Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Aberration correction of optical dipole-traps array utilizing phase-modulated holographic technique

P Parkprom, N Chattrapiban, Nithiwadee Thaicharoen

Published Jan 1, 2025• 1 citation
Publisher

Abstract

Abstract Atom arrays generated by optical dipole traps are essential in quantum experiments, enabling precise manipulation and simulation of quantum states. They offer a competitive platform for quantum simulations due to their flexible configurations and local state addressability. However, preparing dipole-trap arrays within a vacuum chamber is challenged by the requirement for the laser beam to pass through multiple optical components which can induce deviations in the laser beam profile and cause aberrations in the system. To address this issue, we apply a holographic phase pattern to correct the aberration of an array of optical dipole traps according to these optical elements. We start with embedding the phase patterns into an SLM to generate the array of optical dipole traps. We then examine the aberrations induced by each optical element and develop methods for their correction. This is implemented by feeding back the modified phase pattern to restore the intended array pattern and eliminate aberrations using the modified Gerchberg–Saxton algorithm. This research enables the precise preparation of optical dipole trap arrays, which are crucial for future work in developing cold single-atom arrays prepared in a vacuum system.

DOI
10.1088/1742-6596/2934/1/012018

Related papers

Aberration compensation of optical tweezers for single-atom array

Jiayi Hou, Yu 玉 Jia 贾, Wen-Jun 文君 Xiao 夏 +5 more

Abstract High-precision preparation of holographic optical tweezers, which is a critical requirement for neutral atom quantum computing platforms, faces the challenge of system aberrations that degrade trap performance. In this paper, we propose a simple and efficient aberration correction algorithm for wavefront-sensorless optical systems, based on correcting the relative lateral shift of diffracted light across spatial regions. Applied to a cold atomic system, this technique demonstrates active correction of aberrations up to several wavelengths, reducing them to a peak-to-valley difference of 0.19(3) λ . The diffraction spot quality and optical trap depth are significantly improved after aberration correction. Combined with subsequent array optimization, the technique enables the generation of uniform optical trap arrays with enhanced atom-loading efficiency. The method requires no prior wavefront information or additional hardware, utilizing only an SLM and a standard CCD camera. Its computational efficiency and hardware simplicity make it broadly applicable to fields such as laser lithography and microscopy.

Chinese Physics B•Dec 16, 2025•0 citations

Full-field-of-view aberration correction for large arrays of focused beams

Yohann Machu, Gautier Creutzer, Clément Sayrin +1 more

We propose and implement an aberration correction method for the creation of extended arrays of spots well beyond the isoplanatic region of any optical system. The method relies on an extensive calibration of aberrations in terms of Zernike polynomials over the full accessible field of an optical system. We introduce a modified Gerchberg-Saxton algorithm for generating holographic phase masks creating fully corrected arbitrary arrays of spots. By applying the method to an aspherical lens, and using a liquid-crystal spatial light modulator (SLM), we increase the aberration-free field of view from 50 to 500 $μ$m, only limited by the largest diffraction angles accessible to the SLM. This opens new perspectives for the generation of large arrays of optical tweezers, especially for neutral atom based quantum processors and simulators.

physics.opticsCross-listedarXiv:2512.15967•Dec 19, 2025

The Simulation of Direct Phase Addition for 3D optical tweezers

Piyawat Chatchaichompu, S Sungthong, Nithiwadee Thaicharoen +1 more

Abstract One of the essential requirements for atom-based technology is controlling the position and characterizing interactions between atoms and their environment. Optical tweezers are crucial for positioning atoms precisely. Typically, quantum technology research utilizes two-dimensional optical tweezers planar arrays, which are limited in manipulating atoms at different depths of field. To address this issue, three-dimensional optical tweezers can be simulated using a modulated phase mask of a Gaussian laser beam. The phase mask is computed using the direct phase addition (DPA) method with a weight factor, and the angular spectrum method (ASM) is employed to propagate a 2D intensity pattern transversely through the beam, layer by layer. Our results showed that the position of each trap can be adjusted to desire positions in 3D with a global weight factor. Furthermore, our analysis demonstrates that increasing resolution improves measurement precision. Utilizing 3D atom arrays enhances quantum simulation capabilities, providing better insights into complex phenomena. The results of this investigation will be applied to a spatial light modulator in a real setup for an ultra-cold atom trapping experiment.

