Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Test Conference (ITC)

qFD: Coherent and Depolarizing Fault Diagnosis for Quantum Processors

Yen-Wei Li, Cheng-Yun Hsieh, M L Wu, James Chien-Mo Li

Published Nov 3, 2024• 0 citations
Publisher

Abstract

Errors caused by faults would strongly affect the correctness of noisy intermediate-scale quantum (NISQ) circuits. In this work, we propose a technique for diagnosing coherent and incoherent faults for NISQ circuits. The proposed technique contains three phases: rough diagnosis, fine diagnosis, and depolarizing diagnosis. Rough diagnosis grid searches the Bloch sphere to locate an approximate range of a coherent fault. Fine diagnosis then precisely locates the coherent fault size based on the narrowed-down search space. At last, depolarizing diagnosis measures the depolarizing fault size. We demonstrate our technique using the Qiskit simulator with noise-free and noisy backends. The diagnosis accuracy between the diagnosed faulty gates and the injected faulty gates is over 99.95%, which is better than traditional quantum process tomography under the same conditions. Our results show that the diagnosis error of coherent faults does not affect the diagnosis accuracy of depolarizing faults. Experiments on the IBM Q devices have also been performed, and results of over 99.83% diagnosis accuracy show that our technique still preserves good resolution on real quantum circuit devices.

DOI
10.1109/itc51657.2024.00038

Related papers

Diagnosis of Quantum Circuits in the NISQ Era

Yumin Li, Cheng-Yun Hsieh, Yen-Wei Li +1 more

Currently, noisy intermediate-scale quantum (NISQ) circuits may not always generate correct outputs due to noise and faults. In this work, we propose a diagnosis technique for NISQ circuits. The proposed technique contains static diagnosis and dynamic diagnosis. Static diagnosis uses a fault dictionary that contains output probability distribution for each fault. Dynamic diagnosis uses binary search to find the accurate fault locations of faulty quantum circuits. We demonstrate our technique using the Qiskit simulator with realistic noise models. We evaluate 15 benchmarks with unitary and non-unitary faults injected. Simulation results show that the average accuracy and resolution are 97.70% and 1.81. Experiments on the IBM Q devices have also been performed, and results show that our technique is feasible on real quantum circuit devices.

IEEE VLSI Test Symposium (VTS)•Apr 24, 2023•4 citations

Detection and diagnosis of faulty quantum circuits

Alexandru Paler, Ilia Polian, John P. Hayes

A new approach to detecting and diagnosing faults in quantum circuits is introduced. In order to account for the probabilistic nature of quantum circuits, collections of test experiments, called binary tomographic tests (BTTs), are generated. A BTT can identify a fault with respect to some user-defined confidence threshold τ. We present an algorithm to generate BTTs that either detect, or ensure the absence of, all modeled faults in a given circuit. We also present an adaptive diagnostic method to locate quantum faults. While classical circuits, even probabilistic ones, only handle ordinary probabilities, quantum circuits deal with quantum states, which have phase as an extra probabilistic parameter. The tomographic testing methods introduced previously for probabilistic circuits are unable to detect differences in phase, and therefore leave many quantum faults undetected. In contrast, we develop a design-for-test method which is specifically intended to detect faults that only affect the phase of a quantum state. We give experimental results for benchmark and random circuits which show high coverage of quantum faults by BTTs, and good resolution in the case of the adaptive diagnosis method.

Asia and South Pacific Design Automation Conference (ASP-DAC)•Jan 1, 2012•16 citations

Detection and Diagnosis of Single Faults in Quantum Circuits

Debajyoti Bera

Detection and isolation of faults is a crucial step in the physical realization of quantum circuits. Even though quantum gates and circuits compute reversible functions, the standard techniques of automatic test pattern generation (ATPG) for classical reversible circuits are not directly applicable to quantum circuits. For faulty quantum circuits under the widely accepted single fault assumption, we show that their behavior can be fully characterized by the (single) faulty gate and the corresponding fault model. This allows us to efficiently determine test input states as well as measurement strategy for fault detection and diagnosis. Building on top of these, we design randomized algorithms which are able to detect every nontrivial single-gate fault with minimal probability of error. We also describe similar algorithms for fault diagnosis. We evaluate our algorithms by the number of output samples that needs to be collected and the probability of error. Both of these can be related to the eigenvalues of the operators corresponding to the circuit gates. We experimentally compare all our strategies with the state-of-the-art ATPG techniques for quantum circuits under the “single missing faulty gate” model and demonstrate that significant improvement is possible if we can exploit the quantum nature of circuits.

IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems•Jun 22, 2017•17 citations

Practical Guide to Quantum Computing: Building Noise Models with IBM Quantum Simulators # 4

Mikhail Pavlov

Abstract This practical guide presents methods for constructing noise models using the Qiskit Aer noise module within the IBM Q ecosystem. The objective is to simulate quantum circuits under realistic error conditions, enabling accurate emulation of noisy quantum processors. The guide demonstrates how to: Use the Qiskit Aer noise module to define custom noise models. Incorporate gate errors, readout errors, and decoherence effects into simulations. Apply noise channels (e.g., depolarizing, amplitude damping, phase damping). Attach noise models to quantum circuit simulations. Analyze how noise affects algorithm performance and output distributions. Building noise models is essential for studying the behavior of quantum algorithms in the NISQ (Noisy Intermediate-Scale Quantum) era. It allows researchers to evaluate algorithm robustness, optimize circuit depth, and test error mitigation strategies before execution on real IBM Quantum hardware. This approach provides a bridge between ideal theoretical circuits and physically realistic quantum devices, enhancing the reliability and applicability of quantum computing experiments.

•Mar 4, 2026•0 citations

Quantum error mitigation via quantum-noise-effect circuit groups

Yusuke Hama, Hirofumi Nishi

Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.

arXiv:2205.13907•Scientific Reports•Mar 13, 2024•12 citations

Practical Error Suppression and Mitigation for Reliable Quantum Computing

Han-Ze Li, Mengjie Yang, Xianquan Yan +3 more

Quantum computing is entering a transitional regime between noisy intermediate-scale quantum (NISQ) processing and early fault-tolerant quantum computation (FTQC), in which increasingly capable hardware is beginning to support repeated syndrome measurements, partial error correction, and logical-qubit operations, while residual physical and logical errors remain non-negligible. In this regime, error suppression, error mitigation, and quantum error correction are increasingly better viewed as complementary layers of a unified error-reduction strategy rather than as separate approaches, with each acting at a different stage of the quantum computation to improve simulation reliability. Thus, in this review, we provide a practical and forward-looking overview of the principal hardware error sources and the corresponding error suppression and mitigation methods for reducing their impact across the current NISQ-FTQC transition. We discuss hardware-aware circuit design, coherent-error suppression, readout mitigation, noise extrapolation, classical inference, and software-supported workflows, with particular emphasis on their implementation on actual quantum processors. We further examine how error mitigation techniques can be adapted to encoded and logical-qubit settings so that they can operate alongside quantum error correction to suppress residual logical errors and improve the accuracy of computation in the early fault-tolerant regime.

