We propose a novel scheme for efficient and low-noise microwave-to-optical quantum transduction based on cavity-enhanced Brillouin interaction between telecom photons and 10 gigahertz phonons on a lithium niobate-on-Sapphire chip. By employing a dual-microring cavity design and tailoring the geometry dispersion, triply-resonant and phase-matching conditions can be achieved for the backward Brillouin process, resulting in strong vacuum coupling strengths between the confined phononic and photonic modes. Our numerical analysis, taking into account the material anisotropy of lithium niobate and sapphire, predicts near-unity internal conversion efficiency with only sub-milliwatt pump power. The unsuspended all-solid-state architecture offers superior mechanical stability and robustness, overcoming a major challenge in piezo-optomechanical systems. Furthermore, the broadband nature of the Brillouin process enables multi-channel conversion, a key advantage over existing approaches. This versatile platform opens up exciting opportunities for scalable quantum processors with hybrid photonic-phononic-superconducting integrated circuits.
We propose a novel scheme for efficient and low-noise microwave-to-optical quantum transduction based on cavity-enhanced Brillouin interaction between telecom photons and 10 gigahertz phonons on a lithium niobate-on-Sapphire chip. By employing a dual-microring cavity design and tailoring the geometry dispersion, triply-resonant and phase-matching conditions can be achieved for the backward Brillouin process, resulting in strong vacuum coupling strengths between the confined phononic and photonic modes. Our numerical analysis, taking into account the material anisotropy of lithium niobate and sapphire, predicts near-unity internal conversion efficiency with only sub-milliwatt pump power. The unsuspended all-solid-state architecture offers superior mechanical stability and robustness, overcoming a major challenge in piezo-optomechanical systems. Furthermore, the broadband nature of the Brillouin process enables multi-channel conversion, a key advantage over existing approaches. This versatile platform opens up exciting opportunities for scalable quantum processors with hybrid photonic-phononic-superconducting integrated circuits.
A scalable hybrid cavity quantum acoustodynamics (QAD) platform is proposed. The architecture integrates superconducting transmon qubits with phononic integrated circuits on a single chip made by a lithium niobate-on-sapphire substrate. The platform supports tightly confined and guided phononic modes in unsuspended waveguides and microring structures, while the superconducting qubits reside on the sapphire substrate. Efficient piezoelectric coupling between the phononic modes and transmon qubits can be achieved using interdigital transducers as part of the qubit’s shunt capacitance. Numerical calculations demonstrate the feasibility of achieving strong coupling between the phononic microring resonator and the transmon qubit. Remarkably, we show that a single pair of interdigital transducer fingers is sufficient to yield a coupling strength of g/2π≈1.3 MHz for the quasi-Love mode. This hybrid cavity QAD platform opens up new opportunities for quantum information processing and the study of novel quantum acoustic phenomena.
We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.
Quantum transduction between microwave and optical photons offers the potential to merge the long-range connectivity of optical photons with the deterministic quantum operations of superconducting microwave qubits. A promising approach to achieving this uses an intermediary mechanical mode along with piezo-optomechanical interactions. Traditionally, these transducers are suspended to confine mechanical fields, but this complicates manufacturing and comes with the major challenge of poor thermal anchoring and a trade-off between noise and efficiency. To overcome these issues, we introduce the—to our knowledge—first design of a release-free electro-optomechanical quantum transducer. Our release-free, i.e., non-suspended, design leverages a silicon-on-sapphire platform. It combines release-free lithium niobate electromechanical crystals with silicon optomechanical crystals on a sapphire substrate, optimizing thermal anchoring and microwave and mechanical coherence. Despite departing from the traditional suspended transducer paradigm, our release-free design achieves coupling rates sufficient for quantum-level interactions between microwave photons, phonons, and optical photons. Unconventionally, it utilizes high-wavevector mechanical modes tightly confined to the chip surface. Beyond quantum science and engineering, this platform and its design principles could also propel low-power acousto-optic systems in integrated photonics.
We present a numerical study of the design of a microwave-to-optical quantum converter based on Brillouin backscattering in a single thin-film lithium niobate racetrack resonator. The conversion involves TE0 to TM0 polarization conversion mediated by an even-parity acoustic mode that can be excited by a conventional symmetric interdigital transducer. Co-localization of the optical and acoustic fields within a single resonator enhances their interaction, while the signal is separated from the strong optical pump by propagation direction, polarization, and frequency. Combining full-vector electromagnetic and acoustic calculations with a pulsed entanglement transfer protocol, we obtain a vacuum coupling of g0/2π = 2 kHz for the designed perimeter and show that cooperativity of C = 1 is achieved with a calculated on-chip pump power of approximately 2.94 μW for Qopt = 107 and Qac = 105. Under these assumptions, the protocol enables entanglement transfer from a superconducting qubit to a flying telecom photon, supporting the proposed architecture as a compact platform for integrated quantum transduction.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.