Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Circuits & Systems II Express Briefs

True Random Number Generation Using Dark Noise Modulation of a Single-Photon Avalanche Diode

Md Sajal, Marc P. Dandin

Published Dec 28, 2023• 12 citations
Publisher

Abstract

This brief presents the application of perimeter-gated single-photon avalanche diodes (pg-SPADs) as true random number generators (TRNGs). Typical SPADs have been used as random number generators (RNGs) in photon-based or dark event-based configurations, and they utilize complex debiasing algorithms to increase their random bit efficiency (RBE). In contrast, we propose leveraging the dark count rate modulation property of pg-SPADs to enable true random number generation using simpler debiasing algorithms. Further, we demonstrate that perimeter gating may be used to maintain a constant dark count rate across a wide temperature range, conferring stability to the RNG in that range. A set of debiased random bits from a tested prototype chip was benchmarked against the National Institute of Standards and Technology (NIST) Statistical Test Suite (STS) with a success rate of 99.375%.

DOI
10.1109/tcsii.2023.3347735

Related papers

Bias Variation Compensation in Perimeter-Gated SPAD TRNGs

Md Sajal, Hunter Guthrie, Marc P. Dandin

Random number generators that utilize arrays of entropy source elements suffer from bias variation (BV). Despite the availability of efficient debiasing algorithms, optimized implementations of hardware friendly options depend on the bit bias in the raw bit streams and cannot accommodate a wide BV. In this work, we present a$64 \times 64$array of perimeter gated single photon avalanche diodes (pgSPADs), fabricated in a$0.35 \mu ~\mathrm{m}$standard CMOS technology, as a source of entropy to generate random binary strings with a BV compensation technique. By applying proper gate voltages based on the devices' native dark count rates, we demonstrate less than 1 % BV for a raw-bit generation rate of$2 \text{kHz} /$pixel at room temperature. The raw bits were debiased using the classical iterative Von Neumann's algorithm and the debiased bits were found to pass all of the 16 tests from NIST's Statistical Test Suite.

arXiv:2506.15888•IEEE International Midwest Symposium on Circuits and Systems (MWSCAS)•Aug 10, 2025•1 citation

Using the Dark Count Rate of SPAD Implemented in CMOS FD-SOI Technology for True Random Number Generator

Françis Calmon, Rida Habach, Wilfried Uhring +4 more

The objective of this study is to generate random numbers using Single Photon Avalanche Diode (SPAD) native noise, specifically the Dark Count Rate (DCR). This is achieved by counting events over a fixed acquisition time window and creating a sequence of random bits using the least significant bits of the counter. A simple model was developed to evaluate the concept, which was then implemented on noisy SPADs integrated in CMOS Fully Depleted Silicon-On-Insulator (FD-SOI) technology, resulting in a compact 3D cell. The study tested the randomness quality of the measured bit sequences under various operating conditions, including voltage and temperature. The results indicate that the measured bit sequences pass successfully the NIST randomness quality tests under specific operating conditions. It is recommended to use the least significant bit and work with a sufficiently high excess voltage.

IEEE Interregional NEWCAS Conference (NEWCAS)•Jun 22, 2025•2 citations

16.3 A 16×16 pixels SPAD-based 128-Mb/s quantum random number generator with −74dB light rejection ratio and −6.7ppm/°C bias sensitivity on temperature

Nicola Massari, Leonardo Gasparini, Alessandro Tomasi +5 more

A robust true random number generator (TRNG), able to assure high quality output at different working conditions, is an attractive solution in secure communication application, because it increases resilience against possible external attacks. Among different TRNGs, quantum RNGs (QRNG) represent a good candidate for such systems, because of their compactness, low cost and performance [1–6]. They typically consist of a source of photons, such as an attenuated LED, coupled to a detector with single photon capability (SPAD). Many works in the literature have used a single detector [1–4] for random bit extraction. These devices are characterized by a limited bit rate [1], which can be increased by exploiting the arrival time of photons at the cost of circuit and system complexity [2–4]. Recent works [5–6] proposed to implement an array of detectors based on SPAD working in parallel thus extending the speed of QRNG up to 5 Gb/s [5]. Despite the high bit rate, the main drawback of [5] is the strong dependence of each pixel bias on the impinging light intensity which forces the system to work only for a narrow range of photon flux that poses several constraints on the design of the final QRNG system, e.g. the need of a feedback control loop to maintain a constant flux of photons, and of a uniform distribution of light over the entire sensor. Moreover, it is impractical to implement algorithms for bit extraction to all detectors of the array because of different responses and mismatches among SPADs.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Jan 1, 2016•26 citations

