Metasurfaces made of subwavelength silicon nanopillars provide unparalleled capacity to manipulate light, and have emerged as one of the leading platforms for developing integrated photonic devices. In this study, we report on a compact, passive approach based on planar metasurface optics to generate large optical trap arrays. The unique configuration is achieved with a meta-hologram to convert a single incident laser beam into an array of individual beams, followed up with a metalens to form multiple laser foci for single rubidium atom trapping. We experimentally demonstrate two-dimensional arrays of 5 × 5 and 25 × 25 at the wavelength of 830 nm, validating the capability and scalability of our metasurface design. Beam waists ∼1.5 µm, spacings (about 15 µm), and low trap depth variations (8%) of relevance to quantum control for an atomic array are achieved in a robust and efficient fashion. The presented work highlights a compact, stable, and scalable trap array platform well-suitable for Rydberg-state mediated quantum gate operations, which will further facilitate advances in neutral atom quantum computing.
Metasurfaces made of subwavelength silicon nanopillars provide unparalleled capacity to manipulate light, and have emerged as one of the leading platforms for developing integrated photonic devices. In this study, we report on a compact, passive approach based on planar metasurface optics to generate large optical trap arrays. The unique configuration is achieved with a meta-hologram to convert a single incident laser beam into an array of individual beams, followed up with a metalens to form multiple laser foci for single rubidium atom trapping. We experimentally demonstrate two-dimensional arrays of 5 × 5 and 25 × 25 at the wavelength of 830 nm, validating the capability and scalability of our metasurface design. Beam waists ∼1.5 µm, spacings (about 15 µm), and low trap depth variations (8%) of relevance to quantum control for an atomic array are achieved in a robust and efficient fashion. The presented work highlights a compact, stable, and scalable trap array platform well-suitable for Rydberg-state mediated quantum gate operations, which will further facilitate advances in neutral atom quantum computing.
Trapped neutral atoms are one of the leading platforms for quantum information technologies, in particular for quantum computing, but scaling them to array sizes needed for utility-scale quantum computing is a major engineering challenge. Here we review optical metasurfaces as an enabling technology that provides fine control over the phase, amplitude, and polarization of light, with pixel counts far exceeding what is available with spatial light modulators (SLMs) and other active devices. The large pixel counts have recently led to demonstrations of arrays of optical tweezers with hundreds of thousands of sites and arrays of optical bottle-beams with complex three-dimensional trapping profiles. The flexibility and scalability of optical metasurfaces provides a route towards miniaturized, integrated, and highly scalable atomic experiments and instruments.
Scalability remains a major challenge in building practical fault-tolerant quantum computers. Currently, the largest number of qubits achieved across leading quantum platforms ranges from hundreds to thousands. In atom arrays, scalability is primarily constrained by the capacity to generate large numbers of optical tweezers, and conventional techniques using acousto-optic deflectors or spatial light modulators struggle to produce arrays much beyond ∼10,000 tweezers. Moreover, these methods require additional microscope objectives to focus the light into micrometer-sized spots, which further complicates system integration and scalability. Here, we demonstrate the experimental generation of an optical tweezer array containing 280×280 spots using a metasurface, nearly an order of magnitude more than most existing systems. The metasurface leverages a large number of subwavelength phase-control pixels to engineer the wavefront of the incident light, enabling both large-scale tweezer generation and direct focusing into micron-scale spots without the need for a microscope. This result shifts the scalability bottleneck for atom arrays from the tweezer generation hardware to the available laser power. Furthermore, the array shows excellent intensity uniformity exceeding 90%, making it suitable for homogeneous single-atom loading and paving the way for trapping arrays of more than 10,000 atoms in the near future.
Optical metasurfaces of subwavelength pillars have provided new capabilities for the versatile definition of the amplitude, phase, and polarization of light.In this work, we demonstrate that an efficient dielectric metasurface lens can be used to trap and image single neutral atoms with a long working distance from the lens of 3 mm.We characterize the high-numerical-aperture optical tweezers using the trapped atoms and compare with numerical computations of the metasurface-lens performance.We predict that future metasurfaces for atom trapping will be able to leverage multiple ongoing developments in metasurface design and enable multifunctional control in complex quantum information experiments with neutral-atom arrays.
