Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Electronics Packaging Technology Conference (EPTC)

Thermally Annealed Tantalum-filled Vertical Superconducting Interconnects for Scalable Quantum Computing Systems

Harsh Mishra, Satish Bonam, Ullas Pandey, Shiv Govind Singh

Published Dec 5, 2023• 5 citations
Publisher

Abstract

To create a practical quantum computer, one must produce and incorporate around one million qubits. The greatest hurdle lies in finding a technology that allows for precise control over two-level quantum systems while enabling mass production. While achieving a high quantity of qubits is crucial, the most critical factor is qubit quality, which is measured by the number of gate operations a qubit can perform during its coherence time (also known as its lifetime). Unfortunately, qubits are susceptible to environmental disturbances, leading to the degradation of their quantum states over time. To sustain the computation process, a minimum threshold for quantum error correction is required, which is approximately 1000 times the qubit time. While researchers have managed to develop high-quality qubits, they have encountered limitations in terms of number of qubits. The methodology to address this challenge is through scalability using 2D technology at the expense of larger chip sizes, increased complexity, and subsequently, a potential compromise in qubit quality. Hence, to overcome this issue we have to look for vertical interconnects for large-scale qubit integration. Interconnects are not new they have already been used in the semiconductor industry. However, superconducting qubit is only facilitated at cryogenic temperature hence the materials that are traditionally used for electrical conductivity, like Cu and tungsten (w) are not superconducting in nature. Therefore, in this paper, we have analyzed the vertical superconducting interconnects filled with different superconducting materials using the time-dependent Ginzburg-landau equation and observed how the temperature-dependent London penetration depth results in an increase in cooper pair density or superconducting electron density.

DOI
10.1109/eptc59621.2023.10457669

Related papers

Superconducting Qubits: An Evaluation of Architectures, Noise Sources, and Quantum Error Correction Strategies

Modou Njie

Superconducting qubits are a leading platform for quantum computation, yet decoherence and scalability challenges continue to limit progress toward fault-tolerant systems. This review synthesizes research on architectures, noise sources, and error correction to clarify performance trade-offs and guide development. The transition from Transmon to Fluxonium has dramatically improved qubit performance, achieving millisecond-scale coherence times. However, this success reveals a fundamental limit of coherence now being primarily restricted by the physical properties of the materials, specifically dielectric losses occurring at the Josephson junction leads and within the surrounding materials. As overcoming these material limits becomes increasingly difficult, system-level engineering determines whether high-coherence qubits can scale.Scaling quantum systems is difficult because current cooling and control systems create too much heat and this forces a shift to integrated digital superconducting circuits and cryogenic light-based links. While these hardware challenges restrict scaling, experiments in error correction show that logical qubits can already outperform physical ones. For example, a distance-7 surface code improved logical qubit lifetime by 2.4×. Achieving practical fault tolerance, however, requires moving beyond simple error models. Future systems must combine techniques like Dynamical Decoupling and Machine Learning-based Optimal Control with dynamic classical control capable of handling complex, correlated faults such as Multi-Bit Burst Errors. Progress in materials, cryogenic system integration for control, and adaptive error management must advance together to realize scalable, high-fidelity quantum hardware.

•Mar 12, 2026•0 citations

Novel Wafer-Level Ta-Ta Direct Thermocompression Bonding for 3D Integration of Superconducting Interconnects for Scalable Quantum Computing System

Harsh Mishra, Satish Bonam, Vinit Kumar +1 more

As quantum computing evolves from small-scale qubit systems to more complex large-scale processors, the demand for individual qubit control and scalability will lead to the use of 3D integration and packaging technologies. Although advances in 3D integration in traditional CMOS technology are notable at room temperature, its potential in cryogenic environments, especially in quantum computing, remains largely unexplored. Superconducting qubit technology demands improvements in qubit relaxation and coherence time. Tantalum (Ta), renowned for its minimal loss, remarkable coherence time and superior stability, emerges as a promising candidate for superconducting materials. This study presents a novel approach by utilizing Ta-Ta thermo-compression bonding to create superconducting joints between wafers for vertical integration for the first time. A successful bonding temperature (500 °C) and pressure (0.3 MPa) results in the emergence of$\alpha $-tantalum, which improves the coherence time significantly as reported earlier. The shear strength test shows a bond strength of 200 MPa which is a clear indication of a good bond between the two layers. Hence, we demonstrate the feasibility of achieving 3D integration of superconducting chips using this approach, thus opening doors for inventive quantum computing architectures.

