In a popular integration process for quantum information technologies, localization microscopy of quantum emitters guides lithographic placement of photonic structures. However, a complex coupling of microscopy and lithography errors degrades registration accuracy, severely limiting device performance and process yield. We introduce a methodology to solve this widespread but poorly understood problem. A new foundation of traceable localization enables rapid characterization of lithographic standards and comprehensive calibration of cryogenic microscopes, revealing and correcting latent systematic effects. Of particular concern, we discover that scale factor deviation and complex optical distortion couple to dominate registration errors. These novel results parameterize a process model for integrating quantum dots and bullseye resonators, predicting higher yield by orders of magnitude, depending on the Purcell factor threshold as a quantum performance metric. Our foundational methodology is a key enabler of the lab-to-fab transition of quantum information technologies and has broader implications to cryogenic and correlative microscopy.
In a popular integration process for quantum information technologies, localization microscopy of quantum emitters guides lithographic placement of photonic structures. However, a complex coupling of microscopy and lithography errors degrades registration accuracy, severely limiting device performance and process yield. We introduce a methodology to solve this widespread but poorly understood problem. A new foundation of traceable localization enables rapid characterization of lithographic standards and comprehensive calibration of cryogenic microscopes, revealing and correcting latent systematic effects. Of particular concern, we discover that scale factor deviation and complex optical distortion couple to dominate registration errors. These novel results parameterize a process model for integrating quantum dots and bullseye resonators, predicting higher yield by orders of magnitude, depending on the Purcell factor threshold as a quantum performance metric. Our foundational methodology is a key enabler of the lab-to-fab transition of quantum information technologies and has broader implications to cryogenic and correlative microscopy.
Quantum photonic technologies greatly benefit from quantum light emitters with high brightness, indistinguishability, and reliable polarization characteristics. Achieving optimal performance relies on the accurate localization of emitters and their deterministic integration into tailored photonic structures with nanometer-scale accuracy. Although marker-based photoluminescence imaging techniques can achieve statistical fitting uncertainties below 10 nm, the ultimate integration yield is often limited by uncorrected systematic distortions in custom cryo-optical setups that compromise metrological accuracy. Here, we present an in situ calibration protocol that uses lithographically defined gold nanodisk arrays as references to calibrate optical distortions with a Zernike vector-field model. On held-out validation patterns beyond the calibration dataset, this correction reduces the residual systematic bias to 5.3 nm with a 2D scatter of 24.6 nm across the analyzed field of view. Furthermore, we demonstrate that applying this correction to the deterministic fabrication of circular mesa structures around semiconductor quantum dots reduces the variance in emission polarization by 49%, indicating improved registration accuracy. This calibration strategy offers a practical route to high-yield deterministic integration of quantum emitters into scalable quantum photonic circuits.
Abstract Deterministically integrating single solid‐state quantum emitters with photonic nanostructures serves as a key enabling resource in the context of photonic quantum technology. Due to the random spatial location of many widely‐used solid‐state quantum emitters, a number of positioning approaches for locating the quantum emitters before nanofabrication have been explored in the last decade. Here, the working principles of several nanoscale positioning methods and the most recent progress in this field, covering techniques including atomic force microscopy, scanning electron microscopy, confocal microscopy with in situ lithography, and wide‐field fluorescence imaging are reviewed. A selection of representative device demonstrations with high‐performance is presented, including high‐quality single‐photon sources, bright entangled‐photon pairs, strongly‐coupled cavity QED systems, and other emerging applications. The challenges in applying positioning techniques to different material systems and opportunities for using these approaches for realizing large‐scale quantum photonic devices are discussed.
Photonic quantum technologies require the integration of high-quality quantum light sources with programmable photonic circuitry to enable on-chip quantum information processing. Semiconductor quantum dots have emerged as a leading platform for quantum light generation, yet their monolithic integration with cryogenic-compatible, programmable photonic circuitry remains challenging. Here we demonstrate a programmable quantum photonic platform that enables simultaneous control of highly coherent quantum dot-based single photon emitters and reconfigurable optical elements at cryogenic temperatures. System-level integration enables individual electrical and optical addressing of active components on a single chip, allowing their concurrent operation while preserving coherent non-classical light emission. We demonstrate multiple quantum-photonic functionalities, including pure single-photon generation, two-photon interference, and resonant transmission and reflection measurements of integrated emitters. These results mark a step from isolated quantum-optical devices towards programmable quantum-photonic hardware platforms capable of combining coherent quantum emitters with large-scale photonic functionality.
