Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Computing, Communication, and Simulation

Precision synchronization over large Doppler ranges for satellite-based free-space quantum networking

Neal W. Spellmeyer, Catherine Lee, Marvin S. Scheinbart, Scott A. Hamilton

Published Mar 13, 2024• 1 citation
Publisher

Abstract

Precision synchronization is vital for long-distance quantum networking in which entanglement swapping between separate sources via an optical Bell state measurement requires temporal overlap of arriving photonic qubits. This challenge is particularly distinct in satellite-based entanglement distribution in which relative motion, channel effects, and propagation delay must be addressed. This work presents recent progress in achieving precision synchronization in a quantum networking testbed configured for a dual-uplink architecture in which photons from sources at two ground locations would interact at Bell-state measurement on a satellite. Results demonstrate sub-ps synchronization in cases of large Doppler arising from satellite motion.

DOI
10.1117/12.3000342

Related papers

Precision synchronization for free-space quantum networking

Neal W. Spellmeyer, Don M. Boroson, P. Ben Dixon +9 more

Precision synchronization is vital for robust long-distance quantum networking over fiber and free-space channels for which high-fidelity entanglement swapping between separate sources via an optical Bell state measurement requires temporal overlap of photonic qubits arriving from either source. This challenge is particularly distinct in satellite-based entanglement distribution in which relative motion, channel effects, and propagation delay must be addressed. This work presents a precision synchronization method for free space entanglement distribution, and reports on risk reduction testing in a quantum networking testbed at MIT Lincoln Laboratory. Primary consideration is for a dual-uplink architecture in which photons from entanglement sources at two ground locations interact in an optical Bell-state measurement implemented on a satellite in a low-earth orbit. The control approach uses independent entanglement sources at each ground location supplemented with a synchronization signal for feedback control from a timing discriminant measured at the spacecraft. The approach is being implemented in a laboratory testbed using 1-GHz repetition rate 1550-nm band entanglement sources generating ~10-MHz source entanglement rates with few-ps photon pulse lengths. The paper describes both fundamental architectural considerations and practical implementation details.

Quantum Computing, Communication, and Simulation•Mar 8, 2023•3 citations

Precision Synchronization for Long-distance Free-space Quantum Networking

Neal W. Spellmeyer, Catherine Lee, Marvin S. Scheinbart +1 more

We describe a laboratory implementation of a precision synchronization technique suitable for high-rate entanglement distribution between two ground sites via a satellite, including recent improvements for extending the technique to larger Doppler ranges.

Quantum 2.0 Conference and Exhibition•Jan 1, 2023•1 citation

A Dual-Uplink Dual-Satellite Architecture for Entanglement Distribution

Charilaos C. Angelidis, Ioannis K. Marmorkos

Satellite-based quantum links are a promising enabler of long-distance entanglement distribution, overcoming the exponential losses of optical fibers. In uplink architectures, entangled photons are generated at ground stations and transmitted to orbiting satellites, reducing space-segment complexity but introducing significant atmospheric and geometric losses. Single-satellite dual-uplink configurations are additionally limited by the requirement of simultaneous visibility between both ground stations and the satellite. In this work, we investigate a dual-uplink dual-satellite network architecture and compare its performance with the single-satellite scheme under identical physical assumptions. The proposed topology introduces an inter-satellite link (ISL) that decouples the ground-station separation from the atmospheric uplink geometry. A realistic channel model is employed, incorporating geometric attenuation, atmospheric turbulence, background noise, and Bell-state measurement efficiency. The overall success probability and practical fidelity are evaluated as functions of satellite altitude and ground-station separation. Our results show that while the single-satellite configuration is suitable for regional-scale networks, it becomes infeasible for large separations due to geometric constraints. The proposed dual-satellite architecture mitigates this limitation and significantly extends the achievable communication distance, representing a key step toward scalable quantum internet infrastructures.

quant-pharXiv:2610.26034•Oct 20, 2026•0 citations

Quantum entanglement distribution via uplink satellite channels

S. Srikara, Hudson Leone, Alexander S. Solnstev +1 more

Significant work has been done to develop quantum satellites, which generate entangled pairs in space and distribute them to ground stations separated some distance away. The reverse “uplink” case, where pairs are generated on the ground and swapped on the satellite using an optical Bell measurement, has not been seriously considered due to a prevailing assumption that it is practically infeasible. In this paper, we illustrate the feasibility of performing Discrete Variable photonic Bell measurements in space by conducting a detailed numerical analysis to estimate the channel efficiency and attainable pair fidelity for various satellite-station configurations. Our model accounts for a wide range of physical effects such as atmospheric effects, stray photons, and mode mismatch. Our findings show promise toward the feasibility of photonic Bell measurements in space, which motivates future research toward large-scale satellite-based uplink entanglement distribution.

arXiv:2409.19985•Physical Review Research•Sep 3, 2025•5 citations

Satellite-mediated Quantum Clock Synchronization: Towards Precise Timing at a Global Scale

