Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physica Scripta

Chaos generation of superconducting quantum bits coupled with LC resonant circuits

Lian-E Lu, Jian-Zhuang Wu, Yonghong Ma

Published May 2, 2024• 5 citations
Publisher

Abstract

Abstract The dynamics of chaos have been widely used in nonlinear science, such as neural networks, extreme event statistics, and the biophysics of chaos self-organization. Superconducting qubits are artificial atoms based on the Josephson junction structure of nonlinear superconducting devices, offering high design flexibility and ease of coupling and control. In this paper, the generation of chaos through the coupling between superconducting qubits and LC resonant circuits is investigated. By varying the ratio of Josephson energy to charge energy, the coupling coefficient, and the energy of the external driving field, the generation and control of chaos within the system are numerically analyzed. This study provides theoretical support for parameter selection ensuring the confidentiality and fidelity of quantum information transmission based on the chaotic dynamics of superconducting qubits.

DOI
10.1088/1402-4896/ad468f

Related papers

COUPLING SUPERCONDUCTING FLUX QUBITS USING AC MAGNETIC FLXUES

Yu-xi Liu, Franco Nori

Exploiting the intrinsic nonlinearity of superconducting Josephson junctions, we propose a scalable circuit with superconducting (SC) qubits which is very similar to the successful one now being used for trapped ions. The SC qubits are coupled to the "vibrational" mode provided by a superconducting LC circuit or its equivalent (e.g., a SQUID). Both single-qubit rotations and qubit-LC-circuit couplings/decouplings can be controlled by varying frequencies of the applied ac magnetic fluxes. The circuit is scalable since the qubit-qubit interactions, mediated by the LC circuit, can be selectively performed, and the information transfer can be realized in a controllable way. We also discuss how to control the couplings between the qubit and the data bus via "dressed" qubit states. This approach can also be reduced to the one used for trapped ions.

Foundations of Quantum Mechanics in the Light of New Technology•Jun 1, 2009•0 citations

Fast-tunable resonators and quantum electrical circuits.

Martin Sandberg

In this thesis, measurements on superconducting electrical circuits that exhibit quantum mechanical effects are presented. Nonlinear superconducting circuits can be regarded as artificial atoms with energy spectra that can be engineered. The artificial atoms can be used as quantum bits for quantum computation. By coupling the artificial atoms to the electromagnetic field inside a transmission line resonator, quantum optical effects can be studied in these electrical circuits.The possibility of using a frequency tunable transmission line resonators for coupling of superconducting quantum bits is investigated. Tunable superconducting resonators consisting of coplanar waveguide structures, terminated to ground in one end via a superconducting quantum interference device (SQUID), are characterized. By applying a magnetic field to the SQUID loop, the boundary condition of the resonator changes leading to a change in resonance frequency.A change of the resonance frequency by more than 250 linewidths is demonstrated. It is also demonstrated that the resonator can be tune by several hundred MHz on a time scale that is much shorter than the photon lifetime of the resonator.Circuits containing both one and two transmon qubits coupled to the resonator are characterized. Quantum mechanical interactions between the resonator and the qubits, in form of vacuum Rabi splitting, are observed. Coherent control of a single qubit coupled to the resonator is demonstrated by performing Rabi oscillations of the qubit. In the two qubit case, coherent interaction between the qubits is observed in terms of a nonlinear scaling of the coupling strength between the resonator and the collective two qubit system.Measurements on a strongly driven single Cooper-pair box, using a quantum capacitance readout, are also presented. A rich structure in the response is well explained in terms of longitudinal dressed states of the single-Cooper pair box.When measuring the response of a single-electron box, a gate dependent excess dissipation is observed. The dissipation is understood by considering the internal dynamics of the single electron box. The excess dissipation is modeled as an effective resistance named the Sisyphus resistance.