Single-pixel postprocessing-free 5 Mbps quantum random number generator using a single-photon avalanche diode detector and a T/(T − t) pulse-shaped laser driver

Alija Dervić, Nikša Tadić, Hiwa Mahmoudi +3 more

Experimental demonstration of a quantum random number generator based on one single-photon avalanche diode (SPAD) detector, a T / ( T − t ) pulse-shaped laser, and an field-programmable gate array (FPGA) acquisition module is presented. An integrated laser driver drives an external laser diode at 670 nm wavelength, whereas the SPAD with a photon detection probability of 18.5% is integrated together with an active quenching-resetting circuit. The SPAD detector generates counts for the interarrival time (IAT) measurement system implemented in an FPGA, where the change of the IATs between consecutive pulses is used to derive a random bit stream. It is shown how the application of a pulse-shaped laser driver can increase the performance of the system as compared to the continuous-wave operation of the laser diode to achieve the maximum generation rate of 5 Mbps while using a single SPAD. The generated numbers pass all randomness tests of the National Institute of Standards and Technology (NIST), Dieharder, and ENT test (pseudorandom number sequence test) suits.

Optical Engineering•Dec 14, 2020•4 citations

Certification of the efficient random number generation technique based on single‐photon detector arrays and time‐to‐digital converters

Andrea Stanco, Davide G. Marangon, Giuseppe Vallone +3 more

Abstract True random number generators (TRNGs) allow the generation of true random bit sequences, guaranteeing the unpredictability and perfect balancing of the generated values. TRNGs can be realised from the sampling of quantum phenomena, for instance, the detection of single photons. Here, a recently proposed technique, which implements a quantum random number generator (QRNG) out of a device that was realised for a different scope, is further analysed and certified [1]. The combination of a CMOS single‐photon avalanche diode (SPAD) array, a high‐resolution time‐to‐digital converter (TDC) implemented on a field programmable gate array (FPGA), the exploitation of a single‐photon temporal degree of freedom, and an unbiased procedure provided by H. Zhou and J. Bruck [2, 3] allows the generation of true random bits with a high bitrate in a compact and easy‐to‐calibrate device. Indeed, the use of the ‘Zhou–Bruck’ method allows the removal of any correlation from the binary representation of decimal data. This perfectly fits with the usage of a device with non‐idealities like SPAD's afterpulses, pixel cross‐correlation, and time‐to‐digital converter non‐uniform conversion. In this work, an in‐depth analysis and certification of the technique presented in [1] is provided by processing the data with the NIST suite tests in order to prove the effectiveness and validity of this approach.

