Error-correcting codes are used to partially or completely correct errors as much as possible, while ensuring high transmission speeds. Several Machine Learning (ML) models such as Logistic Regression and Decision tree have been applied to correct transmission errors. Among the most powerful ML techniques are aggregation methods which have yielded to excellent results in many areas of research. It is this excellence that has prompted us to consider their application for the hard decoding problem. In this sense, we have successfully designed, tested and validated our proposed EL-BoostDec decoder (hard decision decoder based on Ensemble Learning - Boosting technique) which is based on computing of the syndrome of the received word and on using Ensemble Learning techniques to find the corresponding corrigible error. The obtained results with EL-BoostDec are very encouraging in terms of the binary error rate (BER) that it offers. Practically EL-BoostDec has succeed to correct 100% of errors that have weights less than or equal to the correction capacity of studied codes. The comparison of EL-BoostDec with many competitors proves its power. A study of parameters which impact on EL-BoostDec performances has been established to obtain a good BER with minimum run time complexity.
Error-correcting codes are used to partially or completely correct errors as much as possible, while ensuring high transmission speeds. Several Machine Learning (ML) models such as Logistic Regression and Decision tree have been applied to correct transmission errors. Among the most powerful ML techniques are aggregation methods which have yielded to excellent results in many areas of research. It is this excellence that has prompted us to consider their application for the hard decoding problem. In this sense, we have successfully designed, tested and validated our proposed EL-BoostDec decoder (hard decision decoder based on Ensemble Learning - Boosting technique) which is based on computing of the syndrome of the received word and on using Ensemble Learning techniques to find the corresponding corrigible error. The obtained results with EL-BoostDec are very encouraging in terms of the binary error rate (BER) that it offers. Practically EL-BoostDec has succeed to correct 100% of errors that have weights less than or equal to the correction capacity of studied codes. The comparison of EL-BoostDec with many competitors proves its power. A study of parameters which impact on EL-BoostDec performances has been established to obtain a good BER with minimum run time complexity.
Facing the challenge of enormous data sets variety, several machine learning-based algorithms for prediction (e.g, Support vector machine, multi layer perceptron and logistic regression) have been highly proposed and used over the last years in many fields. Error correcting codes (ECCs) are extensively used in practice to protect data against damaged data storage systems and against random errors due to noise effects. In this paper, we will use machine learning methods, especially multi-class logistic regression combined with the famous syndrome decoding algorithm. The main idea behind our decoding method which we call logistic regression decoder (LRDec) is to use the efficient multi-class logistic regression models to find errors from syndromes in linear codes such as bose, ray-chaudhuri and hocquenghem (BCH), and the quadratic residue (QR). Obtained results of the proposed decoder have a significant benefit in terms of bit error rate (BER) for random binary codes. The comparison of our decoder with many competitors proves its power. The proposed decoder has reached a success percentage of 100% for correctable errors in the studied codes.
Error-correcting codes improve the reliability of data exchanged between transmitters and receivers; achieving efficient and fast decoding is a major challenge. In this work, we propose an efficient, fast, and high-performing decoder named FastSyndISD. The first version of the proposed decoder uses hashing techniques to quickly find the information set that allows for error correction directly from the syndrome of the received word. Hashing information sets significantly reduce space complexity, instead of all correctable errors, compared to HSDec, LRDec, and EL-BoostDec. The second version utilizes a machine learning model (decision tree) to quickly find the information set that enables error correction directly from the syndrome of the received word. This second version does not require storing a hash table, since the information set is determined by a decision tree classifier model. The performance of the proposed decoder FastSyndISD is very encouraging regarding its bit error rate (BER). Indeed, it succeeds in correcting all errors whose weights are equal to or less than the correction capacity of the analyzed codes. Furthermore, a comparison with various other decoders highlights its effectiveness. A detailed study of its space complexity, its time complexity, and the factors influencing its performance has also been conducted, aiming to achieve an optimal BER while reducing computational time and memory usage. This comparison proves the significant success of the proposed decoder.
