Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Engineering Science and Technology Review

Design and Simulation of a Millimeter and Submillimeter Detector Utilizing a High-Temperature Superconductor Josephson Junction

Zahra Ehsani, Mahboobeh Baghi Hedeshi, Seyed Mohammad Hassan Javadzadeh

Published Jan 1, 2024• 0 citations
Publisher

Abstract

Superconducting detectors play a crucial role in astronomy, particularly at millimeter and sub-millimeter wavelengths, due to their high sensitivity, ease of fabrication, and potential for integration into large arrays.Josephson junction detectors, which utilize high-temperature superconductors, offer a promising design option because they can operate at higher temperatures.In this paper, we aim to design and simulate two detectors based on high-temperature Josephson junctions for millimeter and sub-millimeter waves.To achieve this goal, we employed the Riblet directional coupler to develop detector arrays.We evaluated the frequency response, quality factor, and loss in these detectors.The experimental results indicate that constructing larger arrays and reducing the gap between the coupler and resonators can enhance the quality factor.We demonstrate this improvement by presenting the quality factors for two different gaps in each spectrum.

DOI
10.25103/jestr.174.15

Related papers

Superconducting detectors and mixers for millimeter and submillimeter astrophysics

Jonas Stasys Zmuidzinas, P. L. Richards

Superconducting detectors will play an increasingly significant role in astrophysics, especially at millimeter through far-IR wavelengths, where the scientific opportunities include key problems in astronomy and cosmology. Superconducting detectors offer many benefits: outstanding sensitivity, lithographic fabrication, and large array sizes, especially through the recent development of multiplexing techniques. This paper describes the scientific opportunities, the basic physics of these devices, the techniques for radiation coupling, and reviews the recent progress in direct detectors, such as transition-edge bolometers, and the work on tunnel junction (superconductor-insulator-superconductor) and hot-electron mixers.

Proceedings of the IEEE•Sep 20, 2004•301 citations

Superconducting millimeter wave oscillators and SIS mixers integrated on a chip

V. P. Koshelets, А. В. Щукин, S. V. Shitov +1 more

All-refractory material superconducting millimeter-wave oscillators have been designed and investigated experimentally with different superconductor-insulator-superconductor (SIS) mixers integrated on the same chip. Tested structures include a flux-flow oscillator (FFO) based on a long Josephson junction, a coupling section, and an SIS detector with tuned out junction capacitance. Coupling sections were designed as multistep microstrip quarter-wave impedance transformers. All junctions have been fabricated on the basis of a high-quality trilayer Nb-AlO/sub x/-Nb process. Microwave oscillations in the frequency range 75-500 GHz have been detected experimentally. The level of delivered power was estimated from the pumped I-V curve of the strongly coupled single junction detector. Coupled power levels higher than 0.1 mu W at 256 GHz were achieved. A spectral linewidth of the FFO of less than 1 MHz has been estimated experimentally. The first attempt to create an integrated receiver based on an FFO and an SIS array mixer integrated on the same chip was made in the 2-mm wavelength band.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•65 citations

Quasi-optical Josephson direct detectors for millimeter wave spectrum analysis

Michael A. Tarasov, G.V. Prokopenko, G. A. Ovsyannikov +5 more

A quasioptical Josephson detector with resistively shunted superconducting tunnel junctions of superconductor-insulator-superconductor (SIS) type and different integrated matching circuits for mm waveband region has been designed, fabricated and experimentally studied. A special quasioptical cryogenic probe has been designed and fabricated for measurements of microwave response of such integrated receiving structures. For low-frequency matching a cold transformer has been used at the output port. Many efforts have been made for reducing the external noise influence on Josephson junction IV curve. Quasioptical beamguide has been optimized and adjusted using Bi bolometers evaporated instead of Josephson junctions in the center of planar antenna. Beampatterns of several types of planar antennas, including self-complementary and non-complementary logarithmic spiral and log-periodic antennas, have been measured using the same technique.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 19, 1994•0 citations

Millimeter-wavelength radiation from arrays of discrete high-temperature superconductor Josephson junctions

