Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical and Quantum Electronics

Normal-mode splitting, sideband cooling and force sensitivity in a linear and quadratic optomechanical system with phase noise

Qing He, Yufeng Bai, Fazal Badshah, Liping Li, Haoqiang Qi

Published Jun 2, 2024• 5 citations
Publisher

Abstract

Abstract In a linear and quadratic optomechanical system (OMS) with optical parametric amplifier's phase noise, we consider a study on normal-mode splitting, sideband cooling and force sensitivity. The system encompasses an optical cavity, a mechanical membrane and a degenerate optical parametric amplifier (OPA). When there is OPA's pump phase noise, normal-mode splitting still occurs and displays more complex splitting than the case of no phase noise. Specifically, for increasing quadratic coupling, the left peak shrinks steadily until it vanishes while the right peak increases to a larger value. In addition, the nonlinear gain of OPA and the quadratic coupling parameter play a key role as cooling the mechanical membrane in the existence of certain phase noise. Phase noise needs to be reduced, and the proper parameters (i.e., the nonlinear gain of OPA and the quadratic coupling) are helpful to improve the cooling effect. Furthermore, in the presence of OPA's phase noise, when the value of quadratic coupling is negative, the standard quantum limit is beaten and force sensitivity can be enhanced with the higher negative values of quadratic coupling. In the realm of quantum optomechanics, our proposed scheme has viable applications in enhancing the performance of quantum manipulation and precision measurement.

DOI
10.1007/s11082-024-07052-9

Related papers

Normal-mode splitting in an optomechanical system enhanced by an optical parametric amplifier and coherent feedback

Yue Li, Yijian Wang, Hengxin Sun +2 more

Abstract Normal-mode splitting (NMS) is an evident signature of strong coupling interactions for observing quantum phenomena, such as optomechanical squeezing and entanglement. In the previous literature, optical parametric amplifier (OPA) and coherent feedback are independently proposed to enhance the NMS. Here, we combine OPA and coherent feedback into a single optomechanical system to enhance the NMS. Controllable parameters, such as input optical power, OPA gain and phase, coherent feedback strength, are varied to observe NMS variations. In particular, we consider positive and negative feedback in terms of the amplitude reflectivity of the beam splitter for coherent feedback. The NMS appears mostly with the positive coherent feedback rather than the negative. Furthermore, the largest mode separation occurs at an OPA phase of approximately − π / 4 rather than zero because the effective cavity detuning changes the effective intracavity round-trip phase, and therefore changes the OPA amplification/deamplification condition. The results indicate that the interplay between OPA and coherent feedback can enhance the NMS with more controllable parameter freedoms. This scheme provides a promising way to increase the optomechanical coupling strength, thereby having potential applications in the ground state cooling of a mechanical oscillator, the preparation of optomechanical quantum states, and the sensitive detection of a weak force.

arXiv:2210.04197•Journal of Optics•May 3, 2023•8 citations

Improving the cooling of a mechanical oscillator in a dissipative optomechanical system with an optical parametric amplifier

Sumei Huang, Aixi Chen

The ground-state cooling of a macroscopic mechanical oscillator is a crucial prerequisite for implementing the quantum manipulation of the mechanical oscillator. Here we show that a degenerate optical parametric amplifier (OPA) can significantly improve the cooling of the mechanical membrane in the purely dissipative coupling system in the unresolved sideband regime. In the presence of the OPA with a parametric phase $\ensuremath{\pi}/2$, the mechanical membrane can be cooled from room temperature 293 K to 10 mK, a factor of 112 lower than that in the absence of the OPA. If the mechanical oscillator is precooled to 0.1 K, the mechanical membrane can be cooled into the microkelvin regime.

Physical Review A•Dec 12, 2018•45 citations

Surpassing the standard quantum limit via gain-assisted auxiliary cavities and parametric amplification

Yingjian Zhu, Xue Yan Han, Hong‐Fu Wang +1 more

The detection of weak forces plays a crucial role in various fields, from gravitational wave astronomy to biological sensing. A fundamental limitation in such measurements arises from quantum and thermal noise. Here, we present a theoretical scheme for force sensing that incorporates an optical parametric amplifier (OPA) in conjunction with a gain-assisted auxiliary cavity. We show that, in contrast to conventional lossy configurations, the presence of optical gain in the auxiliary cavity enables a substantial enhancement in sensitivity, allowing the system to exceed the standard quantum limit across a broad detection bandwidth. By carefully tuning the gain parameter, cavity-cavity coupling strength, OPA driving phase, and detuning conditions, the system achieves optimal noise suppression. Remarkably, this performance persists even under a twentyfold increase in environmental temperature, underscoring the robustness of the proposed scheme. Detailed noise analysis reveals that the contribution of the gain-assisted auxiliary cavity appears to be a negative value in the noise spectrum, effectively reducing the overall noise level of the system. This study is of significant importance to the design and fabrication of high-performance optomechanical sensors.