Journal of Physics Conference Series•Jan 1, 2025•0 citations

Holographic generation of microtrap arrays for single atoms by use of a programmable phase modulator

S. Bergamini, Benoît Darquié, M. P. A. Jones +3 more

We have generated multiple micrometer-sized optical dipole traps for neutral atoms using holographic techniques with a programmable liquid-crystal spatial light modulator. The setup allows storing of a single atom per trap and addressing and manipulation of individual trapping sites.

arXiv:quant-ph/0402020•Journal of the Optical Society of America B•Nov 1, 2004•198 citations

Holographic generation of micro-trap arrays for single atoms

S. Bergamini, Benoît Darquié, Matt Jones +3 more

We have generated multiple micron-sized optical dipole traps for neutral atoms using holographic techniques with a programmable liquid crystal spatial light modulator. The setup allows the storing of a single atom per trap, and the addressing and manipulation of individual trapping sites.

Conference on Lasers and Electro-Optics•Jan 1, 2004•4 citations

Holographic optical manipulation of trapped ions for quantum simulation

Chung-You Shih, Sainath Motlakunta, Manas Sajjan +4 more

Trapped ion is one of the leading platforms for quantum simulation experiment due to its long coherence time and high fidelity state initialization, detection, and manipulation. To individually address ions at a single-ion level, it requires sophisticated optical engineering. In the thesis, we present a novel single qubit addressing system that is immune to imperfections of optical imaging and can scale to different size of the system. The technique is based on digital light processing with a commercially available digital micro-mirror device (DMD). \n \nA DMD is a 2D array that consists of tiny micro-mirrors that can be individually manipulated. It is commonly used in movie projectors to modulate the intensity of the light to create the desired image. However, using this technology to ions will require more sophisticated controls over optical wavefronts of the laser beams, for example, the necessity to manipulate the optical phase. It can be achieved by using the DMD as a programmable hologram, which can then be used to characterize and compensate for any imaging imperfections as well. We developed a new iterative Fourier transform algorithm (IFTA) for calculating the holograms. In the simulation, our algorithm shows more than one order of magnitude improvement in accuracy comparing to previously proposed algorithms. We experimentally demonstrated this holographic beam shaping technique with the optical aberration being compensated. The laser we used in the experiment is in the ultraviolet (UV) regime that is close to the optical transition used for manipulating $^{171}\\mathrm{Yb}^+$ qubits. The short wavelength makes it more susceptible to environmental disturbance. \n \nAlso, we proposed and experimentally demonstrated a new scheme that enables holographic controls over lights with multiple laser frequencies simultaneously by combing the DMD with an acousto-optical modulator (AOM). The AOM splits the light and illuminates different zones of the DMD. Each zone has its own hologram forming one frequency channel for addressing. This opens the possibility to engineer more complex Hamiltonian for quantum simulation. For example, we can engineer arbitrary spin-spin interaction graphs by applying the M\\o lmer-S\\o rensen scheme on this new setup.