Fangfang Song, M. Levitchev, Vadim A. Markelov +3 more

Josephson junction arrays could be competitive candidates for radiation sources in the frequency range from 0.5 to 1.5 THz. This is the range where compact solid-state continuous wave sources are most lacking. We investigated the millimeter-wave radiation from arrays of high-temperature superconductor bicrystal Josephson junctions embedded in a quasi-optical resonator. The novel approach of utilizing the intrinsic resonance modes of the substrate to improve the impedance coupling between the series array of discrete Josephson junctions and the quasi-optical resonator was investigated by experiments and electromagnetic field simulations. Radiation from the arrays containing up to 536 junctions was detected at about 80 GHz and liquid nitrogen temperature using a low-noise receiver. The detected maximum radiation power of the arrays was about 50 pW and the peak voltage agreed exactly with the Josephson current–voltage relation.

Superconductor Science and Technology•Feb 22, 2010•6 citations

SIS diodes for radio astronomy

Bertram M. Schwarzschild

As radioastronomers continue to push their observations to shorter wavelengths and fainter signals, their progress is impeded by a lack of sufficiently sensitive millimeter-wave receivers capable of operating at frequencies above 100 GHz. But now a spinoff from Josephson-junction fabrication technology appears to be coming to the rescue. New metallurgical and lithographic techniques developed for Josephson-effect computers are permitting the construction of superconducting diode junctions that promise to function as high-frequency photon detectors and heterodyne mixers near the theoretical limits of sensitivity.

Physics Today•Aug 1, 1980•1 citation

Superconducting Microwave Resonator Arrays for Submillimeter/Far-infrared Imaging

Omid Noroozian

Superconducting microwave resonators have the potential to revolutionize submillimeter and far-infrared astronomy, and with it our understanding of the universe. The field of low-temperature detector technology has reached a point where extremely sensitive devices like transition-edge sensors are now capable of detecting radiation limited by the background noise of the universe. However, the size of these detector arrays are limited to only a few thousand pixels. This is because of the cost and complexity of fabricating large-scale arrays of these detectors that can reach up to 10 lithographic levels on chip, and the complicated SQUID-based multiplexing circuitry and wiring for readout of each detector. In order to make substantial progress, next- generation ground-based telescopes such as CCAT or future space telescopes require focal planes with large-scale detector arrays of 104–106 pixels. Arrays using microwave kinetic inductance detectors (MKID) are a potential solution. These arrays can be easily made with a single layer of superconducting metal film deposited on a silicon substrate and pattered using conventional optical lithography. Furthermore, MKIDs are inherently multiplexable in the frequency domain, allowing ∼ 103 detectors to be read out using a single coaxial transmission line and cryogenic amplifier, drastically reducing cost and complexity. An MKID uses the change in the microwave surface impedance of a superconducting thin-film microresonator to detect photons. Absorption of photons in the superconductor breaks Cooper pairs into quasiparticles, changing the complex surface impedance, which results in a perturbation of resonator frequency and quality factor. For excitation and readout, the resonator is weakly coupled to a transmission line. The complex amplitude of a microwave probe signal tuned on-resonance and transmitted on the feedline past the resonator is perturbed as photons are absorbed in the superconductor. The perturbation can be detected using a cryogenic amplifier and subsequent homodyne mixing at room temperature. In an array of MKIDs, all the resonators are coupled to a shared feedline and are tuned to slightly different frequencies. They can be read out simultaneously using a comb of frequencies generated and measured using digital techniques. This thesis documents an effort to demonstrate the basic operation of ∼ 256 pixel arrays of lumped-element MKIDs made from superconducting TiNx on silicon. The resonators are designed and simulated for optimum operation. Various properties of the resonators and arrays are measured and compared to theoretical expectations. A particularly exciting observation is the extremely high quality factors (∼ 3 × 107) of our TiNx resonators which is essential for ultra-high sensitivity. The arrays are tightly packed both in space and in frequency which is desirable for larger full-size arrays. However, this can cause a serious problem in terms of microwave crosstalk between neighboring pixels. We show that by properly designing the resonator geometry, crosstalk can be eliminated; this is supported by our measurement results. We also tackle the problem of excess frequency noise in MKIDs. Intrinsic noise in the form of an excess resonance frequency jitter exists in planar superconducting resonators that are made on dielectric substrates. We conclusively show that this noise is due to fluctuations of the resonator capacitance. In turn, the capacitance fluctuations are thought to be driven by two-level system (TLS) fluctuators in a thin layer on the surface of the device. With a modified resonator design we demonstrate with measurements that this noise can be substantially reduced. An optimized version of this resonator was designed for the multiwavelength submillimeter kinetic inductance camera (MUSIC) instrument for the Caltech Submillimeter Observatory.

