Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Progress on the Opto-Electronic Bias for Pulse-Driven Josephson Voltage Standards at PTB

Marco Kraus, Oliver Kieler, Ralf Behr, L. Palafox

Published Jul 8, 2024• 1 citation
Publisher

Abstract

After demonstrating bipolar waveforms in 2020, PTB’s optical pulse transmission drive has been expanded for two independent Josephson junction arrays. Passive optical power splitters divide the two independent optical channels at room temperature. Balanced photodiodes modules in liquid helium then generate ternary electrical pulses to drive the nearby Josephson junction arrays via coplanar waveguides less than 10 mm long. The outputs of the Josephson junction arrays are connected in series and we successfully synthesized bipolar sinewaves at 1 kHz and 35 mV rms amplitude with higher harmonics suppressed by more than 96 dBc.

DOI
10.1109/cpem61406.2024.10646125

Related papers

Parallelization of the optical pulse-drive for AC Josephson voltage standards

Marco Kraus, Oliver Kieler, Ralf Behr +1 more

Abstract We have successfully operated two Josephson junction arrays in parallel with photonically generated current pulses to achieve higher output voltages with our optical pulse drive setup. Passive optical power splitters divide each optical channel at room temperature in order to illuminate multiple cryogenic photodiodes at 4 K , located near the arrays. The balanced photodiode configurations bias the Josephson junctions with ternary current pulses to generate a 1 kHz bipolar sinusoidal voltage with a nominal root mean square amplitude of 85 mV . We determined a spurious free dynamic range and total harmonic distortion of 110.6 dBc and − 105.0 dB from the spectrum of the synthesized signal. Applying an additional dither current to each array individually yielded a quantum locking range of 0.4 mA and 0.6 mA . Furthermore, the quantum locked operation was confirmed to remain stable when the optical output power of the laser diodes and the DC bias of the Mach–Zehnder modulators were varied. A stability measurement of the output amplitude over more than half an hour confirmed sufficiently wide operating margins, further demonstrating a reliable optical Josephson arbitrary waveform synthesizer setup suitable for generating quantum-based waveform with high spectral purity traceable to fundamental constants. To our knowledge, this is the highest amplitude generated with optically driven Josephson junctions so far and the first successful proof of principle for parallelizing the optical pulse drive to achieve higher output voltages in the future.

Measurement Science and Technology•Aug 18, 2025•3 citations

Progress on PTB’s Parallel Optical Pulse-Drive for AC Josephson Voltage Standards

Timo Glebe-Märklin, Marco Kraus, Oliver Kieler +2 more

This paper presents the latest progress on PTB’s parallel optical pulse-drive for AC Josephson voltage standards. Joint operation of multiple Josephson junction arrays with pulses transmitted via parallel optical channels is demonstrated using two series-connected arrays driven by a four-channel parallel optical pulse-drive. A 1 kHz bipolar sine wave with an 85 mV root mean square amplitude is synthesized, with harmonics suppressed by more than 110 dBc and a quantum locking range of 0.4 mA. Further, an expanded setup is introduced in which eight series-connected Josephson junction arrays are driven by a 16-channel parallel optical pulse-drive to synthesize bipolar signals with root mean square amplitudes of 1 V.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations

Realization of an Opto-Electronic Bias for Pulse-Driven Josephson Voltage Standards at PTB

Jonas Herick, L. Palafox, Eivind Bardalen +5 more

Pulse-driven Josephson voltage standards are used to generate quantum-based, spectrally pure AC voltage signals. The current pulses that drive the Josephson arrays can be transmitted optically and recent progress has demonstrated the operation of fast photodiodes at 4 K. In order to generate bipolar waveforms, two photodiodes are required to generate positive and negative pulses close to the Josephson array. We describe our optoelectronic setup and will present first results on a ternary pulse drive at the conference.

Conference on Precision Electromagnetic Measurements•Aug 1, 2020•7 citations

PTB's status of AC voltage metrolgy by microwave- and pulsetrain-driven josephson junction arrays

