Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)

Real-Time Scale-factor Calibration for Cold-Atom Gyroscope based on Point-Source Interferometry

Nikolaos Dedes, David Harvey, Tim Freegarde

Published Mar 25, 2024• 0 citations
Publisher

Abstract

Point-source interferometry (PSI) is a promising technique that enables the realization of compact and multi-axis cold-atom inertial sensors. However, scale-factor errors in the rotational signal, due to the shape and size of the initial atomic distribution, constitute a major drawback. In this paper, we present a method for calibrating the rotational scale-factor. This method relies on the application of a known bias rotation and a compensation scheme that decouples the PSI sensor from the vehicle’s rotational dynamics. We employ a Kalman filter protocol to track the scale-factor error, paving the way for real-time implementation of the calibration method. Through simulations, we demonstrate the effectiveness of the method and the stabilization of the PSI sensor scale-factor.

DOI
10.1109/inertial60399.2024.10502035

Related papers

Analytical tools for point source interferometry

Gregory W. Hoth, Bruno Pelle, John E. Kitching +1 more

Light pulse atom interferometry can be used to realize high-performance sensors of accelerations and rotations. In order to broaden the range of applications of these sensors, it is desirable to reduce their size and complexity. Point source interferometry (PSI) is a promising technique for accomplishing both of these goals. With PSI, rotations are measured by detecting the orientation and frequency of spatial fringe patterns in the atomic state. These spatial fringes are primarily due to a correlation between an atom's initial velocity and its final position, which is created by the expansion of a cold atom cloud. However, the fringe patterns are also influenced by the structure of the initial atomic distribution. We summarize several methods that can be used to investigate the relationship between the spatial fringe pattern and the initial atomic distribution. This relationship will need to be understood in detail to realize an accurate gyroscope based on PSI.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 20, 2017•1 citation

Trade-offs in size and performance for a point source interferometer gyroscope

Gregory W. Hoth, Bruno Pelle, John E. Kitching +1 more

Point source interferometry (PSI) is a promising technique that could lead to a compact, high-performance gyroscope based on atom interferometry. We consider the trade-offs in size and performance with PSI. In particular, we discuss the sensitivity and dynamic range for a simple PSI gyroscope with an evacuated volume ranging from 1 mm3to 10 cm3. We also discuss the stability required for the initial atomic distribution in order to achieve part-per-million scale factor stability.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•Mar 1, 2017•3 citations

Multi-axis atom interferometer gyroscope with a single source of atoms

Yun-Jhih Chen, Azure Hansen, Gregory W. Hoth +4 more

Using the technique of point source atom interferometry, we characterize the sensitivity of a multi-axis gyroscope based on free-space Raman interrogation of a single source of cold atoms in a glass vacuum cell. The instrument simultaneously measures the acceleration in the direction of the Raman laser beams and the component of the rotation vector in the plane perpendicular to that direction. We characterize the sensitivities for the magnitude and direction of the rotation vector measurement, which are 0.033 $^{\circ}/\mathrm{s}$ and 0.27 $^{\circ}$ with one second averaging time, respectively. The sensitivity could be improved by increasing the Raman interrogation time, allowing the cold-atom cloud to expand further, correcting the fluctuations in the initial cloud shape, and reducing sources of technical noise. The unique ability of the PSI technique to measure the rotation vector in a plane may permit applications of atom interferometry such as tracking the precession of a rotation vector and gyrocompassing.

arXiv:1812.00106•Dec 1, 2018•13 citations

Performance of a point source atom interferometer gyroscope

Azure Hansen, Yun Chen, M. Shuker +6 more

Point source atom interferometry, employing optical Raman pulses and a cold atom source, enables measurements of rotation and acceleration in a compact experimental package. This system is uniquely sensitive to rotations in the plane perpendicular to the Raman beamline. Here we discuss our experiment’s sensitivity, stability, systematic errors, and other performance-limiting factors both fundamentaland technical. Our current measurements for the sensitivity to the magnitude and direction of the rotation vector are 0.6 mrad/s and 5 mrad, respectively.

•Apr 14, 2019•0 citations

Simultaneous multi-axis inertial sensing with point source interferometry

Yujie Cheng, Azure Hansen, M. Shuker +3 more

In point source atom interferometry (PSI), a cloud of laser-cooled atom expands within a pair of counterpropagatingRaman laser beams and, after a beamsplitter-mirror-beamsplitter Raman pulse sequence, asingle snapshot of the expanded cloud allows simultaneous measurements of one axis of acceleration and two axes of rotation. In PSI, the thermal expansion of the cold-atom cloud, which is undesirable in other atom interferometry methods, is used to establish a position-velocity correlation in the expanded atom cloud. This correlation is employed to map the velocity dependence of the interferometric phaseshift onto a two-dimensional spatial image plane. As a result, the thermal velocity spread of the cloud of laser-cooled atoms facilitates the parallel operation of many atom interferometers, which yields the simultaneous multi-axis sensitivity. PSI provides a new approach to applications of atom interferometers in navigation and space science. For example, the 2D rotation measurement with PSI can be used to find geographic north or to measure the precession of a rotation vector. We have developed a scheme using PSI that is amenable to portable applications and we have demonstrated the measurement of a rotation vector in a plane [1]. We will present our recent results on evaluating the performance and systematic errors in a compact setup and discuss our proposals to address the challenges toward implementing ahigh-precision and portable PSI system.