Optical tweezer arrays of laser-cooled and individually controlled particles have revolutionized atomic, molecular, and optical physics. They afford exquisite capabilities for applications in quantum simulation of many-body physics, quantum computation, and sensing. Underlying this development is the technical maturity of generating scalable optical beams, enabled by active components and a high numerical aperture objective. However, such a complex combination of bulk optics outside the vacuum chamber is very sensitive to any vibration and drift. Here, we demonstrate the generation of a 3 × 3 static tweezer array with a single chip-scale multifunctional metasurface element in vacuum, replacing the meter-long free space optics. Fluorescence counts on the camera validate the successful trapping of the atomic ensemble array and showcase a promising strategy for integrated photonics with cold atom systems. The introduction of a polarization independent dual-wavelength metasurface significantly enhances fluorescence collection efficiency while reducing experimental complexity. This approach paves the way for scalable neutral atom platforms and offers a compelling route towards the realization of next generation quantum metasurfaces.
Single atoms are promising candidates for physically implementing quantum bits, the fundamental unit of quantum information. We have built an apparatus for cooling, trapping and imaging single rubidium atoms in microscopic optical tweezers. The traps are formed from a tightly focused off-resonant laser beam, which traps atoms using the optical dipole force. The traps have a diameter of ~1 μm and a depth of ~1 mK. The novelty of our approach is the use a digital mirror device (DMD) to generate multiple independently movable tweezers from a single laser beam. The DMD consists of an array of micro-mirrors that can be switched on and off, thus acting as a binary amplitude modulator. We use the DMD to imprint a computer-generated hologram on the laser beam, which is converted in to the desired arrangement of traps in the focal plane of a lens. We have developed fast algorithms for calculating binary holograms suitable for the DMD. In addition, we use this method to measure and correct for errors in the phase of the wavefront caused by optical aberrations, which is necessary for producing diffraction-limited focal spots. Using this apparatus, we have trapped arrays of up to 20 atoms with arbitrary geometrical arrangements. We exploit light-assisted collisions between atoms to ensure there is at most one atom per trapping site. We measure the temperature of the atoms in the traps to be 12 μK, and their lifetime to be 1.4 s. Finally, we demonstrate the ability to select individual atoms from an array and transport them over a distance of 14μm with laser cooling, and 5 μm without.
Neutral atoms trapped and manipulated by laser light provide experimentally well accessible quantum systems allowing for a high degree of control over external and internal degrees of freedom. Arrays of dipole traps in which the atoms are confined individually in a configurable geometry constitute a versatile platform for quantum simulation and information applications. By exciting these atoms into Rydberg states, interactions of variable strength and range can be introduced into the system, allowing for the implementation of entangling gate operations or spin Hamiltonians. A crucial requirement for these schemes to function in a reliable way is the ability to create defect-free arrays of single atoms. This is generally a challenge in these types of systems, as common atom loading schemes are limited to roughly 50% probability of filling each site. In this work, a technique for the rearrangement of atoms within a scalable architecture based on micro-optical lens arrays was developed and implemented, resulting in the creation of uniformly filled regions containing more than 100 atoms, which represent the largest defect-free structures realized so far in systems of this kind. This was accomplished by filling the empty traps in a pre-defined pattern with an atom one by one using an optical tweezer. Thus, structures with up to 5 x 5 atoms could be rendered defect-free in more than 99% of attempts. Although the success rate drops below unity for larger clusters, a value of 3.1% for a 100-atom structure is still viable for experiments working with post-selection methods. The filling fraction of even the largest examined structures was observed to be higher than 88%, surpassing common loading schemes by a significant margin. The measurements presented in this thesis build on a region of the array containing 361 sites, being limited by available laser power. In contrast, the addressable range of the optical tweezer includes more than 1500 sites and microlens arrays with up to a million lenses are commercially available. By implementing coherent Rydberg excitation of this assembled atom array, significant progress toward a universal quantum computer or flexible quantum simulator has been made. Using a two-photon excitation scheme, coherent dynamics between the ground and Rydberg state could be observed simultaneously in a 5 x 5 region of the array, with two-photon Rabi frequencies on the order of Omega = 2Pi x 500kHz measured for a Rydberg laser beam waist of w_0,B = 18.7(10) µm. The choice of an appropriate Rydberg state and interatomic spacing led to the presence of strong nearest-neighbor interactions and allowed for the demonstration of the Rydberg blockade effect by observing a collective enhancement of the Rabi frequency consistent with the expected scaling ~ sqrt(N) as well as the suppression of multiple excitations. This mechanism represents the fundamental constituent of a two-qubit gate operation. The architecture introduced in this work offers a scalability unique among quantum simulation platforms and the presented results underpin its potential to propel the atom-optical approach for quantum information processing beyond the threshold of quantum supremacy. Different approaches for scaling up the system have been explored, indicating that defect-free structures of more than 1000 atoms are within range with feasible experimental improvements. Through a detailed analysis of the factors limiting the coherence of the observed dynamics, strategies for future experimental improvements have been developed. Among these, increasing the coupling strength to the Rydberg state into the megahertz regime by increasing laser power and implementing single-site addressing represents the most straight-forward and promising approach.