Color centers are optically active point defects in semiconductor materials, many of them carrying a spin degree of freedom that couples coherently to emitted photons. This makes them a leading candidate for building quantum computers, networks, and sensors, but realizing that promise depends on the interface between the emitter and light. Color centers must be integrated into nanophotonic structures, such as nanopillars that collect their emission efficiently and optical cavities that couple them to a single mode. This dissertation studies the physics of quantum emitters inside such structures along two complementary threads: the direct cryogenic spectroscopy of color centers integrated into silicon carbide nanostructures, and the study of the physics of many-body cavity quantum electrodynamics (CQED) through simulation on superconducting and trapped-ion quantum hardware. The first thread concerns the nitrogen-vacancy (NV) center in 4H silicon carbide integrated into nanopillars. We show that the sub-wavelength geometry of a nanopillar reshapes the local electromagnetic environment, granting optical access to transitions that selection rules forbid in bulk material: emission from the PL3 divacancy, nearly absent in planar devices, becomes pronounced in nanopillars through a polarization transformation of the excitation field, and the orientation-dependent collection of the pillar resolves the previously ambiguous NV4′ line, establishing nanophotonic integration as a symmetry-sensitive probe of defect structure. We then take up the complementary problem of quantifying how many emitters a device contains, adapting the number-and-brightness technique from fluorescence microscopy to solid-state emitters. This calibration-free method counts dense NV ensembles in silicon carbide nanopillars, a regime beyond the reach of existing optical techniques, and extracts their areal density and formation yield. The second thread turns to many-body cavity QED, in which placing N emitters in a common cavity enhances the light-matter coupling by √N and gives rise to collective effects that are central to strong-coupling applications yet difficult to achieve in solid-state devices based on defects. We realize one such effect on a superconducting circuit, demonstrating photon blockade, the conversion of a coherent drive into a stream of single photons, in a Tavis–Cummings system of N = 1, 2, 3 transmon qubits coupled to a common resonator. To study the open-system dynamics that govern these systems, we digitally simulate the dissipative Tavis–Cummings model on both a superconducting and a trapped-ion processor. Platform-specific compilation and error mitigation yield population dynamics in close agreement with exact solutions, providing a recipe for simulating cavity-emitter systems on contemporary quantum computers. Together, the two threads connect the fabrication and characterization of color-center devices to the many-body cavity-QED physics that will ultimately govern their performance.
Quantum technologies promise secure communication networks and powerful new forms of information processing, but building these systems at scale remains a major challenge. Diamond is an especially attractive material for quantum devices because it can host atomic-scale defects that emit single photons and store quantum information with exceptional stability. However, fabricating the optical structures needed to control light in diamond typically relies on slow, bespoke processes that are difficult to scale. In this work, we introduce a manufacturing approach that brings diamond quantum photonics closer to industrial production. Instead of sequentially defining each device by lithography written directly on diamond, we fabricate high-precision silicon masks using commercial semiconductor foundries and transfer them onto diamond via microtransfer printing. These masks define large arrays of nanoscale optical structures, shifting the most demanding pattern-definition steps away from the diamond substrate, improving uniformity, yield, and throughput. Using this method, we demonstrate hundreds of diamond "quantum microchiplets" with improved optical performance and controlled interaction with quantum emitters. The chiplet format allows defective devices to be replaced and enables integration with existing photonic and electronic circuits. Our results show that high-quality diamond quantum devices can be produced using scalable, foundry-compatible techniques. This approach provides a practical pathway toward large-scale quantum photonic systems and hybrid quantum-classical technologies built on established semiconductor manufacturing infrastructure.
Efficiently coupling single-photon emitters in the telecommunication C-band that are not deterministically positioned to photonic structures requires both spatial and spectral mapping. This study introduces the photoluminescence mapping of telecom C-band self-assembled quantum dots (QDs) by confocal laser scanning microscopy, a technique previously unexplored in this wavelength range which fulfills these two requirements. We consider the effects of distortions inherent to any imaging system but largely disregarded in prior works to derive accurate coordinates from photoluminescence maps. We obtain a position uncertainty below 11 nm for 10% of the QDs when assuming no distortions, highlighting the potential of the scanning approach. After distortion correction, we found that the previously determined positions are on average shifted by 428 nm from the corrected positions, demonstrating the necessity of this correction for accurate positioning. Then, through error propagation, the position uncertainty for 10% of the QDs increases to 110 nm.