Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Large power dynamic range microwave electric field sensing in a vapor cell

Meiyu Ma, Sandan Wang, Yang Yan, Jinpeng Yuan, Linjie Zhang, Lirong Wang, Liantuan Xiao, Suotang Jia

Published Sep 2, 2024• 3 citations
Publisher

Abstract

Sensing of the microwave (MW) electric field with high accuracy and large power dynamic range has assisted in the implementation of metrology and communication. Here, an atom−based MW sensing system with a large linear power dynamic range for an electric field in the C band of 6.835 GHz is demonstrated in a vapor cell. The Rydberg electromagnetically induced transparency (EIT) spectra involving 53 D 5/2 state are employed to measure the medium intensity electric field by AC stark effect. On this basis, the heterodyne method, adding an auxiliary local oscillator (LO) MW field as a gain, is employed to measure the weak electric field. Finally, the strong electric field sensing is achieved by the atomic Rabi resonance when the coupling laser is turned off. As a result, the MW electric field measurements with a large linear power dynamic range of 101.6 dB are reached in a vapor cell by using multi−cooperative measurement methods. This work provides an effective approach for realizing the quantum MW sensing with high sensitivity and large power dynamic range.

DOI
10.1364/oe.537843

Related papers

Microwave Electrometry with Rydberg Eletromagnetically Induced Transparency in Vapor Cells

Haoquan Fan

An atom-based approach is presented to detect absolute microwave (MW) electric fields (E-fields). The approach uses Rydberg atoms in vapor cells at room temperature. The MW E-field measurements utilize a bright resonance prepared within an electromagnetically induced transparency (EIT) window. The large transition dipole moments between energetically adjacent Rydberg states enable this method to make traceable E-field measurements with a sensitivity that is several orders of magnitude higher than the current standard for MW E-field measurements. The method can be used to image MW E-field in the near field regime with a subwavelength resolution of $\\mathrm{\\lambda_{MW}/650}$, where $\\mathrm{\\lambda_{MW}}$ is the wavelength of the MW E-field. A high accuracy of $\\mathrm{1\\%}$ has been reached by minimizing the effects of the vapor cell geometry on the measured MW E-field. The dissertation also presents an alternative technique to perform the MW E-field measurement using dispersive properties of the EIT spectrum with a prism vapor cell. Recently, we applied a homodyne detection technique with a Mach Zehnder interferometer to achieve a new sensitivity limit for the MW E-field measurement, $\\mathrm{\\sim3~\\mu Vcm^{-1}Hz^{-1/2}}$. The new sensitivity is one order of magnitude better than our prior best sensitivity presented in Ref. [Nat. Phys. 8, 819 (2012)]. The Rydberg atom-based method is promising to be a new standard for MW E-field measurements and to develop into portable devices in the field of MW technologies.

•Jul 20, 2016•0 citations

Multi-parameter microwave quantum sensing with a single atomic probe

Zhigang Feng, Xiaochi Liu, Zhenfei Song +1 more

We demonstrate a multi-parameter sensing scheme for free space microwave electric and magnetic fields in single vapor cell based on the atom-based microwave detection techniques. A weak probe laser though a rubidium vapor cell first acts as magnetic probe to measure the microwave magnetic field via atomic Rabi resonance of the ground state hyperfine transition. When another strong coupling laser is subsequently counter-propagated and overlapped with the probe laser in the same atomic vapor cell, the probe laser is then used as electric probe to measure microwave electric field by off-resonant microwave dressed Rydberg Autler-Townes splitting. We achieve measurement of microwave electric and magnetic fields without any complicated tuning methods at the clock frequency of 6.835 GHz. Based on the inherent relationship between microwave electric and magnetic fields, and their good linear response characteristics in respective suitable power ranges, the equivalent microwave magnetic fields are derived from linear fitting of the measured electric fields, which are in agreement with the calibrated experimental results within the same power range. This work provides an effective approach for extending the power dynamic range of atom-based microwave quantum sensors.