IEEE Electron Device Letters•Sep 2, 2024•3 citations

High-Density Qubit Wiring: Pin-Chip Bonding for Fully Vertical Interconnects

M. Mariantoni, A.V. Bardysheva

Large-scale quantum computers with more than $10^5$ qubits will likely be built within the next decade. Trapped ions, semiconductor devices, and superconducting qubits among other physical implementations are still confined in the realm of medium-scale quantum integration ($\sim 100$ qubits); however, they show promise toward large-scale quantum integration. Building large-scale quantum processing units will require truly scalable control and measurement classical coprocessors as well as suitable wiring methods. In this blue paper, we introduce a fully vertical interconnect that will make it possible to address $\sim 10^5$ superconducting qubits fabricated on a single silicon or sapphire chip: Pin-chip bonding. This method permits signal transmission from DC to $\sim 10$ GHz, both at room temperature and at cryogenic temperatures down to $\sim 10$ mK. At temperatures below $\sim 1$ K, the on-chip wiring contact resistance is close to zero and all signal lines are in the superconducting state. High-density wiring is achieved by means of a fully vertical interconnect that interfaces the qubit array with a network of rectangular coaxial ribbon cables. Pin-chip bonding is fully compatible with classical high-density test board applications as well as with other qubit implementations.

arXiv:1810.08580•Oct 19, 2018•5 citations

Superconducting Qubits

Stefano Poletto, Angela Q. Chen

Abstract Superconducting qubits are multilevel micro-fabricated artificial atoms based on superconducting materials. They are mainly operated in the low microwave frequency range (2–8 GHz) and require to be cooled below 20 mK to maintain quantum coherence. They enable precise engineering of transition frequencies and coupling strengths, facilitating advancements in quantum information processing and light-matter interactions. The field has evolved from early devices, characterized by short coherence times, to modern architectures with improved noise resilience, scalability, and fidelity. Better performances have been achieved through innovations in materials, fabrication, control electronics, and circuit design, enabling qubits with millisecond coherence times and gate fidelities exceeding 99.9%. However, challenges remain in mitigating two-level system defects, scaling devices, and addressing the cryogenic and infrastructure needs of larger quantum processing units. Current research focuses on modular and scalable architectures, error correction, and application. The field’s progress highlights the potential for superconducting qubits to drive advancements in quantum computation.

Springer eBooks•Dec 1, 2025•0 citations

Scalable Cryoelectronics for Superconducting Qubit Control and Readout

Meraj Ahmad, Christos Giagkoulovits, Sergey Danilin +2 more

Quantum computing promises an exponentially higher computational power than classical computers; although all the building blocks have become available, certain constraints still prevent quantum advantage. The fundamental challenge in building a practical quantum computer is integrating thousands of highly coherent qubits with the control and readout electronics. The need for a high‐coherence qubit drives the effort for quantum error correction algorithms to create fault‐tolerant quantum systems. Error correction becomes tangible in a quantum processor only in large numbers of qubits. Thus, the other challenge is reducing the number of physical interconnects (coaxial lines) between the quantum–classical interface and bulky room‐temperature electronics. To interface thousands of qubits, interconnects can be reduced by bringing the control and readout electronics near the quantum processor. Cryogenic complementary metal–oxide–semiconductor (CMOS) technology has been an ideal candidate for this purpose. Integrated control and readout at cryogenic temperatures require low power dissipation circuit designs and techniques such as frequency‐division multiplexing (FDM) due to the finite cooling power of a dilution refrigerator. Herein, an overview of each building block in a superconducting quantum computer is provided, focusing on scalability. Furthermore, this article is concluded with an outlook discussing current challenges and future directions for the scalable superconducting control and readout.

