Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Proposal for a controllable chip-based electrostatic double well for cold-molecule trapping

Qing Liu, Wenli Li, Chenyue Pan, Qi Zhou, Tao Yang, Shunyong Hou, Jianping Yin

Published Dec 19, 2024• 0 citations
Publisher

Abstract

Over the past two decades, a chip-based atom double well has matured as a powerful art with many applications in modern science. However, its molecular counterpart, which holds potential for higher precision and broader science, has been little studied. In this paper, we propose a scheme for chip-based electrostatic double-well potential for polar molecules. The structure consists of two square wires and three square electrodes deposited on an insulating chip. By adjusting the applied voltages, versatile operations on the double well can be easily realized, such as precisely changing the depth and height of the double well, dynamically deforming the double-well potential to a single well and vice versa, and adjusting the double well from symmetric to asymmetric. We have developed numerical and analytical methods to verify the feasibility of our scheme with both light ($^{15}\mathrm{ND}_{3}$) and heavy ($^{202}\mathrm{Hg}^{19}\mathrm{F}$) polar molecules. The microscopic integrated double-well potential presents a promising platform for confined molecule interferometry. Also, it provides new perspectives for the study of cold collisions, sympathetic cooling, quantum information processing, and quantum simulation.

DOI
10.1103/physreva.110.063319

Related papers

A controllable electrostatic double-well trap for cold polar molecules

Xu Xue-Yan, Chen Hai-Bo, Yin Jianping +1 more

We propose a novel controllable electrostatic double-well trap scheme by using two charged ring wires and two parallel transparent electrodes. The spatial distributions of the electrostatic field from the above charged wires and the charged plates are calculated. We also analyze the advantages of the proposed scheme, and discuss the loading process of cold molecules from a cold molecular beam into our trap. Our study shows that our controllable double-well trap is not only convenient to trap, manipulate and control cold polar molecules in the weak-field-seeking states, but also has the potential applications in molecule optics field,such as molecular interference, molecular entanglement, and molecular collisions, even to study the molecular BEC in the double-well trap, and so on.

Acta Physica Sinica•Jan 1, 2009•2 citations

Chip-based microtrap arrays for cold polar molecules

Shunyong Hou, Bin Wei, Lianzhong Deng +1 more

Compared to the atomic chip, which has been a powerful platform to perform an astonishing range of applications from rapid Bose-Einstein condensate (BEC) production to the atomic clock, the molecular chip is only in its infant stages. Recently a one-dimensional electric lattice was demonstrated to trap polar molecules on a chip. This excellent work opens up the way to building a molecular chip laboratory. Here we propose a two-dimensional (2D) electric lattice on a chip with concise and robust structure, which is formed by arrays of squared gold wires. Arrays of microtraps that originate in the microsize electrodes offer a steep gradient and thus allow for confining both light and heavy polar molecules. Theoretical analysis and numerical calculations are performed using two types of sample molecules, $\mathrm{N}{\mathrm{D}}_{3}$ and SrF, to justify the possibility of our proposal. The height of the minima of the potential wells is about 10 \ensuremath{\mu}m above the surface of the chip and can be easily adjusted in a wide range by changing the voltages applied on the electrodes. These microtraps offer intriguing perspectives for investigating cold molecules in periodic potentials, such as quantum computing science, low-dimensional physics, and some other possible applications amenable to magnetic or optical lattice. The 2D adjustable electric lattice is expected to act as a building block for a future gas-phase molecular chip laboratory.

Physical Review A•Dec 20, 2017•10 citations

Adiabatic cooling for cold polar molecules on a chip using a controllable high-efficiency electrostatic surface trap

Shengqiang Li, Liang Xu, Yong Xia +2 more

We propose a controllable high-efficiency electrostatic surface trap for cold polar molecules on a chip by using two insulator-embedded charged rings and a grounded conductor plate. We calculate Stark energy structure pattern of ND3 molecules in an external electric field using the method of matrix diagonalization. We analyze how the voltages that are applied to the ring electrodes affect the depth of the efficient well and the controllability of the distance between the trap center and the surface of the chip. To obtain a better understanding, we simulate the dynamical loading and trapping processes of ND 3 molecules in a | J , KM 〉 = |1, − 1〉 state by using classical Monte—Carlo method. Our study shows that the loading efficiency of our trap can reach ∼ 88%. Finally, we study the adiabatic cooling of cold molecules in our surface trap by linearly lowering the potential-well depth (i.e., lowering the trapping voltage), and find that the temperature of the trapped ND3 molecules can be adiabatically cooled from 34.5 mK to ∼ 5.8 mK when the trapping voltage is reduced from −35 kV to −3 kV.