•Apr 8, 2019•0 citations

Compact chip-scale guided cold atom gyrometers for inertial navigation: Enabling technologies and design study

Carlos L. Garrido Alzar

This work reviews the topic of rotation sensing with compact cold atom interferometers. A representative set of compact free-falling cold atom gyroscopes is considered because, in different respects, they establish a rotation-measurement reference for cold guided-atom technologies. This review first discusses enabling technologies relevant to a set of key functional building blocks of an atom chip-based compact inertial sensor with cold guided atoms. These functionalities concern the accurate and reproducible positioning of atoms to initiate a measurement cycle, the coherent momentum transfer to the atom wave packets, the suppression of propagation-induced decoherence due to potential roughness, on-chip detection, and vacuum dynamics because of its impact on sensor stability, which is due to the measurement dead time. Based on the existing enabling technologies, the design of an atom chip gyroscope with guided atoms is formalized using a design case that treats design elements such as guiding, fabrication, scale factor, rotation-rate sensitivity, spectral response, important noise sources, and sensor stability.

arXiv:1912.06851•AVS Quantum Science•Dec 1, 2019•84 citations
Point-source interferometry (PSI) is a promising technique that enables the realization of compact and multi-axis cold-atom inertial sensors. However, scale-factor errors in the rotational signal, due to the shape and size of the initial atomic distribution, constitute a major drawback. In this paper, we present a method for calibrating the rotational scale-factor. This method relies on the application of a known bias rotation and a compensation scheme that decouples the PSI sensor from the vehicle’s rotational dynamics. We employ a Kalman filter protocol to track the scale-factor error, paving the way for real-time implementation of the calibration method. Through simulations, we demonstrate the effectiveness of the method and the stabilization of the PSI sensor scale-factor.
Light pulse atom interferometry can be used to realize high-performance sensors of accelerations and rotations. In order to broaden the range of applications of these sensors, it is desirable to reduce their size and complexity. Point source interferometry (PSI) is a promising technique for accomplishing both of these goals. With PSI, rotations are measured by detecting the orientation and frequency of spatial fringe patterns in the atomic state. These spatial fringes are primarily due to a correlation between an atom's initial velocity and its final position, which is created by the expansion of a cold atom cloud. However, the fringe patterns are also influenced by the structure of the initial atomic distribution. We summarize several methods that can be used to investigate the relationship between the spatial fringe pattern and the initial atomic distribution. This relationship will need to be understood in detail to realize an accurate gyroscope based on PSI.
Using the technique of point source atom interferometry, we characterize the sensitivity of a multi-axis gyroscope based on free-space Raman interrogation of a single source of cold atoms in a glass vacuum cell. The instrument simultaneously measures the acceleration in the direction of the Raman laser beams and the component of the rotation vector in the plane perpendicular to that direction. We characterize the sensitivities for the magnitude and direction of the rotation vector measurement, which are 0.033 ∘/s^{\circ}/\mathrm{s}∘/s and 0.27 ∘^{\circ}∘ with one second averaging time, respectively. The sensitivity could be improved by increasing the Raman interrogation time, allowing the cold-atom cloud to expand further, correcting the fluctuations in the initial cloud shape, and reducing sources of technical noise. The unique ability of the PSI technique to measure the rotation vector in a plane may permit applications of atom interferometry such as tracking the precession of a rotation vector and gyrocompassing.
Point source atom interferometry, employing optical Raman pulses and a cold atom source, enables measurements of rotation and acceleration in a compact experimental package. This system is uniquely sensitive to rotations in the plane perpendicular to the Raman beamline. Here we discuss our experiment’s sensitivity, stability, systematic errors, and other performance-limiting factors both fundamentaland technical. Our current measurements for the sensitivity to the magnitude and direction of the rotation vector are 0.6 mrad/s and 5 mrad, respectively.
In point source atom interferometry (PSI), a cloud of laser-cooled atom expands within a pair of counterpropagatingRaman laser beams and, after a beamsplitter-mirror-beamsplitter Raman pulse sequence, asingle snapshot of the expanded cloud allows simultaneous measurements of one axis of acceleration and two axes of rotation. In PSI, the thermal expansion of the cold-atom cloud, which is undesirable in other atom interferometry methods, is used to establish a position-velocity correlation in the expanded atom cloud. This correlation is employed to map the velocity dependence of the interferometric phaseshift onto a two-dimensional spatial image plane. As a result, the thermal velocity spread of the cloud of laser-cooled atoms facilitates the parallel operation of many atom interferometers, which yields the simultaneous multi-axis sensitivity. PSI provides a new approach to applications of atom interferometers in navigation and space science. For example, the 2D rotation measurement with PSI can be used to find geographic north or to measure the precession of a rotation vector. We have developed a scheme using PSI that is amenable to portable applications and we have demonstrated the measurement of a rotation vector in a plane [1]. We will present our recent results on evaluating the performance and systematic errors in a compact setup and discuss our proposals to address the challenges toward implementing ahigh-precision and portable PSI system.
This work reviews the topic of rotation sensing with compact cold atom interferometers. A representative set of compact free-falling cold atom gyroscopes is considered because, in different respects, they establish a rotation-measurement reference for cold guided-atom technologies. This review first discusses enabling technologies relevant to a set of key functional building blocks of an atom chip-based compact inertial sensor with cold guided atoms. These functionalities concern the accurate and reproducible positioning of atoms to initiate a measurement cycle, the coherent momentum transfer to the atom wave packets, the suppression of propagation-induced decoherence due to potential roughness, on-chip detection, and vacuum dynamics because of its impact on sensor stability, which is due to the measurement dead time. Based on the existing enabling technologies, the design of an atom chip gyroscope with guided atoms is formalized using a design case that treats design elements such as guiding, fabrication, scale factor, rotation-rate sensitivity, spectral response, important noise sources, and sensor stability.