Advanced Intelligent Systems•May 26, 2022•16 citations

Materials in superconducting quantum circuits

Kanglin Xiong, Jiagui Feng, Yarui Zheng +5 more

Superconducting quantum circuits (SQCs), composed of superconducting capacitors, inductances, Josephson junctions, and transmission lines, exhibit macroscopic quantum effects at ultra-low temperatures. Due to the extremely low dissipation of superconductors, an important application of SQCs is superconducting qubits with long coherence time. Quantum computing based on superconducting qubits is a leading physical realization method of quantum computing, which is theoretically capable of accelerating many computational problems including quantum simulation, database searching, and optimization. In the long run, to use the power of quantum computing to its full extent, universal quantum computers should be constructed with quantum error correction. In the short term, one of the most pressing targets of the superconducting quantum computing community is to demonstrate quantum advantage using noisy intermediate-scale quantum chips. Both goals rely on the increasing of the number of coupled qubits in a quantum circuit and the quality of these qubits, which dictate the breadth and the depth of a problem it can solve, respectively. The fabrication of SQCs has adopted a few manufacturing processes from conventional integrated circuits. Quantum chips containing multiple superconducting qubits can be made and packaged on a large scale. “Quantum supremacy” has been demonstrated on a quantum chip with fifty-three qubits fabricated using the flip-chip bonding technology. However, to demonstrate quantum advantage, the quality and quantity of qubits need to increase simultaneously. Dissipative channels emerge in circuit design, material preparation, chip fabrication, and working environment, limiting the lifetime of superconducting qubits. For quantum chips with tens to hundreds of qubits, the integration will also introduce extra processing steps which may degrade the qubits, and unwanted coupling to loss channels. Most of these channels are microscopically related to materials constructing the quantum chips, chip surfaces, and material interfaces. Thus, it is important to investigate the material growth and device fabrication of SQCs, and to understand the material related loss mechanisms. This review paper investigates the material related topics in superconducting quantum circuits pertinent to the quantum computing application from a comprehensive perspective. The history of SQCs is briefly mentioned, followed by the peculiar characteristics as an engineerable quantum system, and a roadmap to quantum advantage and universal quantum computing in the next a few years. Technically, the superconducting quantum computer is compared to a Schrodinger’s cat, and can be boiled down into three parts, i.e., quantum chips, the environment, and the operating system, corresponding to the cat, the box, and the observer, respectively. The material related decoherence channels of the SQCs can be sorted into four categories; each will be discussed in details. To fabricate SQCs with minimal loss, the processing technologies are elaborated, including qubit design, material selection, surface treatments, film growth, and Josephson junction, etc. Though there are general guidelines that amorphous materials should be avoided and processing induced damage should be minimized, more is to be investigated due to the emerging of new materials and new fabrication methods. The last part presents the potential application of the superconducting quantum computer and its current state of play. SQC for quantum computing is a multi-discipline research topic, demanding joint efforts from different scientific and technical areas. Materials science and device processing will play important roles along the way to quantum practicality.