Scientific Reports•Feb 13, 2025•7 citations

Continuous broadband microwave electric field measurement in Rydberg atoms based on the DC Stark effect

Kang Ouyang, Yuansheng Shi, Mingwei Lei +1 more

We demonstrate a method for broadband tunable continuous frequency electric field measurement based on the DC Stark effect in Rydberg atoms. In our experiment, we place a pair of parallel electrode plates inside the atomic vapor cell, utilizing the DC Stark effect to induce splitting and shifting of the Rydberg energy levels, thereby altering the resonance frequency of the Stark subpeaks. By employing the 52D5/2 Rydberg state, we achieve electric field measurements in the frequency range of 5.083–14.470 GHz. At an EDC of 3.45 V/cm and a resonant microwave frequency of 14.470 GHz, using heterodyne technology, the microwave electric field sensitivity is 538.89 μV/cm/√Hz, with a linear dynamic range of 23 dB. In comparison, a Rydberg heterodyne receiver with an EDC of 0 V/cm and a resonant microwave frequency of 5.083 GHz has a sensitivity of 5.43 μV/cm/√Hz and a linear dynamic range of 51 dB. This work will promote the study of atomic microwave receivers in continuous microwave frequency measurement.

Applied Physics Letters•Dec 25, 2023•27 citations

A Cs Rydberg Atomic Microwave Oscillator for Electric Field Sensing

He Wang, David Rosser, Michael J. Mazon +1 more

In this paper, we report an atomic oscillator in Ku band and its application for electric field (E-field) sensing with Cs Rydberg atoms in a room-temperature vapor cell. The oscillator is associated with the Cs Rydberg transition of 362D5/2– 372P3/2at 16.316 GHz which is generated with a two-laser double-resonance excitation. We characterized the energetics and the dipole moment of the Rydberg transition and used Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) effects for detecting continuous and amplitude/frequency modulated microwave E-fields. To enhance the oscillator’s response to weak signals, a superheterodyne technique was incorporated into the Rydberg oscillator system, which resulted in an improvement in the oscillator’s sensitivity by 100 times. Furthermore, our modeling shows that the Cs Rydberg atomic oscillator can be tuned to broad frequency ranges from MHz to THz for various RF applications.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•1 citation

Atom-based sensing technique of microwave electric and magnetic fields via a single rubidium vapor cell

Zhigang Feng, Xiaochi Liu, Yingyun Zhang +3 more

We present an atom-based approach for determining microwave electric and magnetic fields by using a single rubidium vapor cell in a microwave waveguide. For a 87Rb cascade three-level system employed in our experiment, a weak probe laser driving the lower transition, 5S1/2→5P3/2, is first used to measure the microwave magnetic field based on the atomic Rabi resonance. When a counter-propagating strong coupling laser is subsequently turned on to drive the Rydberg transition, 5P3/2→67D5/2, the same probe laser is then used as a Rydberg electromagnetically induced transparency (EIT) probe to measure the microwave electric field by investigating the resonant microwave dressed Autler-Townes splitting (ATS). By tuning the hyperfine transition frequency of the ground state using an experimentally feasible static magnetic field, we first achieved a measurement of the microwave electric and magnetic field strength at the same microwave frequency of 6.916 GHz. Based on the ideal relationship between the electric and magnetic field components, we obtained the equivalent microwave magnetic fields by fitting the inversion to the measured microwave electric fields, which demonstrated that the results were in agreement with the experimental measurement of the microwave magnetic fields in the same microwave power range. This study provides new experimental evidence for quantum-based microwave measurements of electric and magnetic fields by a single sensor in the same system.