IET Quantum Communication•Aug 27, 2021•3 citations

All-Silicon-Based Photonic Quantum Random Number Generators

Zahra Bisadi

Random numbers are fundamental elements in different fields of science and technology such as computer simulation like Monte Carlo-method simulation, statistical sampling, cryptography, games and gambling, and other areas where unpredictable results are necessary. Random number generators (RNG) are generally classified as “pseudo”-random number generators (PRNG) and "truly" random number generators (TRNG). Pseudo random numbers are generated by computer algorithms with a (random) seed and a specific formula. The random numbers produced in this way (with a small degree of unpredictability) are good enough for some applications such as computer simulation. However, for some other applications like cryptography they are not completely reliable. When the seed is revealed, the entire sequence of numbers can be produced. The periodicity is also an undesirable property of PRNGs that can be disregarded for most practical purposes if the sequence recurs after a very long period. However, the predictability still remains a tremendous disadvantage of this type of generators. Truly random numbers, on the other hand, can be generated through physical sources of randomness like flipping a coin. However, the approaches exploiting classical motion and classical physics to generate random numbers possess a deterministic nature that is transferred to the generated random numbers. The best solution is to benefit from the assets of indeterminacy and randomness in quantum physics. Based on the quantum theory, the properties of a particle cannot be determined with arbitrary precision until a measurement is carried out. The result of a measurement, therefore, remains unpredictable and random. Optical phenomena including photons as the quanta of light have various random, non-deterministic properties. These properties include the polarization of the photons, the exact number of photons impinging a detector and the photon arrival times. Such intrinsically random properties can be exploited to generate truly random numbers. Silicon (Si) is considered as an interesting material in integrated optics. Microelectronic chips made from Si are cheap and easy to mass-fabricate, and can be densely integrated. Si integrated optical chips, that can generate, modulate, process and detect light signals, exploit the benefits of Si while also being fully compatible with electronic. Since many electronic components can be integrated into a single chip, Si is an ideal candidate for the production of small, powerful devices. By complementary metal-oxide-semiconductor (CMOS) technology, the fabrication of compact and mass manufacturable devices with integrated components on the Si platform is achievable. In this thesis we aim to model, study and fabricate a compact photonic quantum random number generator (QRNG) on the Si platform that is able to generate high quality, "truly" random numbers. The proposed QRNG is based on a Si light source (LED) coupled with a Si single photon avalanche diode (SPAD) or an array of SPADs which is called Si photomultiplier (SiPM). Various implementations of QRNG have been developed reaching an ultimate geometry where both the source and the SPAD are integrated on the same chip and fabricated by the same process. This activity was performed within the project SiQuro—on Si chip quantum optics for quantum computing and secure communications—which aims to bring the quantum world into integrated photonics. By using the same successful paradigm of microelectronics—the study and design of very small electronic devices typically made from semiconductor materials—, the vision is to have low cost and mass manufacturable integrated quantum photonic circuits for a variety of different applications in quantum computing, measure, sensing, secure communications and services. The Si platform permits, in a natural way, the integration of quantum photonics with electronics. Two methodologies are presented to generate random numbers: one is based on photon counting measurements and another one is based on photon arrival time measurements. The latter is robust, masks all the drawbacks of afterpulsing, dead time and jitter of the Si SPAD and is effectively insensitive to ageing of the LED and to its emission drifts related to temperature variations. The raw data pass all the statistical tests in national institute of standards and technology (NIST) tests suite and TestU01 Alphabit battery without a post processing algorithm. The maximum demonstrated bit rate is 1.68 Mbps with the efficiency of 4-bits per detected photon. In order to realize a small, portable QRNG, we have produced a compact configuration consisting of a Si nanocrystals (Si-NCs) LED and a SiPM. All the statistical test in the NIST tests suite pass for the raw data with the maximum bit rate of 0.5 Mbps. We also prepared and studied a compact chip consisting of a Si-NCs LED and an array of detectors. An integrated chip, composed of Si p+/n junction working in avalanche region and a Si SPAD, was produced as well. High quality random numbers are produced through our robust methodology at the highest speed of 100 kcps. Integration of the source of entropy and the detector on a single chip is an efficient way to produce a compact RNG. A small RNG is an essential element to guarantee the security of our everyday life. It can be readily implemented into electronic devices for data encryption. The idea of "utmost security" would no longer be limited to particular organs owning sensitive information. It would be accessible to every one in everyday life.

