Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP Advances

RF spectra induced by different polarized microwave

Shuhang You, Ming Hao Cai, Hao Zhang, Zhen Fei Song, Hongping Liu

Published Jan 1, 2024• 5 citations
Publisher

Abstract

Electric field measurement techniques based on Rydberg atoms have proven to have unique advantages in high sensitivity and have drawn wide attention in microwave electric field metrology and communication. The Rydberg states employed for microwave sensing are usually excited by two- or three-step laser irradiation. It leads to the Rydberg atoms being populated by some specific magnetic quantum number states determined by the laser polarization configurations, whose further coupling to another Rydberg state is also constrained by the microwave polarization. Based on a three-laser optical excitation, we demonstrate this effect on the microwave spectra of the 85Rb transitions 41F7/2 → 42D5/2 and 41F7/2 → 41G7/2 at various combining polarization configurations. It shows a strong polarization dependence on the microwave spectrum and then affects the sensitivity of Rydberg atom-based microwave field sensing. Advisable polarization schemes for higher sensitivity are suggested by the two types of transitions.

DOI
10.1063/5.0173545

Related papers

Microwave electric field sensing with Rydberg atoms

Daniel T. Stack, Paul D. Kunz, David H. Meyer +1 more

Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 19, 2016•3 citations

Atom-based sensing of microwave electric fields using highly excited atoms: mechanisms affecting sensitivity

James P. Shaffer, Harald Kübler, James Keaveney +5 more

We have shown that Rydberg states can be used for high-sensitivity, absolute sensing of microwave (MW) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Depending on the spectral resolution of the read-out, either the MW induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the MW electric field. Results using a Mach-Zehnder interferometer and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. In addition, we have also explored amplitude modulation and the displacement of a probe laser beam due to index of refraction changes in a prism shaped vapor cell. These latter methods were not able to achieve photon shot noise limited performance. Fundamental limits to the sensitivity of the Rydberg atom-based MW electric field sensing have been addressed, but it is important to clarify the differences between noise in different parts or subsystems of the sensor. Shot noise in the probe laser usually dominates the projection noise of the atoms participating in the measurement of the MW electric field because of the desire to operate at low effective Rydberg atom densities in order to avoid collisional dephasing and ionization.

Optical and Quantum Sensing and Precision Metrology II•Mar 1, 2019•9 citations

Influence of Laser Polarization on Rydberg Atom-Based Electric Field Measurement

Dongping Xiao, Ling Chen, Sheng Yan +3 more

Experimental studies on Rydberg-atom electrometry have shown that laser polarization configurations modulate the spectral characteristics of quantum effects, thereby affecting measurement performance. However, the underlying mechanism of polarization-mediated quantum state control, the dependence on multilaser polarization combinations, and quantitative characterization remain incomplete. In this work, we elucidate the intrinsic correlation between laser polarization and the electric dipole moment of specific quantum states, as well as the regulation mechanism of atomic transitions. Transition probabilities are derived to quantitatively characterize the polarization dependence. For a two-photon ladder-type three-level system, we establish an electromagnetically induced transparency (EIT) model incorporating laser polarization parameters. Simulations and statistical analyses reveal that polarization modulates Zeeman transition pathways, governing the EIT spectral amplitude. Furthermore, we investigate the influence of laser polarization on Rydberg Zeeman sublevels and uncover its role in modifying the Stark effect under external electric fields. Experimental EIT-Stark spectra for different magnetic quantum states$\vert m_{\!j}\vert $under varied polarization combinations verify the theoretical model. Quantitative measurements show that the EIT peak amplitude scales with the relative polarization angle between the two lasers. Based on this, an optimal dual-laser polarization matching scheme is proposed. Comparative tests demonstrate that, under the criterion of signal-to-noise ratio (SNR$\ge 2$), the reliable measurement range of the cohanded circular polarization combination is 87% broader than that of the counter-handed configuration. These results provide critical guidance for enhancing the performance of Rydberg-atom-based electrometry.

