readout of superconducting transition-edge sensor (TES) arrays. Demands for large-scale TES arrays promote the development of multiplexing technologies towards large multiplexing factors and low readout noise. The development of multiplexing technologies also facilitates new applications of TES arrays in a wide range of frequencies. Here we summarize different types of SQUID-based multiplexing technologies including time-division multiplexing, code-division multiplexing, frequency-division multiplexing and microwave SQUID multiplexing. The advances and parameter constraints of each multiplexing technology are also discussed.