Chinese Science Bulletin (Chinese Version)•Jul 20, 2021•9 citations
To create a practical quantum computer, one must produce and incorporate around one million qubits. The greatest hurdle lies in finding a technology that allows for precise control over two-level quantum systems while enabling mass production. While achieving a high quantity of qubits is crucial, the most critical factor is qubit quality, which is measured by the number of gate operations a qubit can perform during its coherence time (also known as its lifetime). Unfortunately, qubits are susceptible to environmental disturbances, leading to the degradation of their quantum states over time. To sustain the computation process, a minimum threshold for quantum error correction is required, which is approximately 1000 times the qubit time. While researchers have managed to develop high-quality qubits, they have encountered limitations in terms of number of qubits. The methodology to address this challenge is through scalability using 2D technology at the expense of larger chip sizes, increased complexity, and subsequently, a potential compromise in qubit quality. Hence, to overcome this issue we have to look for vertical interconnects for large-scale qubit integration. Interconnects are not new they have already been used in the semiconductor industry. However, superconducting qubit is only facilitated at cryogenic temperature hence the materials that are traditionally used for electrical conductivity, like Cu and tungsten (w) are not superconducting in nature. Therefore, in this paper, we have analyzed the vertical superconducting interconnects filled with different superconducting materials using the time-dependent Ginzburg-landau equation and observed how the temperature-dependent London penetration depth results in an increase in cooper pair density or superconducting electron density.
Superconducting qubits are a leading platform for quantum computation, yet decoherence and scalability challenges continue to limit progress toward fault-tolerant systems. This review synthesizes research on architectures, noise sources, and error correction to clarify performance trade-offs and guide development. The transition from Transmon to Fluxonium has dramatically improved qubit performance, achieving millisecond-scale coherence times. However, this success reveals a fundamental limit of coherence now being primarily restricted by the physical properties of the materials, specifically dielectric losses occurring at the Josephson junction leads and within the surrounding materials. As overcoming these material limits becomes increasingly difficult, system-level engineering determines whether high-coherence qubits can scale.Scaling quantum systems is difficult because current cooling and control systems create too much heat and this forces a shift to integrated digital superconducting circuits and cryogenic light-based links. While these hardware challenges restrict scaling, experiments in error correction show that logical qubits can already outperform physical ones. For example, a distance-7 surface code improved logical qubit lifetime by 2.4×. Achieving practical fault tolerance, however, requires moving beyond simple error models. Future systems must combine techniques like Dynamical Decoupling and Machine Learning-based Optimal Control with dynamic classical control capable of handling complex, correlated faults such as Multi-Bit Burst Errors. Progress in materials, cryogenic system integration for control, and adaptive error management must advance together to realize scalable, high-fidelity quantum hardware.
As quantum computing evolves from small-scale qubit systems to more complex large-scale processors, the demand for individual qubit control and scalability will lead to the use of 3D integration and packaging technologies. Although advances in 3D integration in traditional CMOS technology are notable at room temperature, its potential in cryogenic environments, especially in quantum computing, remains largely unexplored. Superconducting qubit technology demands improvements in qubit relaxation and coherence time. Tantalum (Ta), renowned for its minimal loss, remarkable coherence time and superior stability, emerges as a promising candidate for superconducting materials. This study presents a novel approach by utilizing Ta-Ta thermo-compression bonding to create superconducting joints between wafers for vertical integration for the first time. A successful bonding temperature (500 °C) and pressure (0.3 MPa) results in the emergence of$\alpha $-tantalum, which improves the coherence time significantly as reported earlier. The shear strength test shows a bond strength of 200 MPa which is a clear indication of a good bond between the two layers. Hence, we demonstrate the feasibility of achieving 3D integration of superconducting chips using this approach, thus opening doors for inventive quantum computing architectures.
Large-scale quantum computers with more than 10510^5105 qubits will likely be built within the next decade. Trapped ions, semiconductor devices, and superconducting qubits among other physical implementations are still confined in the realm of medium-scale quantum integration (∼100\sim 100∼100 qubits); however, they show promise toward large-scale quantum integration. Building large-scale quantum processing units will require truly scalable control and measurement classical coprocessors as well as suitable wiring methods. In this blue paper, we introduce a fully vertical interconnect that will make it possible to address ∼105\sim 10^5∼105 superconducting qubits fabricated on a single silicon or sapphire chip: Pin-chip bonding. This method permits signal transmission from DC to ∼10\sim 10∼10 GHz, both at room temperature and at cryogenic temperatures down to ∼10\sim 10∼10 mK. At temperatures below ∼1\sim 1∼1 K, the on-chip wiring contact resistance is close to zero and all signal lines are in the superconducting state. High-density wiring is achieved by means of a fully vertical interconnect that interfaces the qubit array with a network of rectangular coaxial ribbon cables. Pin-chip bonding is fully compatible with classical high-density test board applications as well as with other qubit implementations.