•Jan 1, 2009•1 citation

Multiphoton transitions in Josephson-junction qubits (Review Article)

S. N. Shevchenko, A. N. Omelyanchouk, E. V. Il’ichev

Two basic physical models, a two-level system and a harmonic oscillator, are realized on the mesoscopic scale as coupled qubit and resonator. The realistic system includes moreover the electronics for controlling the distance between the qubit energy levels and their populations and to read out the resonator’s state, as well as the unavoidable dissipative environment. Such rich system is interesting both for the study of fundamental quantum phenomena on the mesoscopic scale and as a promising system for future electronic devices. We present recent results for the driven superconducting qubit–resonator system, where the resonator can be realized as an LC circuit or a nanomechanical resonator. Most of the results can be described by the semiclassical theory, where a qubit is treated as a quantum two-level system coupled to the classical driving field and the classical resonator. Application of this theory allows to describe many phenomena for the single and two coupled superconducting qubits, among which are the following: the equilibrium-state and weak-driving spectroscopy, Sisyphus damping and amplification, Landau–Zener–Stückelberg interferometry, the multiphoton transitions of both direct and ladder-type character, and creation of the inverse population for lasing.

arXiv:1205.0696•Low Temperature Physics•Apr 1, 2012•46 citations

Tunable Coupling of Superconducting Qubits

Alexandre Blais, Alec Maassen van den Brink, Alexandre M. Zagoskin

We study an LC circuit implemented using a current-biased Josephson junction (CBJJ) as a tunable coupler for superconducting qubits. By modulating the bias current, the junction can be tuned in and out of resonance and entangled with the qubits coupled to it. One can thus implement two-qubit operations by mediating entanglement. We consider the examples of CBJJ and charge-phase qubits. A simple recoupling scheme leads to a generalization to arbitrary qubit designs.

arXiv:cond-mat/0207112•Physical Review Letters•Mar 24, 2003•184 citations

Quantum Chaos and Control in Quantum Computing

Jincheng Zhang

This paper investigates the intersection of quantum chaos and quantum computing control. It explores the potential influence of chaotic behavior within quantum systems on computational processes and proposes control strategies to mitigate these effects. The core argument centers on the recognition of quantum chaos as a crucial, yet often overlooked, element in the precise control required for reliable quantum computation. Through the application of chaos theory, this work analyzes the manifestation of chaotic dynamics in quantum systems, detailing the implications for qubit stability and gate fidelity. Specific control techniques, including feedback mechanisms and tailored Hamiltonian designs, are examined and discussed, ultimately aiming to harness, rather than suppress, chaotic behavior to potentially enhance certain quantum algorithms. The research contributes to a deeper understanding of the complex relationship between quantum systems and chaos, providing a foundation for the development of more robust and adaptable quantum control protocols. The study utilizes mathematical formalism to rigorously define and analyze the concepts explored, focusing on key equations governing quantum dynamics and chaotic systems.

•Aug 28, 2026•0 citations

Control of microwave photon transmissions in microwave quantum networks by elastic scattering

Jun Ma, P. H. Ouyang, Yaqiang CHAI +3 more

Elastic scattering is one of the useful methods to control the transmission behaviors of microwave photons transporting in microwave quantum networks without energy consumption. Therefore, it is of practical significance for developing microwave quantum devices and constructing multi-node microwave quantum networks. The transmission line embedded by a single Josephson junction can be described by different circuit models (series and parallel). In this work, we first theoretically analyze the transmission characteristics of microwave photons scattered by different elastic scattering models described by series or parallel embedding models, generated by a single LC loop or a nonlinear Josephson junction device, respectively. The classical microwave transport theory predicts that the series LC loop and the parallel LC loop lead to different elastic scattering behaviors of microwave photons, i.e. the series LC circuit yields the resonant reflection and the parallel LC circuit leads alternatively to the resonant transmission. Recently, the transport properties of microwave photons scattered by a Josephson junction embedded in a transmission line have been discussed, and the results suggested that the Josephson junction embedded in the transmission line can be described by a series embedding circuit, which implies the resonant reflection. We argue here that if the Josephson junction is embedded in parallel in the transmission line, the elastically scattered microwave photons should be transmitted by resonant transmission. In order to test which of the above two different embedding circuit models yielding the completely different elastic scattering behaviors, is physically correct, we then fabricate such a device, i.e. a single Joseph junction device embedded in a transmission line, and measure its elastic scattering transmission coefficient at an extremely low temperature. The results are consistent with the expected effect of the parallel embedding circuit model, but inconsistent with the behaviors predicted by the series embedding circuit model in the literature. According to the above theoretical and experimental analyses of the elastic scattering of a single Josephson junction device, we further propose a scheme to control the elastic scattering behavior of microwave photons by modulating a DC superconducting quantum interference device with a bypass current, which can be applied to the construction of a microwave quantum network based on elastic scattering node controls.