•Jan 1, 2017•1 citation
This brief presents the application of perimeter-gated single-photon avalanche diodes (pg-SPADs) as true random number generators (TRNGs). Typical SPADs have been used as random number generators (RNGs) in photon-based or dark event-based configurations, and they utilize complex debiasing algorithms to increase their random bit efficiency (RBE). In contrast, we propose leveraging the dark count rate modulation property of pg-SPADs to enable true random number generation using simpler debiasing algorithms. Further, we demonstrate that perimeter gating may be used to maintain a constant dark count rate across a wide temperature range, conferring stability to the RNG in that range. A set of debiased random bits from a tested prototype chip was benchmarked against the National Institute of Standards and Technology (NIST) Statistical Test Suite (STS) with a success rate of 99.375%.
Random number generators that utilize arrays of entropy source elements suffer from bias variation (BV). Despite the availability of efficient debiasing algorithms, optimized implementations of hardware friendly options depend on the bit bias in the raw bit streams and cannot accommodate a wide BV. In this work, we present a64×6464 \times 6464×64array of perimeter gated single photon avalanche diodes (pgSPADs), fabricated in a0.35μ m0.35 \mu ~\mathrm{m}0.35μ mstandard CMOS technology, as a source of entropy to generate random binary strings with a BV compensation technique. By applying proper gate voltages based on the devices' native dark count rates, we demonstrate less than 1 % BV for a raw-bit generation rate of2kHz/2 \text{kHz} /2kHz/pixel at room temperature. The raw bits were debiased using the classical iterative Von Neumann's algorithm and the debiased bits were found to pass all of the 16 tests from NIST's Statistical Test Suite.
The objective of this study is to generate random numbers using Single Photon Avalanche Diode (SPAD) native noise, specifically the Dark Count Rate (DCR). This is achieved by counting events over a fixed acquisition time window and creating a sequence of random bits using the least significant bits of the counter. A simple model was developed to evaluate the concept, which was then implemented on noisy SPADs integrated in CMOS Fully Depleted Silicon-On-Insulator (FD-SOI) technology, resulting in a compact 3D cell. The study tested the randomness quality of the measured bit sequences under various operating conditions, including voltage and temperature. The results indicate that the measured bit sequences pass successfully the NIST randomness quality tests under specific operating conditions. It is recommended to use the least significant bit and work with a sufficiently high excess voltage.
A robust true random number generator (TRNG), able to assure high quality output at different working conditions, is an attractive solution in secure communication application, because it increases resilience against possible external attacks. Among different TRNGs, quantum RNGs (QRNG) represent a good candidate for such systems, because of their compactness, low cost and performance [1–6]. They typically consist of a source of photons, such as an attenuated LED, coupled to a detector with single photon capability (SPAD). Many works in the literature have used a single detector [1–4] for random bit extraction. These devices are characterized by a limited bit rate [1], which can be increased by exploiting the arrival time of photons at the cost of circuit and system complexity [2–4]. Recent works [5–6] proposed to implement an array of detectors based on SPAD working in parallel thus extending the speed of QRNG up to 5 Gb/s [5]. Despite the high bit rate, the main drawback of [5] is the strong dependence of each pixel bias on the impinging light intensity which forces the system to work only for a narrow range of photon flux that poses several constraints on the design of the final QRNG system, e.g. the need of a feedback control loop to maintain a constant flux of photons, and of a uniform distribution of light over the entire sensor. Moreover, it is impractical to implement algorithms for bit extraction to all detectors of the array because of different responses and mismatches among SPADs.
Experimental demonstration of a quantum random number generator based on one single-photon avalanche diode (SPAD) detector, a T / ( T − t ) pulse-shaped laser, and an field-programmable gate array (FPGA) acquisition module is presented. An integrated laser driver drives an external laser diode at 670 nm wavelength, whereas the SPAD with a photon detection probability of 18.5% is integrated together with an active quenching-resetting circuit. The SPAD detector generates counts for the interarrival time (IAT) measurement system implemented in an FPGA, where the change of the IATs between consecutive pulses is used to derive a random bit stream. It is shown how the application of a pulse-shaped laser driver can increase the performance of the system as compared to the continuous-wave operation of the laser diode to achieve the maximum generation rate of 5 Mbps while using a single SPAD. The generated numbers pass all randomness tests of the National Institute of Standards and Technology (NIST), Dieharder, and ENT test (pseudorandom number sequence test) suits.
Abstract True random number generators (TRNGs) allow the generation of true random bit sequences, guaranteeing the unpredictability and perfect balancing of the generated values. TRNGs can be realised from the sampling of quantum phenomena, for instance, the detection of single photons. Here, a recently proposed technique, which implements a quantum random number generator (QRNG) out of a device that was realised for a different scope, is further analysed and certified [1]. The combination of a CMOS single‐photon avalanche diode (SPAD) array, a high‐resolution time‐to‐digital converter (TDC) implemented on a field programmable gate array (FPGA), the exploitation of a single‐photon temporal degree of freedom, and an unbiased procedure provided by H. Zhou and J. Bruck [2, 3] allows the generation of true random bits with a high bitrate in a compact and easy‐to‐calibrate device. Indeed, the use of the ‘Zhou–Bruck’ method allows the removal of any correlation from the binary representation of decimal data. This perfectly fits with the usage of a device with non‐idealities like SPAD's afterpulses, pixel cross‐correlation, and time‐to‐digital converter non‐uniform conversion. In this work, an in‐depth analysis and certification of the technique presented in [1] is provided by processing the data with the NIST suite tests in order to prove the effectiveness and validity of this approach.