J. Niemeyer, Oliver Kieler, F. Muller +6 more

The report describes the most recent PTB developments and applications of large Josephson arrays for the generation of very precise sine waves and arbitrary waveforms. By means of large70 GHz sine-wave-driven binary arrays, AC voltages with frequencies up to 1 kHz and amplitudes of more than 10 V were generated with an uncertainty of better than 1μV/V. For the fabrication of this array type with up to 70000 junctions in series connection, an SNS junction technology with NbxSix-1barriers is now completely installed and permanently in use. With pulse-driven arrays of Josephson junctions, arbitrary waveforms were generated with a level of higher harmonics smaller than -120 dBc for frequencies from 150 Hz to 100 kHz at rms voltages less than 100 mV. These results were achieved with extended arrays of up to 4795 very small SNS junctions with Hf0.5Ti0.5barriers. Also the NbSi-technology technology has successfully been applied for the fabrication of pulse-driven Josephson arrays. As it seems to be difficult to considerably increase the wave amplitude by enhancing the junction number of the arrays, experiments were performed to combine a binary array system with a pulse-driven system with the goal to make use of the high amplitude of stepwise generated waves without losing the low noise and precision of quantum based rf waveforms generated by pulse trains at a clock frequency of 15 GHz.

International Kharkiv Symposium on Physics and Engineering of Microwaves, Millimeter and Submillimeter Waves•Jun 1, 2013•0 citations

Investigation of Broadband Wilkinson Power Dividers for Pulse-Driven Josephson Voltage Standards

Hao Tian, Oliver Kieler, Ralf Behr +3 more

This paper describes recent developments for increasing the output voltage of the Josephson Arbitrary Waveform Synthesizer (JAWS) at PTB. For this purpose, we developed modified broadband Wilkinson power dividers, which enable the operation of two or four Josephson junction series arrays per RF channel of the pulse pattern generator and thus the generation of increased output voltages. In detail, we designed and investigated two different Wilkinson power dividers: the one-stage three-section Wilkinson power divider with extended bandwidth and the two-stage single-section Wilkinson divider with more outputs to combine four parallel series arrays. They were both integrated with triple-stacked Josephson junction series arrays. Additionally, a new modulator pulse amplifier was introduced into the JAWS set-up to provide sufficient power for all the junction arrays. Our measurement results show that spectrally pure sinusoidal waveforms were successfully generated with both types of power dividers. With the one-stage three-section Wilkinson power divider, we obtained RMS voltages of nearly 53 mV at a clock-frequency of 15 GHz combined with a test array of 3000 Josephson junctions. As for the two-stage single-section Wilkinson power divider combined with a test array of 6000 Josephson junctions, we synthesized RMS output voltages of about 105 mV. These test results show a promising prospect for quantum voltage standard applications.

IEEE Transactions on Applied Superconductivity•Jan 28, 2021•9 citations

Bipolar Waveform Synthesis With an Optically Driven Josephson Arbitrary Waveform Synthesizer

Justus A. Brevik, Dahyeon Lee, Anna E. Fox +6 more

An array of Josephson junctions (JJs) was driven with photonically generated current pulses to synthesize a high-fidelity 1 kHz bipolar voltage waveform with a quantum-based amplitude that can be directly related to fundamental constants. A photodiode capable of producing high average photocurrent was used to generate large-amplitude current pulses that were ac-coupled to a JJ array. The resulting bipolar current pulses have enabled the first demonstration of quantum-based bipolar waveform synthesis with an optical drive. We measured the quantum locking range with respect to several operating parameters, including 1.2 mA with respect to a dc bias current applied to the array, confirming the robust synthesis of bipolar waveforms.