Acta Physica Sinica•Jan 1, 2025•0 citations
Abstract The dynamics of chaos have been widely used in nonlinear science, such as neural networks, extreme event statistics, and the biophysics of chaos self-organization. Superconducting qubits are artificial atoms based on the Josephson junction structure of nonlinear superconducting devices, offering high design flexibility and ease of coupling and control. In this paper, the generation of chaos through the coupling between superconducting qubits and LC resonant circuits is investigated. By varying the ratio of Josephson energy to charge energy, the coupling coefficient, and the energy of the external driving field, the generation and control of chaos within the system are numerically analyzed. This study provides theoretical support for parameter selection ensuring the confidentiality and fidelity of quantum information transmission based on the chaotic dynamics of superconducting qubits.
Exploiting the intrinsic nonlinearity of superconducting Josephson junctions, we propose a scalable circuit with superconducting (SC) qubits which is very similar to the successful one now being used for trapped ions. The SC qubits are coupled to the "vibrational" mode provided by a superconducting LC circuit or its equivalent (e.g., a SQUID). Both single-qubit rotations and qubit-LC-circuit couplings/decouplings can be controlled by varying frequencies of the applied ac magnetic fluxes. The circuit is scalable since the qubit-qubit interactions, mediated by the LC circuit, can be selectively performed, and the information transfer can be realized in a controllable way. We also discuss how to control the couplings between the qubit and the data bus via "dressed" qubit states. This approach can also be reduced to the one used for trapped ions.
In this thesis, measurements on superconducting electrical circuits that exhibit quantum mechanical effects are presented. Nonlinear superconducting circuits can be regarded as artificial atoms with energy spectra that can be engineered. The artificial atoms can be used as quantum bits for quantum computation. By coupling the artificial atoms to the electromagnetic field inside a transmission line resonator, quantum optical effects can be studied in these electrical circuits.The possibility of using a frequency tunable transmission line resonators for coupling of superconducting quantum bits is investigated. Tunable superconducting resonators consisting of coplanar waveguide structures, terminated to ground in one end via a superconducting quantum interference device (SQUID), are characterized. By applying a magnetic field to the SQUID loop, the boundary condition of the resonator changes leading to a change in resonance frequency.A change of the resonance frequency by more than 250 linewidths is demonstrated. It is also demonstrated that the resonator can be tune by several hundred MHz on a time scale that is much shorter than the photon lifetime of the resonator.Circuits containing both one and two transmon qubits coupled to the resonator are characterized. Quantum mechanical interactions between the resonator and the qubits, in form of vacuum Rabi splitting, are observed. Coherent control of a single qubit coupled to the resonator is demonstrated by performing Rabi oscillations of the qubit. In the two qubit case, coherent interaction between the qubits is observed in terms of a nonlinear scaling of the coupling strength between the resonator and the collective two qubit system.Measurements on a strongly driven single Cooper-pair box, using a quantum capacitance readout, are also presented. A rich structure in the response is well explained in terms of longitudinal dressed states of the single-Cooper pair box.When measuring the response of a single-electron box, a gate dependent excess dissipation is observed. The dissipation is understood by considering the internal dynamics of the single electron box. The excess dissipation is modeled as an effective resistance named the Sisyphus resistance.
