Disseminable single-photon source for quantum radiometry
Hristina Georgieva, Thomas Gerrits, Lijun Ma, Riley B. Dawkins, Marco López, Oliver Slattery, Niklas Kanold, Arsenty Kaganskiy, Sven Rodt, Stephan Reitzenstein, Alan L. Migdall, S. Kück
We present a disseminable single-photon source based on an InGaAs quantum dot in a micro-mesa. This source achieves a maximum photon flux of (2.74 ± 0.03) × 106 photons/s at a wavelength of (929.7 ± 0.1) nm, with a multiphoton suppression of g(2)(0) = 0.22 ± 0.02. The semiconductor chip can be installed in any cryogenic system and the compact size of all optical components facilitates easy dissemination for interlaboratory comparisons. The consistency in results regarding single-photon purity and the similarity of the measured photon fluxes across two distinct laboratory environments underscores the robustness and versatility of this single-photon source, which shows its potential to be used as a standard source for interlaboratory comparisons in quantum radiometry.
We present a disseminable single-photon source based on an InGaAs quantum dot in a micro-mesa. This source achieves a maximum photon flux of (2.74 ± 0.03) × 106 photons/s at a wavelength of (929.7 ± 0.1) nm, with a multiphoton suppression of g(2)(0) = 0.22 ± 0.02. The semiconductor chip can be installed in any cryogenic system and the compact size of all optical components facilitates easy dissemination for interlaboratory comparisons. The consistency in results regarding single-photon purity and the similarity of the measured photon fluxes across two distinct laboratory environments underscores the robustness and versatility of this single-photon source, which shows its potential to be used as a standard source for interlaboratory comparisons in quantum radiometry.
Abstract We present a comprehensive metrological characterization of a commercial single-photon source with high photon flux emission for use in radiometry. The source is based on an InGaAs quantum dot in a micropillar. A comparative analysis of two excitation schemes—phonon-assisted excitation and two-photon excitation—explores differences in excitation power dependence, temporal stability and single-photon purity. The commercial source exhibits excellent properties for the field of quantum radiometry, achieving simultaneously a photon flux of (17.19 ± 0.09) million photons/s for a pulse repetition rate of 79.4 MHz, and a single-photon purity of 98%. Its optical power of (3.68 ± 0.02) pW is directly determined with a traceably calibrated low-noise photodiode. The ability to directly compare the photocurrent in a low-noise photodiode with the count rate at a single-photon avalanche detector allows for a seamless transition between the classical and quantum realizations of optical power. Therefore, we were able to build another bridge between classical and quantum radiometry by using a deterministic single-photon source.
Abstract The traceability of measurements of the parameters characterizing single-photon sources, such as photon flux and optical power, paves the way towards their reliable comparison and quantitative evaluation. In this paper, we present an absolute measurement of the optical power of a single-photon source based on an InGaAs quantum dot under pulsed excitation with a calibrated single-photon avalanche diode (SPAD) detector. For this purpose, a single excitonic line of the quantum dot emission with a bandwidth below 0.1 nm was spectrally filtered by using two tilted interference filters. Since high count rates are essential for many metrological applications, we optimized the setup efficiency by combining high overall transmission of the optical components with a geometrical enhancement of the extraction efficiency of a single quantum dot by a monolithic microlens to reach photon fluxes up to 3.7 ⋅ 10 5 photons per second at the SPADs. A relative calibration of two SPAD detectors with a relative standard uncertainty of 0.7% was carried out and verified by the standard calibration method using an attenuated laser. Finally, an Allan deviation analysis was performed giving an optimal averaging time of 92 s for the photon flux.
Abstract Single-photon sources have a variety of applications. One of these is quantum radiometry, which is reported on in this paper in the form of an overview, specifically of the current state of the art in the application of deterministic single photon sources to the calibration of single photon detectors. To optimize single-photon sources for this purpose, extensive research is currently carried out at the European National Metrology Institutes (NMIs), in collaboration with partners from universities. Single-photon sources of different types are currently under investigation, including sources based on defect centres in (nano-)diamonds, on molecules and on semiconductor quantum dots. We will present, summarise, and compare the current results obtained at European NMIs for single-photon sources in terms of photon flux, single-photon purity, and spectral power distribution as well as the results of single-photon detector calibrations carried out with this type of light sources.
Abstract Single‐photon sources (SPSs) based on quantum emitters hold promise in quantum radiometry as metrology standard for photon fluxes at the low light level. Ideally this requires control over the photon flux in a wide dynamic range, sub‐Poissonian photon statistics, and narrow‐band emission spectrum. In this work, a monochromatic SPS based on an organic dye molecule is presented, whose photon flux is traceably measured to be adjustable between 144 000 and 1320 000 photons per second at a wavelength of (785.6 ± 0.1) nm, corresponding to an optical radiant flux between 36.5 and 334 fW. The high purity of the single‐photon stream is verified, with a second‐order autocorrelation function at zero time delay below 0.1 throughout the whole range. Such molecule‐based SPS is hence used for the calibration of a single‐photon avalanche detector against a low‐noise analog photodiode traceable to the primary standard for optical radiant flux (i.e., the cryogenic radiometer). Due to the narrow bandwidth of the source, corrections to the detector efficiency arising from the spectral power distribution are negligible. With this major advantage, the developed device may finally realize a low‐photon‐flux standard source for quantum radiometry.
We describe the development and applications of a single-photon source based on a quantum dot embedded in a semiconductor nanowire, which can be precision-tuned to emit ∼1ns long photons at wavelengths that match the transitions of caesium D1 line. We discuss interfacing such single-photon source with atomic ensembles and present our experimental results demonstrating a new method of tuning the emission of the quantum dot by condensing inert gas (N2) on the nanowire. Next, we describe how these single photons at ∼895nm can be efficiently converted to wavelength suitable for satellite QKD links (∼794 nm) and optical fiber links (∼1469 nm) using a laser-cooled atomic ensemble that is loaded and confined inside a hollow-core optical fiber. Lastly, we inroduce our proposal of integrating the semiconductor nanowire with a lensed fiber to create a compact single-photon source with improved photon-collection efficiency compared to conventional setups.
Realization of quantum optical circuits is at the heart of quantum photonic information processing. A long-standing obstacle, however, has been the absence of a suitable platform of single photon sources (SPSs). Such SPSs need to be in spatially ordered arrays and produce, on-demand, highly pure, and indistinguishable single photons with sufficiently uniform emission characteristics to enable controlled interference between photons from distinct sources underpinning functional quantum optical networks. We report on such a platform of SPSs based on a unique class of epitaxial quantum dots dubbed mesa-top single quantum dot. Under resonant excitation, the spatially ordered SPSs (without Purcell enhancement) show single photon purity of >99% [ g (2) (0) ~ 0.015], high two-photon Hong-Ou-Mandel interference visibilities of 0.82 ± 0.03 (at 11.5 kelvin, without cavity), and spectral nonuniformity of <3 nanometers, within established locally tunable technology. Our platform of SPSs paves the path to creating on-chip scalable quantum photonic networks for communication, computation, simulation, sensing and imaging.