IEEE Transactions on Applied Superconductivity•Apr 19, 2022•14 citations
After demonstrating bipolar waveforms in 2020, PTB’s optical pulse transmission drive has been expanded for two independent Josephson junction arrays. Passive optical power splitters divide the two independent optical channels at room temperature. Balanced photodiodes modules in liquid helium then generate ternary electrical pulses to drive the nearby Josephson junction arrays via coplanar waveguides less than 10 mm long. The outputs of the Josephson junction arrays are connected in series and we successfully synthesized bipolar sinewaves at 1 kHz and 35 mV rms amplitude with higher harmonics suppressed by more than 96 dBc.
Abstract We have successfully operated two Josephson junction arrays in parallel with photonically generated current pulses to achieve higher output voltages with our optical pulse drive setup. Passive optical power splitters divide each optical channel at room temperature in order to illuminate multiple cryogenic photodiodes at 4 K , located near the arrays. The balanced photodiode configurations bias the Josephson junctions with ternary current pulses to generate a 1 kHz bipolar sinusoidal voltage with a nominal root mean square amplitude of 85 mV . We determined a spurious free dynamic range and total harmonic distortion of 110.6 dBc and − 105.0 dB from the spectrum of the synthesized signal. Applying an additional dither current to each array individually yielded a quantum locking range of 0.4 mA and 0.6 mA . Furthermore, the quantum locked operation was confirmed to remain stable when the optical output power of the laser diodes and the DC bias of the Mach–Zehnder modulators were varied. A stability measurement of the output amplitude over more than half an hour confirmed sufficiently wide operating margins, further demonstrating a reliable optical Josephson arbitrary waveform synthesizer setup suitable for generating quantum-based waveform with high spectral purity traceable to fundamental constants. To our knowledge, this is the highest amplitude generated with optically driven Josephson junctions so far and the first successful proof of principle for parallelizing the optical pulse drive to achieve higher output voltages in the future.
This paper presents the latest progress on PTB’s parallel optical pulse-drive for AC Josephson voltage standards. Joint operation of multiple Josephson junction arrays with pulses transmitted via parallel optical channels is demonstrated using two series-connected arrays driven by a four-channel parallel optical pulse-drive. A 1 kHz bipolar sine wave with an 85 mV root mean square amplitude is synthesized, with harmonics suppressed by more than 110 dBc and a quantum locking range of 0.4 mA. Further, an expanded setup is introduced in which eight series-connected Josephson junction arrays are driven by a 16-channel parallel optical pulse-drive to synthesize bipolar signals with root mean square amplitudes of 1 V.
Pulse-driven Josephson voltage standards are used to generate quantum-based, spectrally pure AC voltage signals. The current pulses that drive the Josephson arrays can be transmitted optically and recent progress has demonstrated the operation of fast photodiodes at 4 K. In order to generate bipolar waveforms, two photodiodes are required to generate positive and negative pulses close to the Josephson array. We describe our optoelectronic setup and will present first results on a ternary pulse drive at the conference.
The report describes the most recent PTB developments and applications of large Josephson arrays for the generation of very precise sine waves and arbitrary waveforms. By means of large70 GHz sine-wave-driven binary arrays, AC voltages with frequencies up to 1 kHz and amplitudes of more than 10 V were generated with an uncertainty of better than 1μV/V. For the fabrication of this array type with up to 70000 junctions in series connection, an SNS junction technology with NbxSix-1barriers is now completely installed and permanently in use. With pulse-driven arrays of Josephson junctions, arbitrary waveforms were generated with a level of higher harmonics smaller than -120 dBc for frequencies from 150 Hz to 100 kHz at rms voltages less than 100 mV. These results were achieved with extended arrays of up to 4795 very small SNS junctions with Hf0.5Ti0.5barriers. Also the NbSi-technology technology has successfully been applied for the fabrication of pulse-driven Josephson arrays. As it seems to be difficult to considerably increase the wave amplitude by enhancing the junction number of the arrays, experiments were performed to combine a binary array system with a pulse-driven system with the goal to make use of the high amplitude of stepwise generated waves without losing the low noise and precision of quantum based rf waveforms generated by pulse trains at a clock frequency of 15 GHz.
This paper describes recent developments for increasing the output voltage of the Josephson Arbitrary Waveform Synthesizer (JAWS) at PTB. For this purpose, we developed modified broadband Wilkinson power dividers, which enable the operation of two or four Josephson junction series arrays per RF channel of the pulse pattern generator and thus the generation of increased output voltages. In detail, we designed and investigated two different Wilkinson power dividers: the one-stage three-section Wilkinson power divider with extended bandwidth and the two-stage single-section Wilkinson divider with more outputs to combine four parallel series arrays. They were both integrated with triple-stacked Josephson junction series arrays. Additionally, a new modulator pulse amplifier was introduced into the JAWS set-up to provide sufficient power for all the junction arrays. Our measurement results show that spectrally pure sinusoidal waveforms were successfully generated with both types of power dividers. With the one-stage three-section Wilkinson power divider, we obtained RMS voltages of nearly 53 mV at a clock-frequency of 15 GHz combined with a test array of 3000 Josephson junctions. As for the two-stage single-section Wilkinson power divider combined with a test array of 6000 Josephson junctions, we synthesized RMS output voltages of about 105 mV. These test results show a promising prospect for quantum voltage standard applications.
An array of Josephson junctions (JJs) was driven with photonically generated current pulses to synthesize a high-fidelity 1 kHz bipolar voltage waveform with a quantum-based amplitude that can be directly related to fundamental constants. A photodiode capable of producing high average photocurrent was used to generate large-amplitude current pulses that were ac-coupled to a JJ array. The resulting bipolar current pulses have enabled the first demonstration of quantum-based bipolar waveform synthesis with an optical drive. We measured the quantum locking range with respect to several operating parameters, including 1.2 mA with respect to a dc bias current applied to the array, confirming the robust synthesis of bipolar waveforms.