Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Highlights in Science Engineering and Technology

Analysis of the Principle and State-of-art Facilities of Mobile Atom Interferometry Gravity

J. Chen

Published Dec 15, 2023• 2 citations
Publisher

Abstract

With over 20 years of development, atomic interferometry gravimeters have distinguished themselves in gravity measurements by their high precision and sensitivity. To cater to the demands of field absolute gravity measurements for marine and aerial gravity field measurements, resource exploration, inertial navigation, and positioning, the miniaturization, mobility, and engineering of atomic interferometry gravimeters have become crucial areas of development. On this basis, this article elucidates the principles of atomic interferometry gravimeters, encompassing various laser cooling techniques, magneto-optical traps, and Raman light interference. As a matter of fact, it provides an overview of the principles and achieved precision benchmarks of portable, vehicular, airborne, and shipborne atomic interferometry gravimeters. Additionally, it analyzes the experimental content and results of maritime, terrestrial, and aerial experiments based on portable atomic interferometry gravimeters. The limitations of portable atomic interferometry gravimeters are discussed, along with an exploration of their application prospects. Overall, these results shed light on guiding further exploration of mobile atom interferometry gravity.

DOI
10.54097/qdmsvd27

Related papers

Advances in Portable Atom Interferometry-Based Gravity Sensing

Jamie Vovrosh, Andrei Dragomir, Ben Stray +1 more

Gravity sensing is a valuable technique used for several applications, including fundamental physics, civil engineering, metrology, geology, and resource exploration. While classical gravimeters have proven useful, they face limitations, such as mechanical wear on the test masses, resulting in drift, and limited measurement speeds, hindering their use for long-term monitoring, as well as the need to average out microseismic vibrations, limiting their speed of data acquisition. Emerging sensors based on atom interferometry for gravity measurements could offer promising solutions to these limitations, and are currently advancing towards portable devices for real-world applications. This article provides a brief state-of-the-art review of portable atom interferometry-based quantum sensors and provides a perspective on routes towards improved sensors.

Sensors•Sep 4, 2023•15 citations

Compact cold atom gravimeters and precise gravity measurement

Bo-Nan Jiang, Jin-Bao Long, Chenyang Li +2 more

Atomic gravimetry measures the gravitional acceleration of an ensemble of identical neutral atoms through the atom interferometry based on Raman two-photon transition, where the Raman lasers are used as “optical ruler" and the identical neutral atoms play the role of test mass and quantum storage of gravity field information. As the novel gravimetry system suffers no mechanical wear and works at a higher repetition rate, atom gravimetry can reach a much better short-term sensitivity than the classical falling-corner-cube counterpart, and the accuracy is reasonably well. Since the very first in-laboratory device built over 30 years ago, atomic gravimetry has matured to a versatile tool that offers both precise and accurate absolute gravity measurement to fundamental research and metrology, such as testing the weak equivalence principle or linking the mass and weight of the test mass in Watt (Kibble) balance. As the current rapid development of compact cold-atom gravimeters, atomic gravimetry is moving out of the laboratory to be used as a quantum enhancement of classical devices in dynamical measurement, such as geophysics survey, inertial navigation and space mission. We review the roadmap for the development of cold-atom absolute gravimetry, highlight recent advances in the dynamical measurement using compact cold atom gravimeters and discuss the associated technological challenges. In the future, with the maturity of its application in dynamical measurement or civil engineering and the innovation in atom interferometry theory, atomic gravimetry could play a more and more important role in our life.

Zhongguo kexue. Wulixue Lixue Tianwenxue•May 27, 2021•1 citation

Movable precision gravimeters based on cold atom interferometry*

Jiong-Yang Zhang, Lele Chen, Yuan Sheng Cheng +5 more

High precision atom interferometers have shown attractive prospects in laboratory for testing fundamental physics and inertial sensing. Efforts on applying this innovative technology to field applications are also being made intensively. As the manipulation of cold atoms and related matching technologies mature, inertial sensors based on atom interferometry can be adapted to various indoor or mobile platforms. A series of experiments have been conducted and high performance has been achieved. In this paper, we will introduce the principles, the key technologies, and the applications of atom interferometers, and mainly review the recent progress of movable atom gravimeters.

Chinese Physics B•Jul 28, 2020•16 citations

High Sensitivity Gravity Measurement with Cold Atom Interferometry

Zhong-Kun Hu, Xiao‐Chun Duan, Min-Kang Zhou +1 more

We report the work of exploring atom interferometry techniques to perform precision gravity measurements in our laboratory. The noise suppressions and related modulation experiments for the atom gravimeter will be presented in detail.

Conference on Lasers and Electro-Optics•Jan 1, 2014•1 citation

High-Sensitivity Absolute Atomic Gravimeter

Christine Guerlin, Tristan Farah, Anne Louchet-Chauvet +2 more

Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.

Research in Optical Sciences•Jan 1, 2012•0 citations

A Transportable Gravity Gradiometer Based on Atom Interferometry

Nan Yu, Robert J. Thompson, James R. Kellogg +3 more

A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.

