Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Lobachevskii Journal of Mathematics

Spatially Shaped Photons for Single-pixel Quantum Imaging

Сыч Денис Васильевич, Valentin Averchenko

Published Jun 1, 2024• 3 citations
Publisher

Abstract

Abstract Single-pixel imaging is a method for obtaining an image without multi-pixel sensors. In this method, an object of interest is illuminated by light that has specifically designed spatio-temporal shape, while a single-pixel detector measures the total amount of reflected or transmitted light. The key prerequisite of this method is the ability to create a given spatio-temporal light shape, which becomes especially challenging at the level of single photons. The current photon shaping procedures cannot be directly applied to single-pixel imaging due to the limited generation rate or the need for post-processing. In this work, we propose a highly efficient method for generating arbitrary single-photon shapes without post-selection. We exploit the heralded single-photon shaping approach, and study the effect of the modal properties of a single-photon detection on the characteristics of the heralded photon. We find that the use of multi-mode detection allows to increase the heralding probability of shaped photons proportionally to the number of detected modes while keeping the shape intact, which makes it highly desirable for single-pixel quantum imaging.

DOI
10.1134/s1995080224602820

Related papers

Heralded single-photon ghost imaging

Reuben S. Aspden, D. S. Tasca, Robert W. Boyd +1 more

Correlated-photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated-photon ghost-imaging experiments have scanned a single-pixel detector through the field of view to obtain the spatial information. However, scanning leads to a poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far-field of the photon pair source, taking advantage of the EPR-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing.

•Dec 20, 2012•1 citation

Heralded quantum imaging

Reuben S. Aspden

Imaging systems play a crucial role in shaping understanding of our surroundings. Modern imaging systems enable the acquisition of images of objects at length-scales and resolutions previously deemed impossible. However, as the drive for better images and novel applications increases, several questions fundamental to our understanding of imaging are being raised. We are familiar with images containing many millions of photons, but how many photons does it take to form an image? In scenarios requiring covert imaging, or where high-light levels damage the sample being imaged, is it possible to image a sample with a very small number of very low-energy photons? This thesis will focus on answering these two questions. In order to answer these questions I developed a heralded quantum imaging system. The strong spatial correlations inherent between down-converted twin photons have been utilised in many quantum imaging techniques for the past 25 years. Thus far, standard quantum imaging techniques have relied on scanning a fibre detector across the field of view in order to measure the spatial information in the image. However, the scanning mechanism fundamentally limits the detection efficiency of the imaging system. Recent years have seen an increased interest in using the latest camera technology within quantum imaging systems. The advent of single-photon-sensitive cameras has opened up new possibilities within the quantum imaging field. It is now possible to obtain images of objects by detecting very low-light illumination across the full scene simultaneously. In the heralded quantum imaging system presented in this thesis, a combination of quantum mechanics and a high-sensitivity camera was employed to obtain high contrast images containing very few photons. This was the first such system built. Using the correlations between the twin photons generated by our down-conversion source, and our development of compressive sampling techniques to post-process the acquired data enabled the acquisition of an image containing an average of only 0.5 photons per pixel. This represents a significant reduction when compared with a conventional image that contains of order 105 photons per pixel. I also developed this imaging system to use twin photons at vastly different wave- lengths. The object was probed with low-energy infrared photons whilst the image was developed on a camera using the correlated visible photon. This disparity in energy between the two photons enabled the acquisition of images using only several thousand photons, corresponding to an energy deposition on the sample of only a few pJ.

•Jan 1, 2015•3 citations

Noise-tolerant, single pixel imaging with a quantum heralding source

Steven D. Johnson, Alex R. McMillan, Cyril Torre +3 more

We present a method of using a high-flux entangled photon-pair source to improve the signal-to-noise ratio of a single-pixel imaging system. Sensing with single-photon counting detectors will often suffer from measurement noise due to any background light levels. Using a single detector enables a high efficiency of detection and when paired with a variable transmission mask enables full images to be captured. The heralding photon from the source acts as a temporal reference, allowing the signal photons to be distinguished from background noise. This heralding method is key to understanding how quantum measurements can produce higher contrast images than their classical equivalent.