quant-pharXiv:2608.20453•Aug 24, 2026•4 citations
Errors caused by faults would strongly affect the correctness of noisy intermediate-scale quantum (NISQ) circuits. In this work, we propose a technique for diagnosing coherent and incoherent faults for NISQ circuits. The proposed technique contains three phases: rough diagnosis, fine diagnosis, and depolarizing diagnosis. Rough diagnosis grid searches the Bloch sphere to locate an approximate range of a coherent fault. Fine diagnosis then precisely locates the coherent fault size based on the narrowed-down search space. At last, depolarizing diagnosis measures the depolarizing fault size. We demonstrate our technique using the Qiskit simulator with noise-free and noisy backends. The diagnosis accuracy between the diagnosed faulty gates and the injected faulty gates is over 99.95%, which is better than traditional quantum process tomography under the same conditions. Our results show that the diagnosis error of coherent faults does not affect the diagnosis accuracy of depolarizing faults. Experiments on the IBM Q devices have also been performed, and results of over 99.83% diagnosis accuracy show that our technique still preserves good resolution on real quantum circuit devices.
Currently, noisy intermediate-scale quantum (NISQ) circuits may not always generate correct outputs due to noise and faults. In this work, we propose a diagnosis technique for NISQ circuits. The proposed technique contains static diagnosis and dynamic diagnosis. Static diagnosis uses a fault dictionary that contains output probability distribution for each fault. Dynamic diagnosis uses binary search to find the accurate fault locations of faulty quantum circuits. We demonstrate our technique using the Qiskit simulator with realistic noise models. We evaluate 15 benchmarks with unitary and non-unitary faults injected. Simulation results show that the average accuracy and resolution are 97.70% and 1.81. Experiments on the IBM Q devices have also been performed, and results show that our technique is feasible on real quantum circuit devices.
A new approach to detecting and diagnosing faults in quantum circuits is introduced. In order to account for the probabilistic nature of quantum circuits, collections of test experiments, called binary tomographic tests (BTTs), are generated. A BTT can identify a fault with respect to some user-defined confidence threshold τ. We present an algorithm to generate BTTs that either detect, or ensure the absence of, all modeled faults in a given circuit. We also present an adaptive diagnostic method to locate quantum faults. While classical circuits, even probabilistic ones, only handle ordinary probabilities, quantum circuits deal with quantum states, which have phase as an extra probabilistic parameter. The tomographic testing methods introduced previously for probabilistic circuits are unable to detect differences in phase, and therefore leave many quantum faults undetected. In contrast, we develop a design-for-test method which is specifically intended to detect faults that only affect the phase of a quantum state. We give experimental results for benchmark and random circuits which show high coverage of quantum faults by BTTs, and good resolution in the case of the adaptive diagnosis method.
Detection and isolation of faults is a crucial step in the physical realization of quantum circuits. Even though quantum gates and circuits compute reversible functions, the standard techniques of automatic test pattern generation (ATPG) for classical reversible circuits are not directly applicable to quantum circuits. For faulty quantum circuits under the widely accepted single fault assumption, we show that their behavior can be fully characterized by the (single) faulty gate and the corresponding fault model. This allows us to efficiently determine test input states as well as measurement strategy for fault detection and diagnosis. Building on top of these, we design randomized algorithms which are able to detect every nontrivial single-gate fault with minimal probability of error. We also describe similar algorithms for fault diagnosis. We evaluate our algorithms by the number of output samples that needs to be collected and the probability of error. Both of these can be related to the eigenvalues of the operators corresponding to the circuit gates. We experimentally compare all our strategies with the state-of-the-art ATPG techniques for quantum circuits under the “single missing faulty gate” model and demonstrate that significant improvement is possible if we can exploit the quantum nature of circuits.
Abstract This practical guide presents methods for constructing noise models using the Qiskit Aer noise module within the IBM Q ecosystem. The objective is to simulate quantum circuits under realistic error conditions, enabling accurate emulation of noisy quantum processors. The guide demonstrates how to: Use the Qiskit Aer noise module to define custom noise models. Incorporate gate errors, readout errors, and decoherence effects into simulations. Apply noise channels (e.g., depolarizing, amplitude damping, phase damping). Attach noise models to quantum circuit simulations. Analyze how noise affects algorithm performance and output distributions. Building noise models is essential for studying the behavior of quantum algorithms in the NISQ (Noisy Intermediate-Scale Quantum) era. It allows researchers to evaluate algorithm robustness, optimize circuit depth, and test error mitigation strategies before execution on real IBM Quantum hardware. This approach provides a bridge between ideal theoretical circuits and physically realistic quantum devices, enhancing the reliability and applicability of quantum computing experiments.
Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.
Quantum computing is entering a transitional regime between noisy intermediate-scale quantum (NISQ) processing and early fault-tolerant quantum computation (FTQC), in which increasingly capable hardware is beginning to support repeated syndrome measurements, partial error correction, and logical-qubit operations, while residual physical and logical errors remain non-negligible. In this regime, error suppression, error mitigation, and quantum error correction are increasingly better viewed as complementary layers of a unified error-reduction strategy rather than as separate approaches, with each acting at a different stage of the quantum computation to improve simulation reliability. Thus, in this review, we provide a practical and forward-looking overview of the principal hardware error sources and the corresponding error suppression and mitigation methods for reducing their impact across the current NISQ-FTQC transition. We discuss hardware-aware circuit design, coherent-error suppression, readout mitigation, noise extrapolation, classical inference, and software-supported workflows, with particular emphasis on their implementation on actual quantum processors. We further examine how error mitigation techniques can be adapted to encoded and logical-qubit settings so that they can operate alongside quantum error correction to suppress residual logical errors and improve the accuracy of computation in the early fault-tolerant regime.