Optics Express•Dec 23, 2022•9 citations

High-dynamic-range microwave sensing using atomic Rabi resonances

Dong Hou, Chao Li, Fuyu Sun +6 more

Detection of the microwave (MW) field with high accuracy is very important in the physical science and engineering fields. Herein, an atomic Rabi resonance-based MW magnetic field sensor with a high-dynamic-range is reported, where α and β Rabi resonances are used to measure MW fields. In MW measurement experiments, the sensor successfully measured a magnetic field of about 10 nT at 9.2 GHz using the α Rabi resonance line on the cesium clock transition and continuously detected the MW magnetic field in the X-band over a high dynamic power range of >60 dB from the β Rabi resonance. Finally, the MW power frequency shift and power broadening are investigated to support more sensitive field measurements. The proposed MW detection method can be extended to cover a higher dynamic range and a wider frequency band by applying stronger excitations and exploring non-clock atomic transitions, respectively. In addition to MW magnetic field sensing, other potential application of the proposed method can be explored, including SI-traceable MW calibration and atomic communication.

Review of Scientific Instruments•Feb 1, 2023•4 citations
Sensing of the microwave (MW) electric field with high accuracy and large power dynamic range has assisted in the implementation of metrology and communication. Here, an atom−based MW sensing system with a large linear power dynamic range for an electric field in the C band of 6.835 GHz is demonstrated in a vapor cell. The Rydberg electromagnetically induced transparency (EIT) spectra involving 53 D 5/2 state are employed to measure the medium intensity electric field by AC stark effect. On this basis, the heterodyne method, adding an auxiliary local oscillator (LO) MW field as a gain, is employed to measure the weak electric field. Finally, the strong electric field sensing is achieved by the atomic Rabi resonance when the coupling laser is turned off. As a result, the MW electric field measurements with a large linear power dynamic range of 101.6 dB are reached in a vapor cell by using multi−cooperative measurement methods. This work provides an effective approach for realizing the quantum MW sensing with high sensitivity and large power dynamic range.
An atom-based approach is presented to detect absolute microwave (MW) electric fields (E-fields). The approach uses Rydberg atoms in vapor cells at room temperature. The MW E-field measurements utilize a bright resonance prepared within an electromagnetically induced transparency (EIT) window. The large transition dipole moments between energetically adjacent Rydberg states enable this method to make traceable E-field measurements with a sensitivity that is several orders of magnitude higher than the current standard for MW E-field measurements. The method can be used to image MW E-field in the near field regime with a subwavelength resolution of mathrmlambdaMW/650\\mathrm{\\lambda_{MW}/650}mathrmlambdaMW​/650, where mathrmlambdaMW\\mathrm{\\lambda_{MW}}mathrmlambdaMW​ is the wavelength of the MW E-field. A high accuracy of $\\mathrm{1\\%}$ has been reached by minimizing the effects of the vapor cell geometry on the measured MW E-field. The dissertation also presents an alternative technique to perform the MW E-field measurement using dispersive properties of the EIT spectrum with a prism vapor cell. Recently, we applied a homodyne detection technique with a Mach Zehnder interferometer to achieve a new sensitivity limit for the MW E-field measurement, mathrmsim3 muVcm−1Hz−1/2\\mathrm{\\sim3~\\mu Vcm^{-1}Hz^{-1/2}}mathrmsim3 muVcm−1Hz−1/2. The new sensitivity is one order of magnitude better than our prior best sensitivity presented in Ref. [Nat. Phys. 8, 819 (2012)]. The Rydberg atom-based method is promising to be a new standard for MW E-field measurements and to develop into portable devices in the field of MW technologies.
We demonstrate a multi-parameter sensing scheme for free space microwave electric and magnetic fields in single vapor cell based on the atom-based microwave detection techniques. A weak probe laser though a rubidium vapor cell first acts as magnetic probe to measure the microwave magnetic field via atomic Rabi resonance of the ground state hyperfine transition. When another strong coupling laser is subsequently counter-propagated and overlapped with the probe laser in the same atomic vapor cell, the probe laser is then used as electric probe to measure microwave electric field by off-resonant microwave dressed Rydberg Autler-Townes splitting. We achieve measurement of microwave electric and magnetic fields without any complicated tuning methods at the clock frequency of 6.835 GHz. Based on the inherent relationship between microwave electric and magnetic fields, and their good linear response characteristics in respective suitable power ranges, the equivalent microwave magnetic fields are derived from linear fitting of the measured electric fields, which are in agreement with the calibrated experimental results within the same power range. This work provides an effective approach for extending the power dynamic range of atom-based microwave quantum sensors.