Optics Express•Aug 25, 2025•0 citations

Manifestation of classical nonlinear dynamics in optomechanical entanglement with a parametric amplifier

Chang‐Sheng Hu, Li-Tuo Shen, Zhen‐Biao Yang +3 more

Cavity optomechanical systems involving an optical parametric amplifier (OPA) can exhibit rich classical and quantum dynamical behaviors. By simply modulating the frequency of the laser pumping the OPA, we find two interesting parameter regimes, with one of them enabling us to study quantum-classical correspondence in system dynamics, while there exist no classical counterparts of the quantum features for the other. For the detuning of the laser pumping around the mechanical frequency, as the parametric gain of OPA increases to a critical value, the classical dynamics of the optical or mechanical modes can experience a transition from the regular periodic oscillation to a period-doubling motion, in which case the light-mechanical entanglement can be well studied by the logarithmic negativity and can manifest the dynamical transition the classical nonlinear dynamics. In addition, the optomechanical entanglement shows a second-order transition characteristic at the critical parametric gain. For the laser detuning being about twice the mechanical frequency, the kind of normal mode splitting comes up in the laser detuning dependence of optomechanical entanglement, which is induced by the squeezing of the optical and mechanical hybrid modes and finds no classical correspondence. The OPA-assisted optomechanical systems therefore offer a simple way to study and exploit quantum manifestations of classical nonlinear dynamics.

arXiv:1906.06101•Physical Review A•Oct 18, 2019•39 citations

Force sensing in a dissipative optomechanical system in the presence of parametric amplifier’s pump phase noise

Asad Mehmood, Sajid Qamar, Shahid Qamar

Abstract In this paper, we study the effects of phase noise associated with the pump laser which drives the parametric amplifier (PA) on the detection of a weak classical force acting on a free test mass. The optomechanical system is considered to be dissipatively coupled. The presence of PA in a dissipatively coupled optomechanical system allows to achieve force sensitivity much better than the standard quantum limit (SQL) for a wider range of detection frequency (Huang and Agarwal 2017 Phys. Rev. A 95 023844). However, our results show that the introduction of pump phase noise into the system strongly effects the force sensing. Interestingly, we find that for an optimum choice of different parameters, one can still realize force sensing better than SQL even in the presence of pump phase noise of PA.

Physica Scripta•Apr 9, 2019•12 citations

Enhancing force sensing in a squeezed optomechanical system with quantum non-demolition measurement

Shi‐Lei Chao, Zihao Li, Xin‐You Lü

Abstract A theoretical scheme is proposed to enhance the sensitivity of force sensors with quantum non-demolition measurement (QND) in an optomechanical setup assisted by four-tone optical driving and an optical parametric amplifier (OPA). With the help of special drive, the system can be simplified as the typical type of QND for force sensing, so that the backaction noise can be evaded to surpass the standard quantum limit. Besides, the added noise can be suppressed owing to the modified optical susceptibility resulting from the OPA. By introducing two oscillators coupling with two charged bodies respectively, the signal can be enhanced with the nonlinearity caused by Coulomb interaction, while the noise presents an exponential decrease. Moreover, considering the homodyne detection effect, the range of system parameters and frequency bands will be broadened. The present investigation may provide a route toward simultaneously evading backaction noise, reducing the mechanical thermal noise, and enhancing the external signal, which can be an alternative design for sensitive devices.

