We studied the outputs that a quantum circuit consisting of four qubits can produce by using quantum gates, which operate on the states of the qubit as a state vector that can be expressed through unitary matrices. We made the change by exploiting the superposition property of the Hadamard gate, and with its presence in the quantum circuit, we used CNOT gates, which produced entangled states . The study explained the output of a quantum circuit consisting of four qubits and gave a methodology for changing this output by installing one input type for the quantum circuit (we used the input ). It showed the importance of measurement in the quantum circuit and its effect on the and the . Starting from, produce all 16 states of the four qubits, which can be expressed as the computational basis state of a vector state using only an x-gate.
We studied the outputs that a quantum circuit consisting of four qubits can produce by using quantum gates, which operate on the states of the qubit as a state vector that can be expressed through unitary matrices. We made the change by exploiting the superposition property of the Hadamard gate, and with its presence in the quantum circuit, we used CNOT gates, which produced entangled states . The study explained the output of a quantum circuit consisting of four qubits and gave a methodology for changing this output by installing one input type for the quantum circuit (we used the input ). It showed the importance of measurement in the quantum circuit and its effect on the and the . Starting from, produce all 16 states of the four qubits, which can be expressed as the computational basis state of a vector state using only an x-gate.
Study of a quantum circuit consisting of four qubits that produces an output state consisting of eight entangled states through the CNOT –gates and the three Hadamard gates. targeting the gates to |q0q1q2q3> to show the other entangled states, We used quantum gates that give the same arrangement as the circuit gates and for the same inputs, taking into account the output of a quantum circuit that contains entangled states. As a general case, we used an X-gate and a SWAP-gate, For inputs|0000> .We obtained a general change to the output state while keeping the eight states maximally entangled.
In this research, a quantum system consists of three qubits is considered; it has eight states (|000˃, |001˃, |010˃, |011˃, |100˃, |101˃, |110˃ and |111˃).Each of these states is passed through a quantum circuit made of a sequence of quantum gates.The circuit applies X-gate on the first qubit from the left, then using CNOT-gate on the first and second qubits and using the Hadamard-gate on the first qubit.Finally, Hadamard-gate is applied on the third qubit.When the state |000˃ is passed as input through the proposed quantum circuit then the output includes four entanglement states; for the other input states the output will be another non-repeatable entanglement states.So, for using all states in quantum circuit the result will be eight equations each one consists of four entanglement states; which called ML-Quadripartite.
In Section 1.3, we introduced the circuit model of (classical) computation. We restricted attention to reversible circuits since they can simulate any non-reversible circuit with modest overhead. This model can be generalized to a model of quantum circuits. In the quantum circuit model, we have logical qubits carried along ‘wires’, and quantum gates that act on the qubits. A quantum gate acting on n qubits has the input qubits carried to it by n wires, and n other wires carry the output qubits away from the gate. A quantum circuit is often illustrated schematically by a circuit diagram as shown in Figure 4.1. The wires are shown as horizontal lines, and we imagine the qubits propagating along the wires from left to right in time. The gates are shown as rectangular blocks. For convenience, we will restrict attention to unitary quantum gates (which are also reversible). Recall from Section 3.5.3 that non-unitary (non-reversible) quantum operations can be simulated by unitary (reversible) quantum gates if we allow the possibility of adding an ancilla and of discarding some output qubits. A circuit diagram describing a superoperator being implemented using a unitary operator is illustrated in Figure 4.2. In the example of Figure 4.1, the 4-qubit state |ψi⟩= |0⟩⊗ |0⟩⊗ |0⟩⊗ |0⟩ enters the circuit at the left (recall we often write this state as |ψi⟩ = |0⟩|0⟩|0⟩|0⟩ or |ψi⟩ = |0000⟩.) These qubits are processed by the gates U1, U2, U3, and U4. At the output of the circuit we have the collective (possibly entangled) 4-qubit state |ψf⟩. A measurement is then made of the resulting state. The measurement will often be a simple qubit-by-qubit measurement in the computational basis, but in some cases may be a more general measurement of the joint state. A measurement of a single qubit in the computational basis is denoted on a circuit diagram by a small triangle, as shown in Figure 4.1 (there are other symbols used in the literature, but we adopt this one). The triangle symbol will be modified for cases in which there is a need to indicate different types of measurements.R50
Quantum Gates and Circuits IntroductionQuantum gates and quantum circuits form the operational core of quantum computation.While earlier chapters focused on the mathematical structure of quantum states and the physical realization of qubits, this chapter addresses how quantum information is manipulated.In classical computing, logic gates such as AND, OR, and NOT operate on bits to implement algorithms.In quantum computing, quantum gates perform analogous roles, but they act on qubits and obey the laws of quantum mechanics [101].Quantum gates differ fundamentally from classical logic gates in several ways.First, quantum gates must be reversible, because the evolution of closed quantum systems is governed by unitary transformations.Second, quantum gates operate on probability amplitudes, not deterministic bit values.Third, quantum gates can generate superposition and entanglement, which have no classical counterparts.These properties allow quantum circuits to exploit interference effects to achieve computational advantages [102].This chapter presents a detailed theoretical discussion of quantum gates and circuits, including both single-qubit and multi-qubit gates.Mathematical representations using unitary matrices are provided, followed by practical implementation using Julia.The chapter concludes with the construction of simple quantum circuits and interpretation of their outputs. Quantum Gates as Unitary OperatorsA quantum gate is mathematically represented by a unitary matrix U acting on a quantum-state vector | : 10.
This paper presents a study of the influence of the quantum phase on the qubit state in circuits with Hadamard gates in series for further minimisation in software or hardware modelling. The study is carried out using the Azure Quantum computing platform to simulate quantum algorithms and run quantum applications on dedicated hardware. The study provides an overview of the qubit as a unit of quantum information, describes in detail the operation of the Hadamard gate, simulates the operation of a circuit of two Hadamard gates in series with initial inputs and , and simulates the operation of a circuit with a sequential shift on and Hadamard gate inputs and . In the course of the study, it was found how the same intermediate state of the qubit can have different outputs after the Hadamard gate, by means of phase. Also, the results of the schemes where the first Hadamard gate is replaced by a sequential shift on . The results obtained can be used to test the Hadamard gate model when creating its digital model. Key words: Hadamard gate, quantum computing, quantum gates, superposition.
The fundamental difference between classical and quantum computation lies in the nature of information representation and logical operations. This paper presents design of quantum circuits to the different classical gates. Quantum gates operate on qubits and are mathematically represented by unitary matrices, ensuring reversibility and preservation of information. In this system, using the Pauli-X gate, Controlled NOT gate, and Toffoli gate, the equivalent classical gates are constructed. The analysis demonstrates that while quantum gates reproduce classical logical outputs for computational basis states, they fundamentally differ in structure, requiring auxiliary qubits to maintain reversibility. Furthermore, quantum gates support superposition and entanglement, which extend computational capabilities beyond classical limitations. This article is result implementation of quantum gates using Qiskit simulation software. The results highlight that quantum logic gates can be viewed as reversible generalizations of classical gates under unitary constraints. This article also analyses the fault-taulorent and cost effectiveness of the designed circuits.