Topological quantum error-correcting codes are a promising candidate for building fault-tolerant quantum computers. Decoding topological codes optimally, however, is known to be a computationally hard problem. Various decoders have been proposed that achieve approximately optimal error thresholds. Due to practical constraints, it is not known if there exists an obvious choice for a decoder. In this paper, we introduce a framework which can combine arbitrary decoders for any given code to significantly reduce the logical error rates. We rely on the crucial observation that two different decoding techniques, while possibly having similar logical error rates, can perform differently on the same error syndrome. We classify each error syndrome to the decoder which is more likely to decode it correctly using machine learning techniques. We apply our framework to an ensemble of minimum-weight perfect matching (MWPM) and hard-decision re-normalization-group decoders for the surface code in the depolarizing noise model. Our simulations show an improvement of 38.4%, 14.6%, and 7.1% over the pseudothreshold of MWPM in the instance of distance 5, 7, and 9 codes, respectively. Lastly, we discuss the advantages and limitations of our framework and applicability to other error-correcting codes. Our framework can provide a significant boost to error correction by combining the strengths of various decoders. In particular, it may allow for combining very fast decoders with moderate error-correcting capability to create a very fast ensemble decoder with high error-correcting capability.
Low-density parity-check (LDPC) codes have been successfully commercialized in communication systems due to their strong error correction capabilities and simple decoding process. However, the error-floor phenomenon of LDPC codes, in which the error rate stops decreasing rapidly at a certain level, presents challenges for achieving extremely low error rates and deploying LDPC codes in scenarios demanding ultra-high reliability. In this work, we propose training methods for neural min-sum (NMS) decoders to eliminate the error-floor effect. First, by leveraging the boosting learning technique of ensemble networks, we divide the decoding network into two neural decoders and train the post decoder to be specialized for uncorrected words that the first decoder fails to correct. Secondly, to address the vanishing gradient issue in training, we introduce a block-wise training schedule that locally trains a block of weights while retraining the preceding block. Lastly, we show that assigning different weights to unsatisfied check nodes effectively lowers the error-floor with a minimal number of weights. By applying these training methods to standard LDPC codes, we achieve the best error-floor performance compared to other decoding methods. The proposed NMS decoder, optimized solely through novel training methods without additional modules, can be integrated into existing LDPC decoders without incurring extra hardware costs. The source code is available at https://github.com/ghy1228/LDPC_Error_Floor .
Binary cyclic codes achieve good error correction performance and allow the implementation of very simpleencoder and decoder circuits. Among them, BCH codesrepresent a very important class of t-error correcting codes, with known structural properties and error correction capability. Decoding of binary cyclic codes is often accomplished through hard-decision decoders, although it is recognized that softdecision decoding algorithms can produce significant coding gain with respect to hard-decision techniques. Several approaches have been proposed to implement iterative soft-decision decoding of binary cyclic codes. We study the technique based on “extended parity-check matrices”, and show that such method is not suitable for high rates or long codes. We propose a new approach, based on “reduced parity-check matrices” and “spread parity-check matrices”, that can achieve better correction performance in many practical cases, without increasing the complexity.
The decoding of error-correcting codes (ECCs) is a critical aspect of communication systems, yet traditional decoding techniques can often be computationally demanding or ineffective for certain codes, necessitating innovative approaches. In this study, we introduce a hybrid approach that combines machine learning and automorphism techniques to optimize the decoding process. Specifically, we train multilayer perceptron (MLP) models to learn the mapping between error syndromes and their corresponding errors. While these models exhibit robust learning capabilities, their performance sometimes does not reach 100%. To mitigate this limitation, we exploit the automorphism group of the code—a set of structure-preserving transformations—to convert the errors that the MLP struggles to decode into ones it can process more effectively. We use a minimum number of p permutations, pre-calculating and storing all possible automorphisms to ensure computational efficiency. Our experimental results reveal that this hybrid approach substantially enhances the decoding performance of the MLP model, presenting a promising avenue for decoding ECCs. Importantly, this approach is not limited to MLP models and can be applied to any machine learning model with a learning score less than 100%, broadening its applicability and impact. By integrating machine learning with traditional algebraic coding theory, we propose a new paradigm that holds the potential to revolutionize the design of decoding systems, making them more efficient and effective.