Random numbers are fundamental elements in different fields of science and technology such as computer simulation like Monte Carlo-method simulation, statistical sampling, cryptography, games and gambling, and other areas where unpredictable results are necessary. Random number generators (RNG) are generally classified as “pseudo”-random number generators (PRNG) and "truly" random number generators (TRNG). Pseudo random numbers are generated by computer algorithms with a (random) seed and a specific formula. The random numbers produced in this way (with a small degree of unpredictability) are good enough for some applications such as computer simulation. However, for some other applications like cryptography they are not completely reliable. When the seed is revealed, the entire sequence of numbers can be produced. The periodicity is also an undesirable property of PRNGs that can be disregarded for most practical purposes if the sequence recurs after a very long period. However, the predictability still remains a tremendous disadvantage of this type of generators. Truly random numbers, on the other hand, can be generated through physical sources of randomness like flipping a coin. However, the approaches exploiting classical motion and classical physics to generate random numbers possess a deterministic nature that is transferred to the generated random numbers. The best solution is to benefit from the assets of indeterminacy and randomness in quantum physics. Based on the quantum theory, the properties of a particle cannot be determined with arbitrary precision until a measurement is carried out. The result of a measurement, therefore, remains unpredictable and random. Optical phenomena including photons as the quanta of light have various random, non-deterministic properties. These properties include the polarization of the photons, the exact number of photons impinging a detector and the photon arrival times. Such intrinsically random properties can be exploited to generate truly random numbers. Silicon (Si) is considered as an interesting material in integrated optics. Microelectronic chips made from Si are cheap and easy to mass-fabricate, and can be densely integrated. Si integrated optical chips, that can generate, modulate, process and detect light signals, exploit the benefits of Si while also being fully compatible with electronic. Since many electronic components can be integrated into a single chip, Si is an ideal candidate for the production of small, powerful devices. By complementary metal-oxide-semiconductor (CMOS) technology, the fabrication of compact and mass manufacturable devices with integrated components on the Si platform is achievable. In this thesis we aim to model, study and fabricate a compact photonic quantum random number generator (QRNG) on the Si platform that is able to generate high quality, "truly" random numbers. The proposed QRNG is based on a Si light source (LED) coupled with a Si single photon avalanche diode (SPAD) or an array of SPADs which is called Si photomultiplier (SiPM). Various implementations of QRNG have been developed reaching an ultimate geometry where both the source and the SPAD are integrated on the same chip and fabricated by the same process. This activity was performed within the project SiQuro—on Si chip quantum optics for quantum computing and secure communications—which aims to bring the quantum world into integrated photonics. By using the same successful paradigm of microelectronics—the study and design of very small electronic devices typically made from semiconductor materials—, the vision is to have low cost and mass manufacturable integrated quantum photonic circuits for a variety of different applications in quantum computing, measure, sensing, secure communications and services. The Si platform permits, in a natural way, the integration of quantum photonics with electronics. Two methodologies are presented to generate random numbers: one is based on photon counting measurements and another one is based on photon arrival time measurements. The latter is robust, masks all the drawbacks of afterpulsing, dead time and jitter of the Si SPAD and is effectively insensitive to ageing of the LED and to its emission drifts related to temperature variations. The raw data pass all the statistical tests in national institute of standards and technology (NIST) tests suite and TestU01 Alphabit battery without a post processing algorithm. The maximum demonstrated bit rate is 1.68 Mbps with the efficiency of 4-bits per detected photon. In order to realize a small, portable QRNG, we have produced a compact configuration consisting of a Si nanocrystals (Si-NCs) LED and a SiPM. All the statistical test in the NIST tests suite pass for the raw data with the maximum bit rate of 0.5 Mbps. We also prepared and studied a compact chip consisting of a Si-NCs LED and an array of detectors. An integrated chip, composed of Si p+/n junction working in avalanche region and a Si SPAD, was produced as well. High quality random numbers are produced through our robust methodology at the highest speed of 100 kcps. Integration of the source of entropy and the detector on a single chip is an efficient way to produce a compact RNG. A small RNG is an essential element to guarantee the security of our everyday life. It can be readily implemented into electronic devices for data encryption. The idea of "utmost security" would no longer be limited to particular organs owning sensitive information. It would be accessible to every one in everyday life.