In November 2018, during the 26th General Conference on Weights and Measures (CGPM) in Versailles, France, a landmark resolution was adopted to redefine four base units of the International System of Units (SI)(https://www.bipm.org/en/committees/cg/cgpm/26-2018/resolution-1). The kilogram, mole, ampere, and kelvin were redefined in terms of fundamental physical constants: the Planck constant$(h)$, the Avogadro constant$(N_{\mathrm{A}})$, the elementary charge$(e)$, and the Boltzmann constant$(k)$, respectively. As illustrated in Figure 1(a), the new SI framework defines all seven base units based on fundamental constants, marking a complete transition of metrology into the quantum era. This system has been in effect globally since May 20, 2019, on World Metrology Day.
In November 2018, during the 26th General Conference on Weights and Measures (CGPM) in Versailles, France, a landmark resolution was adopted to redefine four base units of the International System of Units (SI)(https://www.bipm.org/en/committees/cg/cgpm/26-2018/resolution-1). The kilogram, mole, ampere, and kelvin were redefined in terms of fundamental physical constants: the Planck constant(h), the Avogadro constant(NA), the elementary charge(e), and the Boltzmann constant(k), respectively. As illustrated in Figure 1(a), the new SI framework defines all seven base units based on fundamental constants, marking a complete transition of metrology into the quantum era. This system has been in effect globally since May 20, 2019, on World Metrology Day.
The International System of Units (SI) is the world's most widely used system of measurement, used every day in commerce and science, and is the modern form of the metric system. It currently comprises the meter (m), the kilogram (kg), the second (s), the ampere (A), the kelvin (K), the candela (cd) and the mole (mol)). The system is changing though, units and unit definitions are modified through international agreements as the technology of measurement progresses, and as the precision of measurements improves. The SI is now being redefined based on constants of nature and their realization by quantum standards. Therefore, the underlying physics and technologies will receive increasing interest, and not only in the metrology community but in all fields of science. This book introduces and explains the applications of modern physics concepts to metrology, the science and the applications of measurements. A special focus is made on the use of quantum standards for the realization of the forthcoming new SI (the international system of units). The basic physical phenomena are introduced on a level which provides comprehensive information for the experienced reader but also provides a guide for a more intense study of these phenomena for students.
Advances in quantum mechanics have long underpinned metrology by enabling practical realizations of units through quantum effects. With the 2019 SI revision, traceability is anchored in defined fundamental constants, reinforcing the quantum-mechanical basis of modern standards. In parallel, quantum technologies are transitioning from laboratory science to engineering and early industrial deployment, bringing familiar pressures for integration, reliability, cost reduction, supply-chain formation, and standardization. The direction of benefit is thus reversing: metrology and precision measurement are becoming enabling infrastructure for the industrialization of quantum technologies. Against this backdrop, this paper surveys the metrology and precision-measurement capabilities required across representative quantum-computing modalities and identifies where electrical and related metrology can contribute to the development, characterization, and reliable operation of quantum hardware. We then discuss cross-cutting measurement needs and standardization opportunities that recur across platforms, and note how similar frameworks can extend to emerging quantum-sensing applications.
Emerging technologies demand innovations in metrology: • Agility – to keep pace with a rapidly changing technical landscape; • Ability – to develop novel, perhaps first-ever, measurement capabilities; • Comparability and interoperability – across vendors, in commercial timeframes; • Accelerated delivery – because formal standards may be obsolete by the time they’re published. The same quantum technologies that have revolutionized metrology, such as Josephson junctions that are used to create the world’s most accurate voltage standards and ion traps that are used in time and frequency standards, also underpin emerging new markets in quantum computing, networking and sensing – and these quantum-based products require entirely new approaches for measurement and characterization. The world’s metrology institutes have been at the forefront of the quantum revolution, being both early developers and adopters of quantum technologies for metrology, and are uniquely poised to spearhead the development of metrology for quantum – those measurements and related standards needed by industry to underpin quantum-based products. The metrology community is positioned to create trust in the emerging quantum economy due to its long history of objectivity, neutrality and international collaboration; anticipating industry’s needs to be ready with rigorous measurement capabilities as technologies evolve; and its having formed institutions such as the CIPM, BIPM and IMEKO to support collaborative efforts. The BIPM hosted a workshop in March 2024 which brought together 149 participants from 43 NMIs and designated institutes (DIs) from 39 economies, along with industry representatives, to discuss how best to leverage the expertise of the worlds national metrology institutes (NMIs) and their designated institutes (DIs) to accelerate the development and adoption of quantum technologies through measurements and standards. The workshop supported coordinated development and sharing of measurement “best practices” in support of future standardization, the mission of a new collaborative initiative referred to as NMI-Q. The NMI-Q organizing committee, comprised of representatives of the NMIs of Australia, Canada, Germany, Italy, Japan, the United Kingdom, and the United States, are working on a cooperation framework inspired by the successful VAMAS organization, which conducts coordinated pre-standardization work in material science. NMI-Q has initiated early work in quantum photonics, and expects to expand to a breadth of technical areas, such as measurement and characterization to support multiple quantum computing platforms, quantum networking models, and sensing modalities.