Bulletin of the American Physical Society•Jun 4, 2020•0 citations
Abstract Atom arrays generated by optical dipole traps are essential in quantum experiments, enabling precise manipulation and simulation of quantum states. They offer a competitive platform for quantum simulations due to their flexible configurations and local state addressability. However, preparing dipole-trap arrays within a vacuum chamber is challenged by the requirement for the laser beam to pass through multiple optical components which can induce deviations in the laser beam profile and cause aberrations in the system. To address this issue, we apply a holographic phase pattern to correct the aberration of an array of optical dipole traps according to these optical elements. We start with embedding the phase patterns into an SLM to generate the array of optical dipole traps. We then examine the aberrations induced by each optical element and develop methods for their correction. This is implemented by feeding back the modified phase pattern to restore the intended array pattern and eliminate aberrations using the modified Gerchberg–Saxton algorithm. This research enables the precise preparation of optical dipole trap arrays, which are crucial for future work in developing cold single-atom arrays prepared in a vacuum system.
Abstract High-precision preparation of holographic optical tweezers, which is a critical requirement for neutral atom quantum computing platforms, faces the challenge of system aberrations that degrade trap performance. In this paper, we propose a simple and efficient aberration correction algorithm for wavefront-sensorless optical systems, based on correcting the relative lateral shift of diffracted light across spatial regions. Applied to a cold atomic system, this technique demonstrates active correction of aberrations up to several wavelengths, reducing them to a peak-to-valley difference of 0.19(3) λ . The diffraction spot quality and optical trap depth are significantly improved after aberration correction. Combined with subsequent array optimization, the technique enables the generation of uniform optical trap arrays with enhanced atom-loading efficiency. The method requires no prior wavefront information or additional hardware, utilizing only an SLM and a standard CCD camera. Its computational efficiency and hardware simplicity make it broadly applicable to fields such as laser lithography and microscopy.
We propose and implement an aberration correction method for the creation of extended arrays of spots well beyond the isoplanatic region of any optical system. The method relies on an extensive calibration of aberrations in terms of Zernike polynomials over the full accessible field of an optical system. We introduce a modified Gerchberg-Saxton algorithm for generating holographic phase masks creating fully corrected arbitrary arrays of spots. By applying the method to an aspherical lens, and using a liquid-crystal spatial light modulator (SLM), we increase the aberration-free field of view from 50 to 500 μμμm, only limited by the largest diffraction angles accessible to the SLM. This opens new perspectives for the generation of large arrays of optical tweezers, especially for neutral atom based quantum processors and simulators.
Abstract One of the essential requirements for atom-based technology is controlling the position and characterizing interactions between atoms and their environment. Optical tweezers are crucial for positioning atoms precisely. Typically, quantum technology research utilizes two-dimensional optical tweezers planar arrays, which are limited in manipulating atoms at different depths of field. To address this issue, three-dimensional optical tweezers can be simulated using a modulated phase mask of a Gaussian laser beam. The phase mask is computed using the direct phase addition (DPA) method with a weight factor, and the angular spectrum method (ASM) is employed to propagate a 2D intensity pattern transversely through the beam, layer by layer. Our results showed that the position of each trap can be adjusted to desire positions in 3D with a global weight factor. Furthermore, our analysis demonstrates that increasing resolution improves measurement precision. Utilizing 3D atom arrays enhances quantum simulation capabilities, providing better insights into complex phenomena. The results of this investigation will be applied to a spatial light modulator in a real setup for an ultra-cold atom trapping experiment.
Trapped ion is one of the leading platforms for quantum simulation experiment due to its long coherence time and high fidelity state initialization, detection, and manipulation. To individually address ions at a single-ion level, it requires sophisticated optical engineering. In the thesis, we present a novel single qubit addressing system that is immune to imperfections of optical imaging and can scale to different size of the system. The technique is based on digital light processing with a commercially available digital micro-mirror device (DMD). \n \nA DMD is a 2D array that consists of tiny micro-mirrors that can be individually manipulated. It is commonly used in movie projectors to modulate the intensity of the light to create the desired image. However, using this technology to ions will require more sophisticated controls over optical wavefronts of the laser beams, for example, the necessity to manipulate the optical phase. It can be achieved by using the DMD as a programmable hologram, which can then be used to characterize and compensate for any imaging imperfections as well. We developed a new iterative Fourier transform algorithm (IFTA) for calculating the holograms. In the simulation, our algorithm shows more than one order of magnitude improvement in accuracy comparing to previously proposed algorithms. We experimentally demonstrated this holographic beam shaping technique with the optical aberration being compensated. The laser we used in the experiment is in the ultraviolet (UV) regime that is close to the optical transition used for manipulating 171mathrmYb+^{171}\\mathrm{Yb}^+171mathrmYb+ qubits. The short wavelength makes it more susceptible to environmental disturbance. \n \nAlso, we proposed and experimentally demonstrated a new scheme that enables holographic controls over lights with multiple laser frequencies simultaneously by combing the DMD with an acousto-optical modulator (AOM). The AOM splits the light and illuminates different zones of the DMD. Each zone has its own hologram forming one frequency channel for addressing. This opens the possibility to engineer more complex Hamiltonian for quantum simulation. For example, we can engineer arbitrary spin-spin interaction graphs by applying the M\\o lmer-S\\o rensen scheme on this new setup.