Compared to other systems, diamond NV color centers have the advantage of being small in size and can be optically polarized and read out at room temperature. At the same time, its electron spin can interact with a variety of physical quantities, thus forming a multifunctional quantum sensor. At the same time, the excitation and detection of diamond NV color centers are usually not demanding on physical conditions, which makes them highly practical. Based on this, this paper discusses the new quantum precision measurement technology based on NV color centers for ultra-high voltage (UHV) DC measurements, and analyzes the influence of the complex environmental magnetic field on the measured components of the ODMR spectrum in the UHV converter station by the NV color-centered energy level structure and the jump mechanism and the diamond NV color-centered magnetic resonance technology for optical detection. The simulation results show that the surface receiving power of the scheme is 63% of the incident light power, which realizes the high precision measurement of the current and has high sensitivity and stability.
Compared to other systems, diamond NV color centers have the advantage of being small in size and can be optically polarized and read out at room temperature. At the same time, its electron spin can interact with a variety of physical quantities, thus forming a multifunctional quantum sensor. At the same time, the excitation and detection of diamond NV color centers are usually not demanding on physical conditions, which makes them highly practical. Based on this, this paper discusses the new quantum precision measurement technology based on NV color centers for ultra-high voltage (UHV) DC measurements, and analyzes the influence of the complex environmental magnetic field on the measured components of the ODMR spectrum in the UHV converter station by the NV color-centered energy level structure and the jump mechanism and the diamond NV color-centered magnetic resonance technology for optical detection. The simulation results show that the surface receiving power of the scheme is 63% of the incident light power, which realizes the high precision measurement of the current and has high sensitivity and stability.
The research focuses on the solid-state spin system of diamond NV (Negatively Charged Nitrogen Vacancy, NV) color centers, which exhibit excellent optical readout, polarization properties, and millisecond-scale coherent time. This makes it an important means to achieve quantum information processing and quantum precision measurement. Additionally, its ultrahigh sensitivity to magnetic fields provides a potential path for diamond’s high-precision current measurement. This paper investigates a reliable method in the field of direct current measurement using quantum sensing technology based on diamond NV color centers. It involves measuring the change in the optically detected magnetic resonance spectrum based on a fixed microwave frequency to achieve magnetic field measurement. Simultaneously, by utilizing the spatial distribution of magnetic sensor heads, it achieves current inversion. Finally, an experimental platform was constructed for validation. Preliminary results indicate that the linear fit error for direct current amplitude is less than 10^-7, confirming the feasibility of this technological approach and providing a potential application for diamond in measuring currents in power systems.
NV color center is a kin d of point defect in diamond, which can be used in high precision magnetic field measurement. In this paper, we discuss the feasibility of using NV ensemble as a magnetic sensor to measure current. Then, the relationship between current intensity, NV color center fluorescence intensity and partial resonance is modeled and simulated. Furthermore, we analyze the influence of sensor placement distance, laser, microwave power and diamond NV color center concentration to the performance of the sensor. Therefore, this paper lays a theoretical foundation for the design and manufacture of the current sensor based on diamond NV color centers.
Atomic scale defects in diamond are emerging as next-generation quantum sensors. One such defect is the nitrogen vacancy (NV) center which possesses artificial atom-like properties making it a strong contender for a room temperature solid state qubit. These spin defects are optically addressable by studying their optically detected magnetic resonance spectra (ODMR). The spin states can be initialized, controlled, and read out by a shining laser. The photoluminescence spectra contain information on the external magnetic field, electric field, temperature, etc. Thus, this type of multimodal sensor is exigent in various fields of research viz. chemistry, materials science, biology, and fundamental physics. In today's world where energy-related products are booming, deployment of quantum sensors can expedite the development. Based on existing works, this paper makes an attempt to identify the applications of color centers in diamond for energy sectors. We have highlighted the efficacy of quantum diamond sensors in the oil and gas industry, battery research, and photovoltaics. In addition, a summary of the structural and quantum properties of defects in diamond, synthesis of diamond, protocols for optical detection of spin states, different types of color centers, etc., is presented.
The existing high-level current ratio standard devices are all based on the principle of magnetic modulation-type comparators, with uncertainties reaching the order of 10^-6, making it difficult to further improve accuracy. This article addresses one of the main reasons limiting the improvement of accuracy in current comparators, which is the error caused by insufficient sensitivity of the Ampere balance device. Firstly, it initiates the design of a shield structure based on superconductors to reduce the impact of magnetic leakage. Secondly, it investigates a solid-state spin measurement method using diamond NV (Negatively Nitrogen Vacancy, NV) color centers. This method is based on a fixed microwave frequency and measures changes in the optically detected magnetic resonance spectrum to achieve magnetic field measurement. Through an analysis of the overall system error, theoretical limits are presented for a high-accuracy current comparator based on superconductors and solid-state quantum precision measurement.
The nitrogen-vacancy (NV) centers in diamond have the advantages of stable triaxial structure, ultra-long electron spin coherence time and simple optical readout at room temperature. A nitrogen atom in the diamond crystal replaces a carbon atom and a vacancy is generated at the adjacent position, forming a point defect in the C3v space group structure. Its ground state and excited state are both spin triplet states. It is the key to achieving efficient preparation of optical initial state and extracting NV color center’s information in the researches of highly sensitive sensing magnetic detection, temperature detection, biological imaging, quantum computing, etc. However, there was no systematic study on relevant parameters of laser for high-concentration NV color center’s samples in previous experimental studies. Based on a high concentration diamond NV ensemble, we use pulsed optical detection magnetic resonance (ODMR) technology to systematically study the relationship among laser initial polarization time, information reading time and laser power, and the influence of laser incident polarization angle on the accuracy of sensing information. The effects of various laser parameters on the NV1 peak of ODMR on the [111] axis of the NVs of diamond are also investigated. The contrast of ODMR increases firstly with a sigmoid function and then decreases with an e-exponential function as the information reading time increases. The incident polarization angle of the laser is sinusoidal, with a period of 90°. According to the above experimental results, we finally choose the appropriate experimental parameters at 45.8 W/cm2 (300 μs of polarization, 700 ns, reading time, laser incident angle is 220°) for ODMR test. Compared with previous experimental parameters (polarization time was 50 us, read the time of 3000 ns, laser incident angle was 250°), the experimental results show that the contrast of ODMR increases from 2.1% to 4.6%, and the typical magnetic sensitivity is improved from 21.6 nT/Hz1/2 to 5.6 nT/Hz1/2. The optimization of the optical control of NVs in solid diamond is realized. The above results provide an effective support for the detection of high-sensitivity manipulation sensing based on high-concentration NV ensemble.
Diamond quantum technologies based on color centers have rapidly emerged in the most recent years. The nitrogen-vacancy (NV) color center has attracted a particular interest, thanks to its outstanding spin properties and optical addressability. The NV center has been used to realize innovative multimode quantum-enhanced sensors that offer an unprecedented combination of high sensitivity and spatial resolution at room temperature. The technological progress and the widening of potential sensing applications have induced an increasing demand for performance advances of NV quantum sensors. Quantum control plays a key role in responding to this demand. This short review affords an overview on recent advances in quantum control-assisted quantum sensing and spectroscopy of magnetic fields.