Sage Ducoing

Accurate timekeeping is essential for scientific and technological advancements, particularly in areas of communication, networking, navigation, and high precision measurements. While many methods of time resolution are already established using classical resources, they fail to combine high precision outcomes with large-scale implementations. Additionally, numerous quantum networking architectures using satellite-assisted methods have demonstrated quantum communication on scales exceeding ground-based methods. For these reasons, we propose the use of a time synchronization method by which pairs of highly time-correlated photons are exchanged between clocks on satellites and clocks on Earth, al- lowing users to reconstruct the time offsets between their clocks. This is known as Quantum Clock Synchronization (QCS). We analyze global time synchronization, via numerical simulation, using a network of satellites equipped with quantum resources, such as entangled photon sources (SPDC) and single photon detectors. We find that for satellites in low-earth orbits, a configuration of 50 evenly-space satellites provides constant visibility and sub-nanosecond time synchronization to any location on Earth. Due to practical constraints, clocks available for use on satellites are often of lesser quality than those available for ground use. However, by allowing the satellites in our network to synchronize among themselves, we overcome this limitation, forming a highly precise “master clock” capable of global, high precision time synchronization. We then examine the amount of quantum security provided by polarization-entangled photon sources as a potential way to protect an experimental implementation of QCS from attacks such as signal spoofing. To do this, we identify regions on Earth where Bell violations between exchanged entangled photons can ensure quantum security at various confidence vii levels. Combined with similar insights gained from determining the network scale of our QCS protocol at the single-link level, we demonstrate the potential for highly precise, global, and potentially quantum-secure clock synchronization. Finally, we modify our QCS protocol to support frequency, or tick-rate, offsets in addition to constant time offsets. We motivate this by presenting some relativistic effects that can introduce frequency differences between clocks in space and on Earth. Provided that relative velocities between clocks are corrected for, we identify constant and variable clock defects through numerical simulations.

Civil War Book Review•Dec 26, 2025•0 citations

Synchronizing clocks via satellites using entangled photons: Effect of relative velocity on precision

Stav Haldar, Iván Agulló, James E. Troupe

A satellite-based scheme to perform clock synchronization between ground stations spread across the globe using quantum resources was proposed in [Phys. Rev. A 107, 022615 (2023).] based on a quantum clock synchronization (QCS) protocol. Such a scheme could achieve synchronization up to the picosecond level over distances of thousands of kilometers. Nonetheless, the implementation of this QCS protocol has yet to be demonstrated experimentally in situations where the satellite velocities cannot be neglected, as is the case in many realistic scenarios. In this work, we develop analytical and numerical tools to study the effect of the relative velocity between the satellite and ground stations on the success of the QCS protocol. We conclude that the protocol can still run successfully if the data-acquisition window is chosen appropriately. As a demonstration, we simulate the synchronization outcomes for cities across the continental United States using a single satellite in a low earth orbit, low-cost entanglement sources, portable atomic clocks, and avalanche detectors. We conclude that, after including the effect of relative motion, subnanosecond- to picosecond-level precision can still be achieved over distance scales of $\ensuremath{\approx}4000$ km. Such high-precision synchronization is currently not achievable over long distances ($\ensuremath{\gtrsim}100\phantom{\rule{4.pt}{0ex}}\text{km}$) with standard classical techniques including the GPS. The simulation tools developed in this work are in principle applicable to other means of synchronizing clocks using entangled photons, which are expected to form the basis of future quantum networks like the quantum internet, distributed quantum sensing, and the quantum GPS.