Chinese Physics B•Nov 28, 2014•9 citations

Controllable electrostatic surface storage ring with opened optical access for cold polar molecules on a chip

Shengqiang Li, Liang Xu, Lianzhong Deng +1 more

In order to meet the demands for laser manipulations and detection of cold molecules, we propose an optically accessible and controllable electrostatic surface storage ring for cold polar molecules on a chip, which is one based on extension and application of the three-wire surface guiding scheme [J. Opt. Soc. Am. B25, 1214 (2008)]. To our knowledge, this is the first real surface storage ring scheme. The spatial distribution of the electrostatic fields generated by two insulator-embedded charged rings and a grounded conductor plate is numerically calculated. Relationships between the height of the trap center above the surface and the setup parameters are analyzed in detail. Using OH radical molecules as a tester, the range of molecular velocities that the storage ring can confine is investigated. The dynamical process of weak-field-seeking OH molecules of state |J,KM〉=|3/2,−9/4〉 being loaded into and confined in the storage ring is studied using Monte Carlo simulations. Dependencies of translational temperature of molecules and their trapping efficiency in the storage ring on parameters of the setup and the initial molecular beam are examined. By incorporating a bunching function into our scheme, the number of round trips a trapped molecular packet makes can be improved by almost three times before getting spread out to fill the whole storage ring, as confirmed by numerical simulations.

Journal of the Optical Society of America B•Dec 13, 2013•6 citations

Chip-based controllable Ioffe-typed electrostatic mirotrap for cold molecules

Xu Xue-Yan, Hou Shun-Yong, Yin Jianping

Trapping particles (atoms or molecules) allows long interaction time and therefore potentially high resolution in precision measurements. Moreover, the particles in the trap are thermally isolated from the outside world and can be cooled to very low temperatures. As a result, the atomic (or molecular) traps have been widely used in many research areas. However, the molecules in these traps exhibiting zero field in the trap center undergo nonadiabatic transitions, which is the major loss of particles. The loss of atoms in this type of trap seriously hinders the generation of the first BEC (Bose-Einstein condensates). In this paper, we propose a chip-based controllable Ioffe-type electrostatic mirotrap, in which nonadabatic loss can be avoided due to the non-zero electric field. The mirotrap is composed of a pair of L-typed gold wires, which is 1 m in height and deposited on a glass substrate. The non-zero potential well originated in the microsize electrodes offers a steep gradient enable to trap low-field-seeking state polar molecules. The electric field strength in the trap center can be changed in a wide range by adjusting the applied voltage or/and the widths of the electrodes. For instance, under the conditions in the paper, the electric field strength in the trap center can be changed from 0.15 to 5.5 kV/cm. The height of the potential well is about 10 m above the chip and can also be tuned in a large range by adjusting the parameters of the electrodes. Under the conditions in the paper, the height of the potential well can be adjusted from 6.0 to 17.0 m. The electric fields of the microtrap near the surface of the chip are calculated by using a finite element software. Monte-Carlo simulations of the loading and the trapping processes are also carried out in order to justify the feasibility of our scheme. Taking ND3 molecules for example, the loading efficiency of molecules as a function of longitudinal velocity of molecular packet is studied. Our proposed surface microtrap can be used not only for integrating the molecular chips but also for producing the quantum degenerate gas near the chip surface. It offers a platform for many research fields such as precision measurements, quantum computing, surface cold collisions and cold chemistry.