Communications in Theoretical Physics•Nov 13, 2023•3 citations
Abstract In a linear and quadratic optomechanical system (OMS) with optical parametric amplifier's phase noise, we consider a study on normal-mode splitting, sideband cooling and force sensitivity. The system encompasses an optical cavity, a mechanical membrane and a degenerate optical parametric amplifier (OPA). When there is OPA's pump phase noise, normal-mode splitting still occurs and displays more complex splitting than the case of no phase noise. Specifically, for increasing quadratic coupling, the left peak shrinks steadily until it vanishes while the right peak increases to a larger value. In addition, the nonlinear gain of OPA and the quadratic coupling parameter play a key role as cooling the mechanical membrane in the existence of certain phase noise. Phase noise needs to be reduced, and the proper parameters (i.e., the nonlinear gain of OPA and the quadratic coupling) are helpful to improve the cooling effect. Furthermore, in the presence of OPA's phase noise, when the value of quadratic coupling is negative, the standard quantum limit is beaten and force sensitivity can be enhanced with the higher negative values of quadratic coupling. In the realm of quantum optomechanics, our proposed scheme has viable applications in enhancing the performance of quantum manipulation and precision measurement.
Abstract Normal-mode splitting (NMS) is an evident signature of strong coupling interactions for observing quantum phenomena, such as optomechanical squeezing and entanglement. In the previous literature, optical parametric amplifier (OPA) and coherent feedback are independently proposed to enhance the NMS. Here, we combine OPA and coherent feedback into a single optomechanical system to enhance the NMS. Controllable parameters, such as input optical power, OPA gain and phase, coherent feedback strength, are varied to observe NMS variations. In particular, we consider positive and negative feedback in terms of the amplitude reflectivity of the beam splitter for coherent feedback. The NMS appears mostly with the positive coherent feedback rather than the negative. Furthermore, the largest mode separation occurs at an OPA phase of approximately − π / 4 rather than zero because the effective cavity detuning changes the effective intracavity round-trip phase, and therefore changes the OPA amplification/deamplification condition. The results indicate that the interplay between OPA and coherent feedback can enhance the NMS with more controllable parameter freedoms. This scheme provides a promising way to increase the optomechanical coupling strength, thereby having potential applications in the ground state cooling of a mechanical oscillator, the preparation of optomechanical quantum states, and the sensitive detection of a weak force.
The ground-state cooling of a macroscopic mechanical oscillator is a crucial prerequisite for implementing the quantum manipulation of the mechanical oscillator. Here we show that a degenerate optical parametric amplifier (OPA) can significantly improve the cooling of the mechanical membrane in the purely dissipative coupling system in the unresolved sideband regime. In the presence of the OPA with a parametric phase $\ensuremath{\pi}/2$, the mechanical membrane can be cooled from room temperature 293 K to 10 mK, a factor of 112 lower than that in the absence of the OPA. If the mechanical oscillator is precooled to 0.1 K, the mechanical membrane can be cooled into the microkelvin regime.
The detection of weak forces plays a crucial role in various fields, from gravitational wave astronomy to biological sensing. A fundamental limitation in such measurements arises from quantum and thermal noise. Here, we present a theoretical scheme for force sensing that incorporates an optical parametric amplifier (OPA) in conjunction with a gain-assisted auxiliary cavity. We show that, in contrast to conventional lossy configurations, the presence of optical gain in the auxiliary cavity enables a substantial enhancement in sensitivity, allowing the system to exceed the standard quantum limit across a broad detection bandwidth. By carefully tuning the gain parameter, cavity-cavity coupling strength, OPA driving phase, and detuning conditions, the system achieves optimal noise suppression. Remarkably, this performance persists even under a twentyfold increase in environmental temperature, underscoring the robustness of the proposed scheme. Detailed noise analysis reveals that the contribution of the gain-assisted auxiliary cavity appears to be a negative value in the noise spectrum, effectively reducing the overall noise level of the system. This study is of significant importance to the design and fabrication of high-performance optomechanical sensors.
Cavity optomechanical systems involving an optical parametric amplifier (OPA) can exhibit rich classical and quantum dynamical behaviors. By simply modulating the frequency of the laser pumping the OPA, we find two interesting parameter regimes, with one of them enabling us to study quantum-classical correspondence in system dynamics, while there exist no classical counterparts of the quantum features for the other. For the detuning of the laser pumping around the mechanical frequency, as the parametric gain of OPA increases to a critical value, the classical dynamics of the optical or mechanical modes can experience a transition from the regular periodic oscillation to a period-doubling motion, in which case the light-mechanical entanglement can be well studied by the logarithmic negativity and can manifest the dynamical transition the classical nonlinear dynamics. In addition, the optomechanical entanglement shows a second-order transition characteristic at the critical parametric gain. For the laser detuning being about twice the mechanical frequency, the kind of normal mode splitting comes up in the laser detuning dependence of optomechanical entanglement, which is induced by the squeezing of the optical and mechanical hybrid modes and finds no classical correspondence. The OPA-assisted optomechanical systems therefore offer a simple way to study and exploit quantum manifestations of classical nonlinear dynamics.
Abstract In this paper, we study the effects of phase noise associated with the pump laser which drives the parametric amplifier (PA) on the detection of a weak classical force acting on a free test mass. The optomechanical system is considered to be dissipatively coupled. The presence of PA in a dissipatively coupled optomechanical system allows to achieve force sensitivity much better than the standard quantum limit (SQL) for a wider range of detection frequency (Huang and Agarwal 2017 Phys. Rev. A 95 023844). However, our results show that the introduction of pump phase noise into the system strongly effects the force sensing. Interestingly, we find that for an optimum choice of different parameters, one can still realize force sensing better than SQL even in the presence of pump phase noise of PA.
Abstract A theoretical scheme is proposed to enhance the sensitivity of force sensors with quantum non-demolition measurement (QND) in an optomechanical setup assisted by four-tone optical driving and an optical parametric amplifier (OPA). With the help of special drive, the system can be simplified as the typical type of QND for force sensing, so that the backaction noise can be evaded to surpass the standard quantum limit. Besides, the added noise can be suppressed owing to the modified optical susceptibility resulting from the OPA. By introducing two oscillators coupling with two charged bodies respectively, the signal can be enhanced with the nonlinearity caused by Coulomb interaction, while the noise presents an exponential decrease. Moreover, considering the homodyne detection effect, the range of system parameters and frequency bands will be broadened. The present investigation may provide a route toward simultaneously evading backaction noise, reducing the mechanical thermal noise, and enhancing the external signal, which can be an alternative design for sensitive devices.