We developed a novel scheme for remote preparation of bright squeezed light using standard fiber-based components over field-deployed multi-core fibers. By implementing two phase-locked loops, we successfully generated bright amplitude-squeezed light over a 6 km laboratory single-mode fiber and a 17 km field-deployed multi-core fiber with measured squeezing levels of −2.52 dB and −1.80 dB, respectively. We also observed bright phase-squeezed light in the two scenarios with squeezing levels of −2.01 dB and −0.91 dB. We also measured results similar to those of the deployed fiber by using a 30 km laboratory single-mode fiber with comparable optical loss. The squeezed properties were confirmed with reconstructed Wigner functions using quantum state tomography. Our approach enabled remote users to access user-defined squeezed light based on a single seed laser, thereby maintaining coherence between their squeezed states, which could find applications in fiber-based quantum information processing and quantum metrology.
We developed a novel scheme for remote preparation of bright squeezed light using standard fiber-based components over field-deployed multi-core fibers. By implementing two phase-locked loops, we successfully generated bright amplitude-squeezed light over a 6 km laboratory single-mode fiber and a 17 km field-deployed multi-core fiber with measured squeezing levels of −2.52 dB and −1.80 dB, respectively. We also observed bright phase-squeezed light in the two scenarios with squeezing levels of −2.01 dB and −0.91 dB. We also measured results similar to those of the deployed fiber by using a 30 km laboratory single-mode fiber with comparable optical loss. The squeezed properties were confirmed with reconstructed Wigner functions using quantum state tomography. Our approach enabled remote users to access user-defined squeezed light based on a single seed laser, thereby maintaining coherence between their squeezed states, which could find applications in fiber-based quantum information processing and quantum metrology.
Squeezed states of light enable optical measurements with sensitivity beyond the shot noise limit of detection with classical light. Optical fibers represent a major potential platform for quantum squeezed sensing due to the extremely low loss and perfect single-spatial-mode operation. In this work, we demonstrate two-mode intensity squeezing directly within a commercially available optical fiber, based on a four-wave mixing process. The setup operates in a quasi-continuous-wave mode using 15 ns long pulses and relies on standard laser diode sources, telecommunication electro-optic modulators, and simple photo-detectors. The process is seeded by a coherent signal input, generating bright squeezed output states. Absolute noise reduction by 4 dB below the classical shot-noise limit is detected directly with no post-processing, for output signal and idler pulses of 2.4 × 10 6 photons in average. The results are applicable to quantum interferometry over fiber using simple, readily available components.
Squeezed light is a crucial resource for continuous-variable (CV) quantum information science. Distributed multi-mode squeezing is critical for enabling CV quantum networks and distributed quantum sensing. To date, multi-mode squeezing measured by homodyne detection has been limited to single-room experiments without coexisting classical signals, i.e., on "dark" fiber. Here, after distribution through separate fiber spools (5 km), -0.9 ± 0.1-dB coexistent two-mode squeezing is measured. Moreover, after distribution through separate deployed campus fibers (about 250 m and 1.2 km), -0.5 ± 0.1-dB coexistent two-mode squeezing is measured. Prior to distribution, the squeezed modes are each frequency multiplexed with several classical signals-including the local oscillator and conventional network signals-demonstrating that the squeezed modes do not need dedicated dark fiber. After distribution, joint two-mode squeezing is measured and recorded for post-processing using triggered homodyne detection in separate locations. This demonstration enables future applications in quantum networks and quantum sensing that rely on distributed multi-mode squeezing.
The squeezed states of light become more and more important in the fields of quantum enhanced precision measurement and quantum information. To get this vital continuous variable quantum resource, the generation of squeezed states of light becomes a key factor. In this paper, a compact telecom fiber-based bright squeezed light (BSL) generator is demonstrated. To our knowledge, this is the first time that BSL has been reported in a fiber-based system to date. To obtain the BSL, a double-pass parametric amplifier based on surface-coated lithium niobate waveguide is employed. When the 1550 nm seed laser of the parametric amplifier is blocked, a stable 1.85 dB squeezed vacuum is obtained. With injected seed power of 80 μW, an output power of 18 μW and a squeezing value of 1.04 dB are achieved of the BSL at 1550 nm. Due to the good mode matching in the fiber and the absence of the resonant cavity, this flexible and compact BSL generator has the potential to be useful in out-of-the-laboratory quantum technologies. Moreover, the BSL has a narrow spectral width of 30 kHz, which is inherited from a narrow-linewidth single-frequency seed laser. In addition to being free from the wavelength-dependent losses, the narrowband BSL is also beneficial to improve the signal-to-noise ratio of quantum-enhanced precision measurement.
Squeezed light plays a vital role in quantum information processing. However, its highly sensitive nature presents significant practical challenges, particularly in remote detection, which traditionally requires complex systems such as active phase locking, clock synchronization, and polarization control. Here, we propose and demonstrate an asynchronous detection method for squeezed light eliminating the need for these complex systems. By employing radio-frequency heterodyne detection with a locally generated local oscillator and applying a series of digital unitary transformations, we successfully reconstruct squeezed states of light. We validate our approach in two key applications: the distribution of squeezed light over a 10 km fiber channel, and passive continuous-variables quantum key distribution based on squeezed vacuum states between two labs connected via deployed fiber. This demonstrates a practical digital reconstruction method for squeezed light, opening new avenues for practical distributed quantum sensing networks and high-performance, long-distance quantum communication using squeezed states.
Transmission and accurate detection of squeezed states of light will play a central role in the future quantum internet, where quantum cryptography, communication and computation will coexist in an organic system. Their coherent detection has recently proven to be crucial for photonics-based quantum computing [1] , and to provide improvements in continuous variables quantum key distribution [2] [6] and quantum sensing [3] . Often when measuring a quantum state through coherent detection, the local oscillator field is transmitted along with the signal; however, in realistic long-distance optical fiber transmissions, where the needed local oscillator optical power increases exponentially with the distance, the system’s performance deteriorates due to nonlinear Brillouin scattering, and wavelength multiplexing schemes may be needed to avoid the issue. Moreover, transmitting a local oscillator opens security loopholes in quantum key distribution systems, where an eavesdropper can defy the security assessment from the trusted parties by gaining control over the local oscillator [4] . It is therefore very important to design coherent detection schemes that make use of independent local oscillators. We demonstrate the transmission single-mode squeezed light at 1550 nm wavelength through single-mode optical fibers (10 m and 10 km lengths) and its homodyne detection, using an independent local oscillator and a real-time phase-control system. Fig. 1a depicts the implemented physical setup: 1550 nm squeezed light is generated through spontaneous parametric downconversion [5] , couples into a single-mode optical fiber and propagates towards the homodyne detector for quadrature measurement. Real-time phase control consists in detecting the interference between a 40 MHz single-sideband pilot mode -phase-locked to the downconverted pump- and the local oscillator, estimating their instantaneous phase difference and implementing a fast and broad FPGA-based phase control on the local oscillator. As shown in Fig. 1b and 1c, with the presented scheme it was possible to steadily measure up to 3.6 dB of squeezing after a 10 m optical fiber transmission, and up to 1.5 dB of squeezing after a 10 km fiber transmission, with similar performance in terms of phase error and control stability. The presented system is simple, robust and cost-effective, and it will represent a standard class of techniques to detect not only squeezed states of light, but any arbitrary quantum state of light, including Schrödinger cat states, highly useful in quantum computation and error correction.