arXiv:2306.08146•Physical Review A•Dec 19, 2023•9 citations
Precision synchronization is vital for long-distance quantum networking in which entanglement swapping between separate sources via an optical Bell state measurement requires temporal overlap of arriving photonic qubits. This challenge is particularly distinct in satellite-based entanglement distribution in which relative motion, channel effects, and propagation delay must be addressed. This work presents recent progress in achieving precision synchronization in a quantum networking testbed configured for a dual-uplink architecture in which photons from sources at two ground locations would interact at Bell-state measurement on a satellite. Results demonstrate sub-ps synchronization in cases of large Doppler arising from satellite motion.
Precision synchronization is vital for robust long-distance quantum networking over fiber and free-space channels for which high-fidelity entanglement swapping between separate sources via an optical Bell state measurement requires temporal overlap of photonic qubits arriving from either source. This challenge is particularly distinct in satellite-based entanglement distribution in which relative motion, channel effects, and propagation delay must be addressed. This work presents a precision synchronization method for free space entanglement distribution, and reports on risk reduction testing in a quantum networking testbed at MIT Lincoln Laboratory. Primary consideration is for a dual-uplink architecture in which photons from entanglement sources at two ground locations interact in an optical Bell-state measurement implemented on a satellite in a low-earth orbit. The control approach uses independent entanglement sources at each ground location supplemented with a synchronization signal for feedback control from a timing discriminant measured at the spacecraft. The approach is being implemented in a laboratory testbed using 1-GHz repetition rate 1550-nm band entanglement sources generating ~10-MHz source entanglement rates with few-ps photon pulse lengths. The paper describes both fundamental architectural considerations and practical implementation details.
Satellite-based quantum links are a promising enabler of long-distance entanglement distribution, overcoming the exponential losses of optical fibers. In uplink architectures, entangled photons are generated at ground stations and transmitted to orbiting satellites, reducing space-segment complexity but introducing significant atmospheric and geometric losses. Single-satellite dual-uplink configurations are additionally limited by the requirement of simultaneous visibility between both ground stations and the satellite. In this work, we investigate a dual-uplink dual-satellite network architecture and compare its performance with the single-satellite scheme under identical physical assumptions. The proposed topology introduces an inter-satellite link (ISL) that decouples the ground-station separation from the atmospheric uplink geometry. A realistic channel model is employed, incorporating geometric attenuation, atmospheric turbulence, background noise, and Bell-state measurement efficiency. The overall success probability and practical fidelity are evaluated as functions of satellite altitude and ground-station separation. Our results show that while the single-satellite configuration is suitable for regional-scale networks, it becomes infeasible for large separations due to geometric constraints. The proposed dual-satellite architecture mitigates this limitation and significantly extends the achievable communication distance, representing a key step toward scalable quantum internet infrastructures.
Significant work has been done to develop quantum satellites, which generate entangled pairs in space and distribute them to ground stations separated some distance away. The reverse “uplink” case, where pairs are generated on the ground and swapped on the satellite using an optical Bell measurement, has not been seriously considered due to a prevailing assumption that it is practically infeasible. In this paper, we illustrate the feasibility of performing Discrete Variable photonic Bell measurements in space by conducting a detailed numerical analysis to estimate the channel efficiency and attainable pair fidelity for various satellite-station configurations. Our model accounts for a wide range of physical effects such as atmospheric effects, stray photons, and mode mismatch. Our findings show promise toward the feasibility of photonic Bell measurements in space, which motivates future research toward large-scale satellite-based uplink entanglement distribution.
Accurate timekeeping is essential for scientific and technological advancements, particularly in areas of communication, networking, navigation, and high precision measurements. While many methods of time resolution are already established using classical resources, they fail to combine high precision outcomes with large-scale implementations. Additionally, numerous quantum networking architectures using satellite-assisted methods have demonstrated quantum communication on scales exceeding ground-based methods. For these reasons, we propose the use of a time synchronization method by which pairs of highly time-correlated photons are exchanged between clocks on satellites and clocks on Earth, al- lowing users to reconstruct the time offsets between their clocks. This is known as Quantum Clock Synchronization (QCS). We analyze global time synchronization, via numerical simulation, using a network of satellites equipped with quantum resources, such as entangled photon sources (SPDC) and single photon detectors. We find that for satellites in low-earth orbits, a configuration of 50 evenly-space satellites provides constant visibility and sub-nanosecond time synchronization to any location on Earth. Due to practical constraints, clocks available for use on satellites are often of lesser quality than those available for ground use. However, by allowing the satellites in our network to synchronize among themselves, we overcome this limitation, forming a highly precise “master clock” capable of global, high precision time synchronization. We then examine the amount of quantum security provided by polarization-entangled photon sources as a potential way to protect an experimental implementation of QCS from attacks such as signal spoofing. To do this, we identify regions on Earth where Bell violations between exchanged entangled photons can ensure quantum security at various confidence vii levels. Combined with similar insights gained from determining the network scale of our QCS protocol at the single-link level, we demonstrate the potential for highly precise, global, and potentially quantum-secure clock synchronization. Finally, we modify our QCS protocol to support frequency, or tick-rate, offsets in addition to constant time offsets. We motivate this by presenting some relativistic effects that can introduce frequency differences between clocks in space and on Earth. Provided that relative velocities between clocks are corrected for, we identify constant and variable clock defects through numerical simulations.
A satellite-based scheme to perform clock synchronization between ground stations spread across the globe using quantum resources was proposed in [Phys. Rev. A 107, 022615 (2023).] based on a quantum clock synchronization (QCS) protocol. Such a scheme could achieve synchronization up to the picosecond level over distances of thousands of kilometers. Nonetheless, the implementation of this QCS protocol has yet to be demonstrated experimentally in situations where the satellite velocities cannot be neglected, as is the case in many realistic scenarios. In this work, we develop analytical and numerical tools to study the effect of the relative velocity between the satellite and ground stations on the success of the QCS protocol. We conclude that the protocol can still run successfully if the data-acquisition window is chosen appropriately. As a demonstration, we simulate the synchronization outcomes for cities across the continental United States using a single satellite in a low earth orbit, low-cost entanglement sources, portable atomic clocks, and avalanche detectors. We conclude that, after including the effect of relative motion, subnanosecond- to picosecond-level precision can still be achieved over distance scales of $\ensuremath{\approx}4000$ km. Such high-precision synchronization is currently not achievable over long distances ($\ensuremath{\gtrsim}100\phantom{\rule{4.pt}{0ex}}\text{km}$) with standard classical techniques including the GPS. The simulation tools developed in this work are in principle applicable to other means of synchronizing clocks using entangled photons, which are expected to form the basis of future quantum networks like the quantum internet, distributed quantum sensing, and the quantum GPS.