•Jun 12, 2012•14 citations
Superconducting detectors play a crucial role in astronomy, particularly at millimeter and sub-millimeter wavelengths, due to their high sensitivity, ease of fabrication, and potential for integration into large arrays.Josephson junction detectors, which utilize high-temperature superconductors, offer a promising design option because they can operate at higher temperatures.In this paper, we aim to design and simulate two detectors based on high-temperature Josephson junctions for millimeter and sub-millimeter waves.To achieve this goal, we employed the Riblet directional coupler to develop detector arrays.We evaluated the frequency response, quality factor, and loss in these detectors.The experimental results indicate that constructing larger arrays and reducing the gap between the coupler and resonators can enhance the quality factor.We demonstrate this improvement by presenting the quality factors for two different gaps in each spectrum.
Superconducting detectors will play an increasingly significant role in astrophysics, especially at millimeter through far-IR wavelengths, where the scientific opportunities include key problems in astronomy and cosmology. Superconducting detectors offer many benefits: outstanding sensitivity, lithographic fabrication, and large array sizes, especially through the recent development of multiplexing techniques. This paper describes the scientific opportunities, the basic physics of these devices, the techniques for radiation coupling, and reviews the recent progress in direct detectors, such as transition-edge bolometers, and the work on tunnel junction (superconductor-insulator-superconductor) and hot-electron mixers.
All-refractory material superconducting millimeter-wave oscillators have been designed and investigated experimentally with different superconductor-insulator-superconductor (SIS) mixers integrated on the same chip. Tested structures include a flux-flow oscillator (FFO) based on a long Josephson junction, a coupling section, and an SIS detector with tuned out junction capacitance. Coupling sections were designed as multistep microstrip quarter-wave impedance transformers. All junctions have been fabricated on the basis of a high-quality trilayer Nb-AlO/sub x/-Nb process. Microwave oscillations in the frequency range 75-500 GHz have been detected experimentally. The level of delivered power was estimated from the pumped I-V curve of the strongly coupled single junction detector. Coupled power levels higher than 0.1 mu W at 256 GHz were achieved. A spectral linewidth of the FFO of less than 1 MHz has been estimated experimentally. The first attempt to create an integrated receiver based on an FFO and an SIS array mixer integrated on the same chip was made in the 2-mm wavelength band.>
A quasioptical Josephson detector with resistively shunted superconducting tunnel junctions of superconductor-insulator-superconductor (SIS) type and different integrated matching circuits for mm waveband region has been designed, fabricated and experimentally studied. A special quasioptical cryogenic probe has been designed and fabricated for measurements of microwave response of such integrated receiving structures. For low-frequency matching a cold transformer has been used at the output port. Many efforts have been made for reducing the external noise influence on Josephson junction IV curve. Quasioptical beamguide has been optimized and adjusted using Bi bolometers evaporated instead of Josephson junctions in the center of planar antenna. Beampatterns of several types of planar antennas, including self-complementary and non-complementary logarithmic spiral and log-periodic antennas, have been measured using the same technique.
Josephson junction arrays could be competitive candidates for radiation sources in the frequency range from 0.5 to 1.5 THz. This is the range where compact solid-state continuous wave sources are most lacking. We investigated the millimeter-wave radiation from arrays of high-temperature superconductor bicrystal Josephson junctions embedded in a quasi-optical resonator. The novel approach of utilizing the intrinsic resonance modes of the substrate to improve the impedance coupling between the series array of discrete Josephson junctions and the quasi-optical resonator was investigated by experiments and electromagnetic field simulations. Radiation from the arrays containing up to 536 junctions was detected at about 80 GHz and liquid nitrogen temperature using a low-noise receiver. The detected maximum radiation power of the arrays was about 50 pW and the peak voltage agreed exactly with the Josephson current–voltage relation.