We demonstrate a method for broadband tunable continuous frequency electric field measurement based on the DC Stark effect in Rydberg atoms. In our experiment, we place a pair of parallel electrode plates inside the atomic vapor cell, utilizing the DC Stark effect to induce splitting and shifting of the Rydberg energy levels, thereby altering the resonance frequency of the Stark subpeaks. By employing the 52D5/2 Rydberg state, we achieve electric field measurements in the frequency range of 5.083–14.470 GHz. At an EDC of 3.45 V/cm and a resonant microwave frequency of 14.470 GHz, using heterodyne technology, the microwave electric field sensitivity is 538.89 μV/cm/√Hz, with a linear dynamic range of 23 dB. In comparison, a Rydberg heterodyne receiver with an EDC of 0 V/cm and a resonant microwave frequency of 5.083 GHz has a sensitivity of 5.43 μV/cm/√Hz and a linear dynamic range of 51 dB. This work will promote the study of atomic microwave receivers in continuous microwave frequency measurement.
In this paper, we report an atomic oscillator in Ku band and its application for electric field (E-field) sensing with Cs Rydberg atoms in a room-temperature vapor cell. The oscillator is associated with the Cs Rydberg transition of 362D5/2– 372P3/2at 16.316 GHz which is generated with a two-laser double-resonance excitation. We characterized the energetics and the dipole moment of the Rydberg transition and used Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) effects for detecting continuous and amplitude/frequency modulated microwave E-fields. To enhance the oscillator’s response to weak signals, a superheterodyne technique was incorporated into the Rydberg oscillator system, which resulted in an improvement in the oscillator’s sensitivity by 100 times. Furthermore, our modeling shows that the Cs Rydberg atomic oscillator can be tuned to broad frequency ranges from MHz to THz for various RF applications.
We present an atom-based approach for determining microwave electric and magnetic fields by using a single rubidium vapor cell in a microwave waveguide. For a 87Rb cascade three-level system employed in our experiment, a weak probe laser driving the lower transition, 5S1/2→5P3/2, is first used to measure the microwave magnetic field based on the atomic Rabi resonance. When a counter-propagating strong coupling laser is subsequently turned on to drive the Rydberg transition, 5P3/2→67D5/2, the same probe laser is then used as a Rydberg electromagnetically induced transparency (EIT) probe to measure the microwave electric field by investigating the resonant microwave dressed Autler-Townes splitting (ATS). By tuning the hyperfine transition frequency of the ground state using an experimentally feasible static magnetic field, we first achieved a measurement of the microwave electric and magnetic field strength at the same microwave frequency of 6.916 GHz. Based on the ideal relationship between the electric and magnetic field components, we obtained the equivalent microwave magnetic fields by fitting the inversion to the measured microwave electric fields, which demonstrated that the results were in agreement with the experimental measurement of the microwave magnetic fields in the same microwave power range. This study provides new experimental evidence for quantum-based microwave measurements of electric and magnetic fields by a single sensor in the same system.
Detection of the microwave (MW) field with high accuracy is very important in the physical science and engineering fields. Herein, an atomic Rabi resonance-based MW magnetic field sensor with a high-dynamic-range is reported, where α and β Rabi resonances are used to measure MW fields. In MW measurement experiments, the sensor successfully measured a magnetic field of about 10 nT at 9.2 GHz using the α Rabi resonance line on the cesium clock transition and continuously detected the MW magnetic field in the X-band over a high dynamic power range of >60 dB from the β Rabi resonance. Finally, the MW power frequency shift and power broadening are investigated to support more sensitive field measurements. The proposed MW detection method can be extended to cover a higher dynamic range and a wider frequency band by applying stronger excitations and exploring non-clock atomic transitions, respectively. In addition to MW magnetic field sensing, other potential application of the proposed method can be explored, including SI-traceable MW calibration and atomic communication.