Acta Physica Sinica•Jan 1, 2018•0 citations

Controllable chip-based beam splitter for cold polar molecules

Xu Xue-Yan, Tao Yang, Shunyong Hou +1 more

We proposed a $\mathsf{Y}$-shaped molecular beam splitter for guided polar molecules, composed by several 1-\ensuremath{\mu}m-thick gold electrodes deposited on a chip. The splitter has a total length of 10 mm and the height of the electrostatic guiding center (minimum of the electric fields) is about 100 \ensuremath{\mu}m from the surface of the chip. Our theoretical analysis and trajectory calculations are carried out using two types of polar molecules of ammonia-${\mathrm{D}}_{3}$ ($\mathrm{N}{\mathrm{D}}_{3}$) and strontium fluoride (SrF). The calculated results show explicitly that, by applying a few hundred volts on the electrodes, the splitter can direct the guided (light or heavy) polar molecules to either of the two outgoing arms with any desired ratio (from 0% to 100%) by changing the voltages applied on the electrodes. This chip-scale molecular beam splitter offers a platform for molecular optics, precision measurements, and quantum computation. This basic optical element could be integrated into molecular chips and serve as a building block for a future gas-phase molecular laboratory on a chip.

Physical Review A•Jul 15, 2019•2 citations
Over the past two decades, a chip-based atom double well has matured as a powerful art with many applications in modern science. However, its molecular counterpart, which holds potential for higher precision and broader science, has been little studied. In this paper, we propose a scheme for chip-based electrostatic double-well potential for polar molecules. The structure consists of two square wires and three square electrodes deposited on an insulating chip. By adjusting the applied voltages, versatile operations on the double well can be easily realized, such as precisely changing the depth and height of the double well, dynamically deforming the double-well potential to a single well and vice versa, and adjusting the double well from symmetric to asymmetric. We have developed numerical and analytical methods to verify the feasibility of our scheme with both light (15ND3^{15}\mathrm{ND}_{3}15ND3​) and heavy (202Hg19F^{202}\mathrm{Hg}^{19}\mathrm{F}202Hg19F) polar molecules. The microscopic integrated double-well potential presents a promising platform for confined molecule interferometry. Also, it provides new perspectives for the study of cold collisions, sympathetic cooling, quantum information processing, and quantum simulation.
We propose a novel controllable electrostatic double-well trap scheme by using two charged ring wires and two parallel transparent electrodes. The spatial distributions of the electrostatic field from the above charged wires and the charged plates are calculated. We also analyze the advantages of the proposed scheme, and discuss the loading process of cold molecules from a cold molecular beam into our trap. Our study shows that our controllable double-well trap is not only convenient to trap, manipulate and control cold polar molecules in the weak-field-seeking states, but also has the potential applications in molecule optics field,such as molecular interference, molecular entanglement, and molecular collisions, even to study the molecular BEC in the double-well trap, and so on.
Compared to the atomic chip, which has been a powerful platform to perform an astonishing range of applications from rapid Bose-Einstein condensate (BEC) production to the atomic clock, the molecular chip is only in its infant stages. Recently a one-dimensional electric lattice was demonstrated to trap polar molecules on a chip. This excellent work opens up the way to building a molecular chip laboratory. Here we propose a two-dimensional (2D) electric lattice on a chip with concise and robust structure, which is formed by arrays of squared gold wires. Arrays of microtraps that originate in the microsize electrodes offer a steep gradient and thus allow for confining both light and heavy polar molecules. Theoretical analysis and numerical calculations are performed using two types of sample molecules, ND3\mathrm{N}{\mathrm{D}}_{3}ND3​ and SrF, to justify the possibility of our proposal. The height of the minima of the potential wells is about 10 \ensuremath{\mu}m above the surface of the chip and can be easily adjusted in a wide range by changing the voltages applied on the electrodes. These microtraps offer intriguing perspectives for investigating cold molecules in periodic potentials, such as quantum computing science, low-dimensional physics, and some other possible applications amenable to magnetic or optical lattice. The 2D adjustable electric lattice is expected to act as a building block for a future gas-phase molecular chip laboratory.