Two basic physical models, a two-level system and a harmonic oscillator, are realized on the mesoscopic scale as coupled qubit and resonator. The realistic system includes moreover the electronics for controlling the distance between the qubit energy levels and their populations and to read out the resonator’s state, as well as the unavoidable dissipative environment. Such rich system is interesting both for the study of fundamental quantum phenomena on the mesoscopic scale and as a promising system for future electronic devices. We present recent results for the driven superconducting qubit–resonator system, where the resonator can be realized as an LC circuit or a nanomechanical resonator. Most of the results can be described by the semiclassical theory, where a qubit is treated as a quantum two-level system coupled to the classical driving field and the classical resonator. Application of this theory allows to describe many phenomena for the single and two coupled superconducting qubits, among which are the following: the equilibrium-state and weak-driving spectroscopy, Sisyphus damping and amplification, Landau–Zener–Stückelberg interferometry, the multiphoton transitions of both direct and ladder-type character, and creation of the inverse population for lasing.
This paper investigates the intersection of quantum chaos and quantum computing control. It explores the potential influence of chaotic behavior within quantum systems on computational processes and proposes control strategies to mitigate these effects. The core argument centers on the recognition of quantum chaos as a crucial, yet often overlooked, element in the precise control required for reliable quantum computation. Through the application of chaos theory, this work analyzes the manifestation of chaotic dynamics in quantum systems, detailing the implications for qubit stability and gate fidelity. Specific control techniques, including feedback mechanisms and tailored Hamiltonian designs, are examined and discussed, ultimately aiming to harness, rather than suppress, chaotic behavior to potentially enhance certain quantum algorithms. The research contributes to a deeper understanding of the complex relationship between quantum systems and chaos, providing a foundation for the development of more robust and adaptable quantum control protocols. The study utilizes mathematical formalism to rigorously define and analyze the concepts explored, focusing on key equations governing quantum dynamics and chaotic systems.
Elastic scattering is one of the useful methods to control the transmission behaviors of microwave photons transporting in microwave quantum networks without energy consumption. Therefore, it is of practical significance for developing microwave quantum devices and constructing multi-node microwave quantum networks. The transmission line embedded by a single Josephson junction can be described by different circuit models (series and parallel). In this work, we first theoretically analyze the transmission characteristics of microwave photons scattered by different elastic scattering models described by series or parallel embedding models, generated by a single LC loop or a nonlinear Josephson junction device, respectively. The classical microwave transport theory predicts that the series LC loop and the parallel LC loop lead to different elastic scattering behaviors of microwave photons, i.e. the series LC circuit yields the resonant reflection and the parallel LC circuit leads alternatively to the resonant transmission. Recently, the transport properties of microwave photons scattered by a Josephson junction embedded in a transmission line have been discussed, and the results suggested that the Josephson junction embedded in the transmission line can be described by a series embedding circuit, which implies the resonant reflection. We argue here that if the Josephson junction is embedded in parallel in the transmission line, the elastically scattered microwave photons should be transmitted by resonant transmission. In order to test which of the above two different embedding circuit models yielding the completely different elastic scattering behaviors, is physically correct, we then fabricate such a device, i.e. a single Joseph junction device embedded in a transmission line, and measure its elastic scattering transmission coefficient at an extremely low temperature. The results are consistent with the expected effect of the parallel embedding circuit model, but inconsistent with the behaviors predicted by the series embedding circuit model in the literature. According to the above theoretical and experimental analyses of the elastic scattering of a single Josephson junction device, we further propose a scheme to control the elastic scattering behavior of microwave photons by modulating a DC superconducting quantum interference device with a bypass current, which can be applied to the construction of a microwave quantum network based on elastic scattering node controls.