IEEE Sensors Journal•Aug 4, 2026•0 citations

Sensitivity Improvement and Determination of Rydberg Atom-Based Microwave Sensor

Minghao Cai, Zi-Shan Xu, Shuhang You +1 more

We present a theoretical and experimental investigation of the improvement and determination of the sensitivity of Rydberg atom-based microwave RF sensor. An optical Bloch equation has been set up based on the configuration that two-color cascading lasers exciting atom to highly Rydberg state and a microwave RF coupling this Rydberg state to its adjacent neighbor. The numerical simulation shows that the sensitivity of the atomic RF sensor is correlated with the amplitude strengths of the applied two lasers and the RF itself. It also depends on the frequency detuning of the coupling laser, which induces an asymmetrically optical splitting. The coupling laser frequency fixing at the shoulder of the stronger one is more favorable for a higher sensitivity. Accordingly, we perform an experimental demonstration for the optimization of all these parameters and the sensitivity is improved to 12.50(04) nVcm−1·Hz−1/2.

Photonics•Apr 10, 2022•85 citations

Sensitivity extension of atom-based amplitude-modulation microwave electrometry via high Rydberg states

Minghao Cai, Shuhang You, Shanshan Zhang +2 more

The Rydberg atom-based microwave electric field sensor has high sensitivity for weak RF-field detection. Selection of Rydberg states with larger electric dipole moment is beneficial to enhance the sensitivity, and we choose Rydberg states with its principal quantum number up to n ∼ 80. We study the probe laser transmission response to a microwave field for these chosen high Rydberg states at room temperature. It agrees well with theoretical simulation based on an optical Bloch equation with considered microwave-atom interaction and Doppler broadening effect. In our experiment, the microwave sensing sensitivity based on 85 Rb transition | 78 S 1 / 2 ⟩ → | 78 P 3 / 2 ⟩ arrives at 5.102(49) nV cm − 1 Hz − 1 / 2 at 1 kHz.

Applied Physics Letters•Apr 17, 2023•45 citations

Cavity-Enhanced Rydberg Atom Microwave Receiver

Bang Liu, Lihua Zhang, Qifeng Wang +11 more

Abstract Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity, which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.