Optical and Quantum Sensing and Precision Metrology II•Mar 9, 2022•0 citations

Single-pixel imaging with heralded single photons

Steven Johnson, Alex R. McMillan, Cyril Torre +3 more

Traditional remote sensing applications are often based on pulsed laser illumination with a narrow linewidth and characteristic repetition rate, which are not conducive to covert operation. Whatever methods are employed for covert sensing, a key requirement is for the probe light to be indistinguishable from background illumination. We present a method to perform single-pixel imaging that suppresses the effect of background light and hence improves the signal-to-noise ratio by using correlated photon-pairs produced via spontaneous parametric down conversion. One of the photons in the pair is used to illuminate the object whilst the other acts as a temporal reference, allowing the signal photons to be distinguished from background noise. Understanding the noise regime is key to producing higher contrast images using this heralding method.

Optics Continuum•Mar 22, 2022•16 citations

Quantum Ghost Imaging by Sparse Spatial Mode Reconstruction

Fazilah Nothlawala, Chané Moodley, Neelan Gounden +2 more

Abstract In a conventional quantum imaging experiment, the image of the object is retrieved directly with single photon camera technology, or computationally with a single‐pixel detector and pixelated projective masks. In all these approaches, the resolution of the image is dictated by the pixel resolution of the detection devices. In this paper, the traditional spatial basis of pixels is replaced with spatial modes, exploiting their unique features to enhance image fidelity and resolution and improve reconstruction accuracy through modal sparsity. This approach can be used even when the modes are not orthogonal, demonstrating the principle with highly efficient phase‐only approximations to the modal basis. By numerical simulation and experimental analysis, the advantages of this approach are illustrated, which include faster convergence to the object, with higher signals and fidelity, which are demonstrated with an order of magnitude less masks than conventional approaches for the same fidelity in outcome. Unlike the basis of pixels, the resolution of the image is not dictated by the resolution of the detectors, opening a path to high‐resolution quantum imaging of complex objects.

Advanced Quantum Technologies•Jan 6, 2025•7 citations

Quantum ghost imaging with a modal basis

Fazilah Nothlawala, Chané Moodley, Neelan Gounden +2 more

Quantum ghost imaging harnesses entangled photon pairs to form images using light that never directly interacts with the object. Conventional approaches rely on pixelated detectors or spatial masks, where the resolution is fundamentally limited by the pixel size and thus bounded by the Rayleigh criterion. In this work, we present a modal approach that replaces pixel-based detection with measurements in a basis of structured modes. By reconstructing images through tailored spatial modes, we decouple resolution from the physical limitations of detectors and instead tie it to the system’s optical precision and computational control. We demonstrate that even non-orthogonal modal sets can achieve high fidelity image reconstruction by exploiting modal sparsity, significantly reducing the number of required measurements. Using phase-only approximations of Hermite-Gaussian modes, we avoid the loss associated with complex amplitude modulation while retaining high reconstruction fidelity. The result is a high-resolution, high-efficiency quantum ghost imaging technique powered by structured light, opening new possibilities for photon-efficient imaging in low-light and quantum-limited regimes, such as biological microscopy and remote sensing.