•May 1, 2010•2 citations
With over 20 years of development, atomic interferometry gravimeters have distinguished themselves in gravity measurements by their high precision and sensitivity. To cater to the demands of field absolute gravity measurements for marine and aerial gravity field measurements, resource exploration, inertial navigation, and positioning, the miniaturization, mobility, and engineering of atomic interferometry gravimeters have become crucial areas of development. On this basis, this article elucidates the principles of atomic interferometry gravimeters, encompassing various laser cooling techniques, magneto-optical traps, and Raman light interference. As a matter of fact, it provides an overview of the principles and achieved precision benchmarks of portable, vehicular, airborne, and shipborne atomic interferometry gravimeters. Additionally, it analyzes the experimental content and results of maritime, terrestrial, and aerial experiments based on portable atomic interferometry gravimeters. The limitations of portable atomic interferometry gravimeters are discussed, along with an exploration of their application prospects. Overall, these results shed light on guiding further exploration of mobile atom interferometry gravity.
Gravity sensing is a valuable technique used for several applications, including fundamental physics, civil engineering, metrology, geology, and resource exploration. While classical gravimeters have proven useful, they face limitations, such as mechanical wear on the test masses, resulting in drift, and limited measurement speeds, hindering their use for long-term monitoring, as well as the need to average out microseismic vibrations, limiting their speed of data acquisition. Emerging sensors based on atom interferometry for gravity measurements could offer promising solutions to these limitations, and are currently advancing towards portable devices for real-world applications. This article provides a brief state-of-the-art review of portable atom interferometry-based quantum sensors and provides a perspective on routes towards improved sensors.
Atomic gravimetry measures the gravitional acceleration of an ensemble of identical neutral atoms through the atom interferometry based on Raman two-photon transition, where the Raman lasers are used as “optical ruler" and the identical neutral atoms play the role of test mass and quantum storage of gravity field information. As the novel gravimetry system suffers no mechanical wear and works at a higher repetition rate, atom gravimetry can reach a much better short-term sensitivity than the classical falling-corner-cube counterpart, and the accuracy is reasonably well. Since the very first in-laboratory device built over 30 years ago, atomic gravimetry has matured to a versatile tool that offers both precise and accurate absolute gravity measurement to fundamental research and metrology, such as testing the weak equivalence principle or linking the mass and weight of the test mass in Watt (Kibble) balance. As the current rapid development of compact cold-atom gravimeters, atomic gravimetry is moving out of the laboratory to be used as a quantum enhancement of classical devices in dynamical measurement, such as geophysics survey, inertial navigation and space mission. We review the roadmap for the development of cold-atom absolute gravimetry, highlight recent advances in the dynamical measurement using compact cold atom gravimeters and discuss the associated technological challenges. In the future, with the maturity of its application in dynamical measurement or civil engineering and the innovation in atom interferometry theory, atomic gravimetry could play a more and more important role in our life.
High precision atom interferometers have shown attractive prospects in laboratory for testing fundamental physics and inertial sensing. Efforts on applying this innovative technology to field applications are also being made intensively. As the manipulation of cold atoms and related matching technologies mature, inertial sensors based on atom interferometry can be adapted to various indoor or mobile platforms. A series of experiments have been conducted and high performance has been achieved. In this paper, we will introduce the principles, the key technologies, and the applications of atom interferometers, and mainly review the recent progress of movable atom gravimeters.
Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.
A transportable atom interferometer-based gravity gradiometer has been developed at JPL to carry out measurements of Earth's gravity field at ever finer spatial resolutions, and to facilitate high-resolution monitoring of temporal variations in the gravity field from ground- and flight-based platforms. Existing satellite-based gravity missions such as CHAMP and GRACE measure the gravity field via precise monitoring of the motion of the satellites; i.e. the satellites themselves function as test masses. JPL's quantum gravity gradiometer employs a quantum phase measurement technique, similar to that employed in atomic clocks, made possible by recent advances in laser cooling and manipulation of atoms. This measurement technique is based on atomwave interferometry, and individual laser-cooled atoms are used as drag-free test masses. The quantum gravity gradiometer employs two identical atom interferometers as precision accelerometers to measure the difference in gravitational acceleration between two points (Figure 1). By using the same lasers for the manipulation of atoms in both interferometers, the accelerometers have a common reference frame and non-inertial accelerations are effectively rejected as common mode noise in the differential measurement of the gravity gradient. As a result, the dual atom interferometer-based gravity gradiometer allows gravity measurements on a moving platform, while achieving the same long-term stability of the best atomic clocks. In the laboratory-based prototype (Figure 2), the cesium atoms used in each atom interferometer are initially collected and cooled in two separate magneto-optic traps (MOTs). Each MOT, consisting of three orthogonal pairs of counter-propagating laser beams centered on a quadrupole magnetic field, collects up to 10(exp 9) atoms. These atoms are then launched vertically as in an atom fountain by switching off the magnetic field and introducing a slight frequency shift between pairs of lasers to create a moving rest frame for the trapped atoms. While still in this moving-frame molasses, the laser frequencies are further detuned from the atomic resonance (while maintaining this relative frequency shift) to cool the atom cloud's temperature to 2 K or below, corresponding to an rms velocity of less than 2 cm/s. After launch, the cold atoms undergo further state and velocity selection to prepare for atom interferometry. The atom interferometers are then realized using laser-induced stimulated Raman transitions to perform the necessary manipulations of each atom, and the resulting interferometer phase is measured using laser-induced fluorescence for state-normalized detection. More than 20 laser beams with independent controls of frequency, phase, and intensity are required for this measurement sequence. This instrument can facilitate the study of Earth's gravitational field from surface and air vehicles, as well as from space by allowing gravity mapping from a low-cost, single spacecraft mission. In addition, the operation of atom interferometer-based instruments in space offers greater sensitivity than is possible in terrestrial instruments due to the much longer interrogation times available in the microgravity environment. A space-based quantum gravity gradiometer has the potential to achieve sensitivities similar to the GRACE mission at long spatial wavelengths, and will also have resolution similar to GOCE for measurement at shorter length scales.