arXiv:2404.06915•Chinese Physics Letters•Apr 7, 2025•32 citations
Electric field measurement techniques based on Rydberg atoms have proven to have unique advantages in high sensitivity and have drawn wide attention in microwave electric field metrology and communication. The Rydberg states employed for microwave sensing are usually excited by two- or three-step laser irradiation. It leads to the Rydberg atoms being populated by some specific magnetic quantum number states determined by the laser polarization configurations, whose further coupling to another Rydberg state is also constrained by the microwave polarization. Based on a three-laser optical excitation, we demonstrate this effect on the microwave spectra of the 85Rb transitions 41F7/2 → 42D5/2 and 41F7/2 → 41G7/2 at various combining polarization configurations. It shows a strong polarization dependence on the microwave spectrum and then affects the sensitivity of Rydberg atom-based microwave field sensing. Advisable polarization schemes for higher sensitivity are suggested by the two types of transitions.
Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.
We have shown that Rydberg states can be used for high-sensitivity, absolute sensing of microwave (MW) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Depending on the spectral resolution of the read-out, either the MW induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the MW electric field. Results using a Mach-Zehnder interferometer and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. In addition, we have also explored amplitude modulation and the displacement of a probe laser beam due to index of refraction changes in a prism shaped vapor cell. These latter methods were not able to achieve photon shot noise limited performance. Fundamental limits to the sensitivity of the Rydberg atom-based MW electric field sensing have been addressed, but it is important to clarify the differences between noise in different parts or subsystems of the sensor. Shot noise in the probe laser usually dominates the projection noise of the atoms participating in the measurement of the MW electric field because of the desire to operate at low effective Rydberg atom densities in order to avoid collisional dephasing and ionization.
Experimental studies on Rydberg-atom electrometry have shown that laser polarization configurations modulate the spectral characteristics of quantum effects, thereby affecting measurement performance. However, the underlying mechanism of polarization-mediated quantum state control, the dependence on multilaser polarization combinations, and quantitative characterization remain incomplete. In this work, we elucidate the intrinsic correlation between laser polarization and the electric dipole moment of specific quantum states, as well as the regulation mechanism of atomic transitions. Transition probabilities are derived to quantitatively characterize the polarization dependence. For a two-photon ladder-type three-level system, we establish an electromagnetically induced transparency (EIT) model incorporating laser polarization parameters. Simulations and statistical analyses reveal that polarization modulates Zeeman transition pathways, governing the EIT spectral amplitude. Furthermore, we investigate the influence of laser polarization on Rydberg Zeeman sublevels and uncover its role in modifying the Stark effect under external electric fields. Experimental EIT-Stark spectra for different magnetic quantum states$\vert m_{\!j}\vert undervariedpolarizationcombinationsverifythetheoreticalmodel.QuantitativemeasurementsshowthattheEITpeakamplitudescaleswiththerelativepolarizationanglebetweenthetwolasers.Basedonthis,anoptimaldual−laserpolarizationmatchingschemeisproposed.Comparativetestsdemonstratethat,underthecriterionofsignal−to−noiseratio(SNRunder varied polarization combinations verify the theoretical model. Quantitative measurements show that the EIT peak amplitude scales with the relative polarization angle between the two lasers. Based on this, an optimal dual-laser polarization matching scheme is proposed. Comparative tests demonstrate that, under the criterion of signal-to-noise ratio (SNRundervariedpolarizationcombinationsverifythetheoreticalmodel.QuantitativemeasurementsshowthattheEITpeakamplitudescaleswiththerelativepolarizationanglebetweenthetwolasers.Basedonthis,anoptimaldual−laserpolarizationmatchingschemeisproposed.Comparativetestsdemonstratethat,underthecriterionofsignal−to−noiseratio(SNR\ge 2$), the reliable measurement range of the cohanded circular polarization combination is 87% broader than that of the counter-handed configuration. These results provide critical guidance for enhancing the performance of Rydberg-atom-based electrometry.
We present a theoretical and experimental investigation of the improvement and determination of the sensitivity of Rydberg atom-based microwave RF sensor. An optical Bloch equation has been set up based on the configuration that two-color cascading lasers exciting atom to highly Rydberg state and a microwave RF coupling this Rydberg state to its adjacent neighbor. The numerical simulation shows that the sensitivity of the atomic RF sensor is correlated with the amplitude strengths of the applied two lasers and the RF itself. It also depends on the frequency detuning of the coupling laser, which induces an asymmetrically optical splitting. The coupling laser frequency fixing at the shoulder of the stronger one is more favorable for a higher sensitivity. Accordingly, we perform an experimental demonstration for the optimization of all these parameters and the sensitivity is improved to 12.50(04) nVcm−1·Hz−1/2.
The Rydberg atom-based microwave electric field sensor has high sensitivity for weak RF-field detection. Selection of Rydberg states with larger electric dipole moment is beneficial to enhance the sensitivity, and we choose Rydberg states with its principal quantum number up to n ∼ 80. We study the probe laser transmission response to a microwave field for these chosen high Rydberg states at room temperature. It agrees well with theoretical simulation based on an optical Bloch equation with considered microwave-atom interaction and Doppler broadening effect. In our experiment, the microwave sensing sensitivity based on 85 Rb transition | 78 S 1 / 2 ⟩ → | 78 P 3 / 2 ⟩ arrives at 5.102(49) nV cm − 1 Hz − 1 / 2 at 1 kHz.
Abstract Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity, which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.