We propose a controllable high-efficiency electrostatic surface trap for cold polar molecules on a chip by using two insulator-embedded charged rings and a grounded conductor plate. We calculate Stark energy structure pattern of ND3 molecules in an external electric field using the method of matrix diagonalization. We analyze how the voltages that are applied to the ring electrodes affect the depth of the efficient well and the controllability of the distance between the trap center and the surface of the chip. To obtain a better understanding, we simulate the dynamical loading and trapping processes of ND 3 molecules in a | J , KM 〉 = |1, − 1〉 state by using classical Monte—Carlo method. Our study shows that the loading efficiency of our trap can reach ∼ 88%. Finally, we study the adiabatic cooling of cold molecules in our surface trap by linearly lowering the potential-well depth (i.e., lowering the trapping voltage), and find that the temperature of the trapped ND3 molecules can be adiabatically cooled from 34.5 mK to ∼ 5.8 mK when the trapping voltage is reduced from −35 kV to −3 kV.
In order to meet the demands for laser manipulations and detection of cold molecules, we propose an optically accessible and controllable electrostatic surface storage ring for cold polar molecules on a chip, which is one based on extension and application of the three-wire surface guiding scheme [J. Opt. Soc. Am. B25, 1214 (2008)]. To our knowledge, this is the first real surface storage ring scheme. The spatial distribution of the electrostatic fields generated by two insulator-embedded charged rings and a grounded conductor plate is numerically calculated. Relationships between the height of the trap center above the surface and the setup parameters are analyzed in detail. Using OH radical molecules as a tester, the range of molecular velocities that the storage ring can confine is investigated. The dynamical process of weak-field-seeking OH molecules of state |J,KM〉=|3/2,−9/4〉 being loaded into and confined in the storage ring is studied using Monte Carlo simulations. Dependencies of translational temperature of molecules and their trapping efficiency in the storage ring on parameters of the setup and the initial molecular beam are examined. By incorporating a bunching function into our scheme, the number of round trips a trapped molecular packet makes can be improved by almost three times before getting spread out to fill the whole storage ring, as confirmed by numerical simulations.
Trapping particles (atoms or molecules) allows long interaction time and therefore potentially high resolution in precision measurements. Moreover, the particles in the trap are thermally isolated from the outside world and can be cooled to very low temperatures. As a result, the atomic (or molecular) traps have been widely used in many research areas. However, the molecules in these traps exhibiting zero field in the trap center undergo nonadiabatic transitions, which is the major loss of particles. The loss of atoms in this type of trap seriously hinders the generation of the first BEC (Bose-Einstein condensates). In this paper, we propose a chip-based controllable Ioffe-type electrostatic mirotrap, in which nonadabatic loss can be avoided due to the non-zero electric field. The mirotrap is composed of a pair of L-typed gold wires, which is 1 m in height and deposited on a glass substrate. The non-zero potential well originated in the microsize electrodes offers a steep gradient enable to trap low-field-seeking state polar molecules. The electric field strength in the trap center can be changed in a wide range by adjusting the applied voltage or/and the widths of the electrodes. For instance, under the conditions in the paper, the electric field strength in the trap center can be changed from 0.15 to 5.5 kV/cm. The height of the potential well is about 10 m above the chip and can also be tuned in a large range by adjusting the parameters of the electrodes. Under the conditions in the paper, the height of the potential well can be adjusted from 6.0 to 17.0 m. The electric fields of the microtrap near the surface of the chip are calculated by using a finite element software. Monte-Carlo simulations of the loading and the trapping processes are also carried out in order to justify the feasibility of our scheme. Taking ND3 molecules for example, the loading efficiency of molecules as a function of longitudinal velocity of molecular packet is studied. Our proposed surface microtrap can be used not only for integrating the molecular chips but also for producing the quantum degenerate gas near the chip surface. It offers a platform for many research fields such as precision measurements, quantum computing, surface cold collisions and cold chemistry.
We proposed a Y\mathsf{Y}Y-shaped molecular beam splitter for guided polar molecules, composed by several 1-\ensuremath{\mu}m-thick gold electrodes deposited on a chip. The splitter has a total length of 10 mm and the height of the electrostatic guiding center (minimum of the electric fields) is about 100 \ensuremath{\mu}m from the surface of the chip. Our theoretical analysis and trajectory calculations are carried out using two types of polar molecules of ammonia-D3{\mathrm{D}}_{3}D3​ (ND3\mathrm{N}{\mathrm{D}}_{3}ND3​) and strontium fluoride (SrF). The calculated results show explicitly that, by applying a few hundred volts on the electrodes, the splitter can direct the guided (light or heavy) polar molecules to either of the two outgoing arms with any desired ratio (from 0% to 100%) by changing the voltages applied on the electrodes. This chip-scale molecular beam splitter offers a platform for molecular optics, precision measurements, and quantum computation. This basic optical element could be integrated into molecular chips and serve as a building block for a future gas-phase molecular laboratory on a chip.