Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Quantum Statistics

Andrew F. Rex, C.B.P. Finn

Published Feb 22, 2024• 0 citations
Publisher

Abstract

This chapter aims to develop the Boltzmann factor by considering a system attached to a reservoir, assuming that the system and reservoir were fixed in size but could exchange energy. When dealing with quantum statistics, it will be convenient to consider systems in which both particles and energy can be exchanged with the reservoir. An alternate derivation of the Stefan–Boltzmann law involves integrating the spectral energy density or Planck law over all wavelengths. The chapter presents a theoretical model for estimating the maximum temperature for a particular Bose–Einstein condensate (BEC). A BEC can exhibit unusual properties, such as quantized vortices. The vortices have been used to model the behavior of black holes. Another interesting effect observed is interference, attributed to the system’s wave-particle duality. For classical systems, there is no need to consider whether particles are fermions or bosons, because their wave functions are considered non-overlapping. Therefore, classical particles are described by a type of statistics, called Maxwell–Boltzmann (MB) statistics.

DOI
10.1201/9781003299479-13

Related papers

Fermi–Dirac and Bose–Einstein Statistics

P. J. Shepherd

This chapter begins with a derivation of the Gibbs grand canonical probability distribution. The section on systems of noninteractive particles considers a single particle in the gas and treats it as a system itself, in thermal equilibrium with the reservoir of temperature. An equation for expressing the coefficient a in the Boltzmann single-particle state probability distribution in terms of the chemical potential of the gas is derived using the concept of the grand canonical ensemble. The chapter then discusses the indistinguishability of identical particles by considering a system of two identical noninteracting particles. Wave function equations for two noninteracting bosons as well as for two noninteracting identical fermions are presented. The chapter explains the Fermi-Dirac and Bose-Einstein distributions, and shows how to find the entropy of a system of noninteracting fermions or bosons.

Wiley eBooks•Jan 10, 2013•0 citations

Quantum ideal gases: Fermi-Dirac and Bose-Einstein statistics

Mark E. Tuckerman

Abstract Chapter 11 presents a statistical mechanical treatment of the quantum ideal gases, i.e., the ideal Boltzmann, fermion, and boson gases. The discussion begins with the microscopic description and the solution of the eigenvalue problem for a quantum ideal gas. It is argued that calculating the partition function is most readily accomplished in the grand canonical ensemble using a second-quantized formulation. When the particles are distinguishable, the equation of state is identical to that of a classical ideal gas. For fermions and bosons, however, the problem of computing thermodynamic properties is significantly more complex and can only be solved exactly in certain limits. Away from these limits approximations are needed and are discussed in detail. The relevant distributions - the Fermi-Dirac and Bose-Einstein distributions are derived. The local density approximation of density functional theory is derived for the ideal electron gas. For the ideal boson gas, the phenomenon of Bose-Einstein condensation is discussed

Oxford University Press eBooks•Aug 1, 2023•0 citations

The Quantum Distribution Functions

Michael J. R. Hoch

In nature, two different classes of particles are found, called fermi particles, or fermions, and bose particles, or bosons, respectively. The MB statistics is therefore an approximation to the true particle statistics and is applicable only in situations when most states are empty with some states occupied by a single particle and very few states, in the case of bosons, occupied by more than one particle. At high temperatures, the chemical potential decreases and the distribution changes its form dramatically. In discussing the quantum distribution functions, the authors have for convenience chosen the lowest state to have energy zero. The quantum distribution functions derived in this chapter are extremely useful in many areas of physics whenever what are called degenerate Fermi or Bose fluids are considered.

CRC Press eBooks•Mar 30, 2021•0 citations

Quantum Statistics and Bose-Einstein Condensation

Biman Bagchi

Overview Classical Statistical Mechanics (CSM) ignores the quantum nature of particles. This introduces three errors in the calculation of the partition function. First is the assumption of distinguishability of individual particles not possible in the microscopic world. Second, CSM neglects the discrete nature of system’s energy levels. Third, CSM fails to account for the spin of the particles which divides all particles into two types: boson and fermion, each following its own law of statistical distribution among energy levels. While CSM is impressively successful in describing observed properties of many naturally occurring large scale phenomena (particularly in liquids and biological systems), it fails to describe many phenomena where quantum nature of particles and quantum statistics play important role in determining properties such as electrical and thermal conductivity (particularly in solid materials) and superfluidity in liquid helium. It is not just at low temperatures where quantum nature is important, but also when the particle is intrinsically quantum, such as an electron. Quantum Statistical Mechanics (QSM) is also needed to understand biochemical reactions, like enzyme kinetics and optical properties of DNA. In this chapter, we discuss elementary aspects of quantum Statistical Mechanics, with detailed treatment of ideal Bose gas, leading to Bose-Einstein condensation.

CRC Press eBooks•Jul 6, 2018•0 citations

The non-interacting Bose gas

C. J. Pethick, H. Smith

The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∈/ k , where Δ∈ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermo dynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced, and from this we determine the density profile and the velocity distribution of particles. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. The final two sections are devoted to effects not captured by the simplest version of the semi-classical approximation: corrections to the transition temperature due to a finite particle number (Sec. 2.5), and thermodynamic properties of gases in lower dimensions (Sec. 2.6).

Cambridge University Press eBooks•Nov 29, 2001•0 citations

The non-interacting Bose gas

C. J. Pethick, H. Smith

The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∊/ k , where Δ∊ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest-energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermodynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced. From this we obtain the density profile and the velocity distribution of particles, and use these to determine the shape of an anisotropic cloud after free expansion. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. Finally, Sec. 2.5 treats corrections to the transition temperature due to a finite particle number.