Abstract Superconducting qubits are multilevel micro-fabricated artificial atoms based on superconducting materials. They are mainly operated in the low microwave frequency range (2–8 GHz) and require to be cooled below 20 mK to maintain quantum coherence. They enable precise engineering of transition frequencies and coupling strengths, facilitating advancements in quantum information processing and light-matter interactions. The field has evolved from early devices, characterized by short coherence times, to modern architectures with improved noise resilience, scalability, and fidelity. Better performances have been achieved through innovations in materials, fabrication, control electronics, and circuit design, enabling qubits with millisecond coherence times and gate fidelities exceeding 99.9%. However, challenges remain in mitigating two-level system defects, scaling devices, and addressing the cryogenic and infrastructure needs of larger quantum processing units. Current research focuses on modular and scalable architectures, error correction, and application. The field’s progress highlights the potential for superconducting qubits to drive advancements in quantum computation.
Quantum computing promises an exponentially higher computational power than classical computers; although all the building blocks have become available, certain constraints still prevent quantum advantage. The fundamental challenge in building a practical quantum computer is integrating thousands of highly coherent qubits with the control and readout electronics. The need for a high‐coherence qubit drives the effort for quantum error correction algorithms to create fault‐tolerant quantum systems. Error correction becomes tangible in a quantum processor only in large numbers of qubits. Thus, the other challenge is reducing the number of physical interconnects (coaxial lines) between the quantum–classical interface and bulky room‐temperature electronics. To interface thousands of qubits, interconnects can be reduced by bringing the control and readout electronics near the quantum processor. Cryogenic complementary metal–oxide–semiconductor (CMOS) technology has been an ideal candidate for this purpose. Integrated control and readout at cryogenic temperatures require low power dissipation circuit designs and techniques such as frequency‐division multiplexing (FDM) due to the finite cooling power of a dilution refrigerator. Herein, an overview of each building block in a superconducting quantum computer is provided, focusing on scalability. Furthermore, this article is concluded with an outlook discussing current challenges and future directions for the scalable superconducting control and readout.
Superconducting quantum circuits (SQCs), composed of superconducting capacitors, inductances, Josephson junctions, and transmission lines, exhibit macroscopic quantum effects at ultra-low temperatures. Due to the extremely low dissipation of superconductors, an important application of SQCs is superconducting qubits with long coherence time. Quantum computing based on superconducting qubits is a leading physical realization method of quantum computing, which is theoretically capable of accelerating many computational problems including quantum simulation, database searching, and optimization. In the long run, to use the power of quantum computing to its full extent, universal quantum computers should be constructed with quantum error correction. In the short term, one of the most pressing targets of the superconducting quantum computing community is to demonstrate quantum advantage using noisy intermediate-scale quantum chips. Both goals rely on the increasing of the number of coupled qubits in a quantum circuit and the quality of these qubits, which dictate the breadth and the depth of a problem it can solve, respectively. The fabrication of SQCs has adopted a few manufacturing processes from conventional integrated circuits. Quantum chips containing multiple superconducting qubits can be made and packaged on a large scale. “Quantum supremacy” has been demonstrated on a quantum chip with fifty-three qubits fabricated using the flip-chip bonding technology. However, to demonstrate quantum advantage, the quality and quantity of qubits need to increase simultaneously. Dissipative channels emerge in circuit design, material preparation, chip fabrication, and working environment, limiting the lifetime of superconducting qubits. For quantum chips with tens to hundreds of qubits, the integration will also introduce extra processing steps which may degrade the qubits, and unwanted coupling to loss channels. Most of these channels are microscopically related to materials constructing the quantum chips, chip surfaces, and material interfaces. Thus, it is important to investigate the material growth and device fabrication of SQCs, and to understand the material related loss mechanisms. This review paper investigates the material related topics in superconducting quantum circuits pertinent to the quantum computing application from a comprehensive perspective. The history of SQCs is briefly mentioned, followed by the peculiar characteristics as an engineerable quantum system, and a roadmap to quantum advantage and universal quantum computing in the next a few years. Technically, the superconducting quantum computer is compared to a Schrodinger’s cat, and can be boiled down into three parts, i.e., quantum chips, the environment, and the operating system, corresponding to the cat, the box, and the observer, respectively. The material related decoherence channels of the SQCs can be sorted into four categories; each will be discussed in details. To fabricate SQCs with minimal loss, the processing technologies are elaborated, including qubit design, material selection, surface treatments, film growth, and Josephson junction, etc. Though there are general guidelines that amorphous materials should be avoided and processing induced damage should be minimized, more is to be investigated due to the emerging of new materials and new fabrication methods. The last part presents the potential application of the superconducting quantum computer and its current state of play. SQC for quantum computing is a multi-discipline research topic, demanding joint efforts from different scientific and technical areas. Materials science and device processing will play important roles along the way to quantum practicality.