Optical and Quantum Sensing and Precision Metrology II•Mar 5, 2026•0 citations
Abstract Single-pixel imaging is a method for obtaining an image without multi-pixel sensors. In this method, an object of interest is illuminated by light that has specifically designed spatio-temporal shape, while a single-pixel detector measures the total amount of reflected or transmitted light. The key prerequisite of this method is the ability to create a given spatio-temporal light shape, which becomes especially challenging at the level of single photons. The current photon shaping procedures cannot be directly applied to single-pixel imaging due to the limited generation rate or the need for post-processing. In this work, we propose a highly efficient method for generating arbitrary single-photon shapes without post-selection. We exploit the heralded single-photon shaping approach, and study the effect of the modal properties of a single-photon detection on the characteristics of the heralded photon. We find that the use of multi-mode detection allows to increase the heralding probability of shaped photons proportionally to the number of detected modes while keeping the shape intact, which makes it highly desirable for single-pixel quantum imaging.
Correlated-photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated-photon ghost-imaging experiments have scanned a single-pixel detector through the field of view to obtain the spatial information. However, scanning leads to a poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far-field of the photon pair source, taking advantage of the EPR-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing.
Imaging systems play a crucial role in shaping understanding of our surroundings. Modern imaging systems enable the acquisition of images of objects at length-scales and resolutions previously deemed impossible. However, as the drive for better images and novel applications increases, several questions fundamental to our understanding of imaging are being raised. We are familiar with images containing many millions of photons, but how many photons does it take to form an image? In scenarios requiring covert imaging, or where high-light levels damage the sample being imaged, is it possible to image a sample with a very small number of very low-energy photons? This thesis will focus on answering these two questions. In order to answer these questions I developed a heralded quantum imaging system. The strong spatial correlations inherent between down-converted twin photons have been utilised in many quantum imaging techniques for the past 25 years. Thus far, standard quantum imaging techniques have relied on scanning a fibre detector across the field of view in order to measure the spatial information in the image. However, the scanning mechanism fundamentally limits the detection efficiency of the imaging system. Recent years have seen an increased interest in using the latest camera technology within quantum imaging systems. The advent of single-photon-sensitive cameras has opened up new possibilities within the quantum imaging field. It is now possible to obtain images of objects by detecting very low-light illumination across the full scene simultaneously. In the heralded quantum imaging system presented in this thesis, a combination of quantum mechanics and a high-sensitivity camera was employed to obtain high contrast images containing very few photons. This was the first such system built. Using the correlations between the twin photons generated by our down-conversion source, and our development of compressive sampling techniques to post-process the acquired data enabled the acquisition of an image containing an average of only 0.5 photons per pixel. This represents a significant reduction when compared with a conventional image that contains of order 105 photons per pixel. I also developed this imaging system to use twin photons at vastly different wave- lengths. The object was probed with low-energy infrared photons whilst the image was developed on a camera using the correlated visible photon. This disparity in energy between the two photons enabled the acquisition of images using only several thousand photons, corresponding to an energy deposition on the sample of only a few pJ.
We present a method of using a high-flux entangled photon-pair source to improve the signal-to-noise ratio of a single-pixel imaging system. Sensing with single-photon counting detectors will often suffer from measurement noise due to any background light levels. Using a single detector enables a high efficiency of detection and when paired with a variable transmission mask enables full images to be captured. The heralding photon from the source acts as a temporal reference, allowing the signal photons to be distinguished from background noise. This heralding method is key to understanding how quantum measurements can produce higher contrast images than their classical equivalent.
Traditional remote sensing applications are often based on pulsed laser illumination with a narrow linewidth and characteristic repetition rate, which are not conducive to covert operation. Whatever methods are employed for covert sensing, a key requirement is for the probe light to be indistinguishable from background illumination. We present a method to perform single-pixel imaging that suppresses the effect of background light and hence improves the signal-to-noise ratio by using correlated photon-pairs produced via spontaneous parametric down conversion. One of the photons in the pair is used to illuminate the object whilst the other acts as a temporal reference, allowing the signal photons to be distinguished from background noise. Understanding the noise regime is key to producing higher contrast images using this heralding method.
Abstract In a conventional quantum imaging experiment, the image of the object is retrieved directly with single photon camera technology, or computationally with a single‐pixel detector and pixelated projective masks. In all these approaches, the resolution of the image is dictated by the pixel resolution of the detection devices. In this paper, the traditional spatial basis of pixels is replaced with spatial modes, exploiting their unique features to enhance image fidelity and resolution and improve reconstruction accuracy through modal sparsity. This approach can be used even when the modes are not orthogonal, demonstrating the principle with highly efficient phase‐only approximations to the modal basis. By numerical simulation and experimental analysis, the advantages of this approach are illustrated, which include faster convergence to the object, with higher signals and fidelity, which are demonstrated with an order of magnitude less masks than conventional approaches for the same fidelity in outcome. Unlike the basis of pixels, the resolution of the image is not dictated by the resolution of the detectors, opening a path to high‐resolution quantum imaging of complex objects.
Quantum ghost imaging harnesses entangled photon pairs to form images using light that never directly interacts with the object. Conventional approaches rely on pixelated detectors or spatial masks, where the resolution is fundamentally limited by the pixel size and thus bounded by the Rayleigh criterion. In this work, we present a modal approach that replaces pixel-based detection with measurements in a basis of structured modes. By reconstructing images through tailored spatial modes, we decouple resolution from the physical limitations of detectors and instead tie it to the system’s optical precision and computational control. We demonstrate that even non-orthogonal modal sets can achieve high fidelity image reconstruction by exploiting modal sparsity, significantly reducing the number of required measurements. Using phase-only approximations of Hermite-Gaussian modes, we avoid the loss associated with complex amplitude modulation while retaining high reconstruction fidelity. The result is a high-resolution, high-efficiency quantum ghost imaging technique powered by structured light, opening new possibilities for photon-efficient imaging in low-light and quantum-limited regimes, such as biological microscopy and remote sensing.