Cambridge University Press eBooks•Sep 11, 2008•1 citation
This chapter aims to develop the Boltzmann factor by considering a system attached to a reservoir, assuming that the system and reservoir were fixed in size but could exchange energy. When dealing with quantum statistics, it will be convenient to consider systems in which both particles and energy can be exchanged with the reservoir. An alternate derivation of the Stefan–Boltzmann law involves integrating the spectral energy density or Planck law over all wavelengths. The chapter presents a theoretical model for estimating the maximum temperature for a particular Bose–Einstein condensate (BEC). A BEC can exhibit unusual properties, such as quantized vortices. The vortices have been used to model the behavior of black holes. Another interesting effect observed is interference, attributed to the system’s wave-particle duality. For classical systems, there is no need to consider whether particles are fermions or bosons, because their wave functions are considered non-overlapping. Therefore, classical particles are described by a type of statistics, called Maxwell–Boltzmann (MB) statistics.
This chapter begins with a derivation of the Gibbs grand canonical probability distribution. The section on systems of noninteractive particles considers a single particle in the gas and treats it as a system itself, in thermal equilibrium with the reservoir of temperature. An equation for expressing the coefficient a in the Boltzmann single-particle state probability distribution in terms of the chemical potential of the gas is derived using the concept of the grand canonical ensemble. The chapter then discusses the indistinguishability of identical particles by considering a system of two identical noninteracting particles. Wave function equations for two noninteracting bosons as well as for two noninteracting identical fermions are presented. The chapter explains the Fermi-Dirac and Bose-Einstein distributions, and shows how to find the entropy of a system of noninteracting fermions or bosons.
Abstract Chapter 11 presents a statistical mechanical treatment of the quantum ideal gases, i.e., the ideal Boltzmann, fermion, and boson gases. The discussion begins with the microscopic description and the solution of the eigenvalue problem for a quantum ideal gas. It is argued that calculating the partition function is most readily accomplished in the grand canonical ensemble using a second-quantized formulation. When the particles are distinguishable, the equation of state is identical to that of a classical ideal gas. For fermions and bosons, however, the problem of computing thermodynamic properties is significantly more complex and can only be solved exactly in certain limits. Away from these limits approximations are needed and are discussed in detail. The relevant distributions - the Fermi-Dirac and Bose-Einstein distributions are derived. The local density approximation of density functional theory is derived for the ideal electron gas. For the ideal boson gas, the phenomenon of Bose-Einstein condensation is discussed
In nature, two different classes of particles are found, called fermi particles, or fermions, and bose particles, or bosons, respectively. The MB statistics is therefore an approximation to the true particle statistics and is applicable only in situations when most states are empty with some states occupied by a single particle and very few states, in the case of bosons, occupied by more than one particle. At high temperatures, the chemical potential decreases and the distribution changes its form dramatically. In discussing the quantum distribution functions, the authors have for convenience chosen the lowest state to have energy zero. The quantum distribution functions derived in this chapter are extremely useful in many areas of physics whenever what are called degenerate Fermi or Bose fluids are considered.
Overview Classical Statistical Mechanics (CSM) ignores the quantum nature of particles. This introduces three errors in the calculation of the partition function. First is the assumption of distinguishability of individual particles not possible in the microscopic world. Second, CSM neglects the discrete nature of system’s energy levels. Third, CSM fails to account for the spin of the particles which divides all particles into two types: boson and fermion, each following its own law of statistical distribution among energy levels. While CSM is impressively successful in describing observed properties of many naturally occurring large scale phenomena (particularly in liquids and biological systems), it fails to describe many phenomena where quantum nature of particles and quantum statistics play important role in determining properties such as electrical and thermal conductivity (particularly in solid materials) and superfluidity in liquid helium. It is not just at low temperatures where quantum nature is important, but also when the particle is intrinsically quantum, such as an electron. Quantum Statistical Mechanics (QSM) is also needed to understand biochemical reactions, like enzyme kinetics and optical properties of DNA. In this chapter, we discuss elementary aspects of quantum Statistical Mechanics, with detailed treatment of ideal Bose gas, leading to Bose-Einstein condensation.
The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∈/ k , where Δ∈ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermo dynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced, and from this we determine the density profile and the velocity distribution of particles. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. The final two sections are devoted to effects not captured by the simplest version of the semi-classical approximation: corrections to the transition temperature due to a finite particle number (Sec. 2.5), and thermodynamic properties of gases in lower dimensions (Sec. 2.6).
The topic of Bose–Einstein condensation in a uniform, non-interacting gas of bosons is treated in most textbooks on statistical mechanics. In the present chapter we discuss the properties of a non-interacting Bose gas in a trap. We shall calculate equilibrium properties of systems in a semi-classical approximation, in which the energy spectrum is treated as a continuum. For this approach to be valid the temperature must be large compared with Δ∊/ k , where Δ∊ denotes the separation between neighbouring energy levels. As is well known, at temperatures below the Bose–Einstein condensation temperature, the lowest-energy state is not properly accounted for if one simply replaces sums by integrals, and it must be included explicitly. The statistical distribution function is discussed in Sec. 2.1, as is the single-particle density of states, which is a key ingredient in the calculations of thermodynamic properties. Calculations of the transition temperature and the fraction of particles in the condensate are described in Sec. 2.2. In Sec. 2.3 the semi-classical distribution function is introduced. From this we obtain the density profile and the velocity distribution of particles, and use these to determine the shape of an anisotropic cloud after free expansion. Thermodynamic properties of Bose gases are calculated as functions of the temperature in Sec. 2.4. Finally, Sec. 2.5 treats corrections to the transition temperature due to a finite particle number.