As radioastronomers continue to push their observations to shorter wavelengths and fainter signals, their progress is impeded by a lack of sufficiently sensitive millimeter-wave receivers capable of operating at frequencies above 100 GHz. But now a spinoff from Josephson-junction fabrication technology appears to be coming to the rescue. New metallurgical and lithographic techniques developed for Josephson-effect computers are permitting the construction of superconducting diode junctions that promise to function as high-frequency photon detectors and heterodyne mixers near the theoretical limits of sensitivity.
Superconducting microwave resonators have the potential to revolutionize submillimeter and far-infrared astronomy, and with it our understanding of the universe. The field of low-temperature detector technology has reached a point where extremely sensitive devices like transition-edge sensors are now capable of detecting radiation limited by the background noise of the universe. However, the size of these detector arrays are limited to only a few thousand pixels. This is because of the cost and complexity of fabricating large-scale arrays of these detectors that can reach up to 10 lithographic levels on chip, and the complicated SQUID-based multiplexing circuitry and wiring for readout of each detector. In order to make substantial progress, next- generation ground-based telescopes such as CCAT or future space telescopes require focal planes with large-scale detector arrays of 104–106 pixels. Arrays using microwave kinetic inductance detectors (MKID) are a potential solution. These arrays can be easily made with a single layer of superconducting metal film deposited on a silicon substrate and pattered using conventional optical lithography. Furthermore, MKIDs are inherently multiplexable in the frequency domain, allowing ∼ 103 detectors to be read out using a single coaxial transmission line and cryogenic amplifier, drastically reducing cost and complexity. An MKID uses the change in the microwave surface impedance of a superconducting thin-film microresonator to detect photons. Absorption of photons in the superconductor breaks Cooper pairs into quasiparticles, changing the complex surface impedance, which results in a perturbation of resonator frequency and quality factor. For excitation and readout, the resonator is weakly coupled to a transmission line. The complex amplitude of a microwave probe signal tuned on-resonance and transmitted on the feedline past the resonator is perturbed as photons are absorbed in the superconductor. The perturbation can be detected using a cryogenic amplifier and subsequent homodyne mixing at room temperature. In an array of MKIDs, all the resonators are coupled to a shared feedline and are tuned to slightly different frequencies. They can be read out simultaneously using a comb of frequencies generated and measured using digital techniques. This thesis documents an effort to demonstrate the basic operation of ∼ 256 pixel arrays of lumped-element MKIDs made from superconducting TiNx on silicon. The resonators are designed and simulated for optimum operation. Various properties of the resonators and arrays are measured and compared to theoretical expectations. A particularly exciting observation is the extremely high quality factors (∼ 3 × 107) of our TiNx resonators which is essential for ultra-high sensitivity. The arrays are tightly packed both in space and in frequency which is desirable for larger full-size arrays. However, this can cause a serious problem in terms of microwave crosstalk between neighboring pixels. We show that by properly designing the resonator geometry, crosstalk can be eliminated; this is supported by our measurement results. We also tackle the problem of excess frequency noise in MKIDs. Intrinsic noise in the form of an excess resonance frequency jitter exists in planar superconducting resonators that are made on dielectric substrates. We conclusively show that this noise is due to fluctuations of the resonator capacitance. In turn, the capacitance fluctuations are thought to be driven by two-level system (TLS) fluctuators in a thin layer on the surface of the device. With a modified resonator design we demonstrate with measurements that this noise can be substantially reduced. An optimized version of this resonator was designed for the multiwavelength submillimeter kinetic inductance camera (MUSIC) instrument for the Caltech Submillimeter Observatory.