Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physica C Superconductivity

Fabrication and characterization of sub-micron high current density NbN Josephson junctions for large-scale digital circuits

Yingyi Shao, Huiwu Wang, Wei Peng, Jie Ren, Zhen Wang

Published Dec 26, 2023• 5 citations
Publisher
DOI
10.1016/j.physc.2023.1354434

Related papers

Sub-micron NbN/AlN/NbN tunnel junction with high critical current density

Hirotaka Terai, Akira Kawakami, Zhen Wang

Physica C Superconductivity•Aug 1, 2002•5 citations

Niobium nitride Josephson junction process development

James M. Murduck, J. DiMond, C.Y. Dang +1 more

NbN/MgO/NbN tunnel junction fabrication has been developed using statistical experimental design for insertion into a Josephson LSI (large-scale integration) fabrication technology. Junction deposition conditions have been studied and correlated with structural characterization and junction I-V measurements. Josephson junctions with sum gaps as large as 5.0 mV and junction quality factor of 47 mV have been produced. Current density uniformity, a critical parameter in circuit design, has also been investigated. I/sub c/(O) uniformity at 4.2 K of a 4000 junction array was within sigma =3.1% and was +or-10% across 1 in/sup 2/. The utility of this junction process has been demonstrated by insertion into a standard circuit fabrication process that has produced logic circuit operation above 10 K.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•7 citations

Barrier/Electrode Interface Structure and I–V Characteristics of NbN Josephson Junctions

Masaru Igarashi, Makoto Hikita, Koji Takei

Springer eBooks•Jan 1, 1984•5 citations

Intrinsically shunted NbN/TaN/NbN Josephson junctions on Si substrates for large-scale integrated circuits applications

Kaixin Yan, Lu Zhang, Yulong Zhong +8 more

Abstract Superconducting circuits based on Josephson junctions have the potential to achieve high speed and ultra-low power consumption, but their integration is limited by the low controllability of Nb-based tunnel junction and the existence of shunt resistors. In this work, we report the fabrication of superconductor/normal metal/superconductor (SNS) Josephson junctions with high reproducibility on oxidized Si substrates. The junctions based on NbN/TaN/NbN trilayers measured at 4.2 K show excellent Josephson properties with a wide range of critical current ( I c ) from 227 to 2000 μ A. The variations of critical current density ( J c ) and characteristic voltage ( V c ) are respectively less than 7.1% and 7.5% in the 2 inch region. The standard deviation of I c is calculated to be less than 1.7% for Josephson arrays with the number of junctions up to 10 000 occupying an area of 0.34 mm 2 . The results provide a guarantee for the applications of NbN-SNS Josephson junctions in superconducting large-scale integrated circuits.

Superconductor Science and Technology•Feb 28, 2022•10 citations

Fabrication and measurement of superconducting qubits consisting of fully-epitaxial NbN-based Josephson junctions

Hirotaka Terai, Sunmi Kim, Tomoko Fuse +4 more

The Japan Society of Applied Physics•Jul 10, 2019•0 citations

Sub-micron Josephson junctions fabricated with cross-line process

Guofeng Zhang, Xue Zhang, Yongliang Wang +3 more

Physica C Superconductivity•Mar 27, 2019•9 citations
NbN/MgO/NbN tunnel junction fabrication has been developed using statistical experimental design for insertion into a Josephson LSI (large-scale integration) fabrication technology. Junction deposition conditions have been studied and correlated with structural characterization and junction I-V measurements. Josephson junctions with sum gaps as large as 5.0 mV and junction quality factor of 47 mV have been produced. Current density uniformity, a critical parameter in circuit design, has also been investigated. I/sub c/(O) uniformity at 4.2 K of a 4000 junction array was within sigma =3.1% and was +or-10% across 1 in/sup 2/. The utility of this junction process has been demonstrated by insertion into a standard circuit fabrication process that has produced logic circuit operation above 10 K.>
Abstract Superconducting circuits based on Josephson junctions have the potential to achieve high speed and ultra-low power consumption, but their integration is limited by the low controllability of Nb-based tunnel junction and the existence of shunt resistors. In this work, we report the fabrication of superconductor/normal metal/superconductor (SNS) Josephson junctions with high reproducibility on oxidized Si substrates. The junctions based on NbN/TaN/NbN trilayers measured at 4.2 K show excellent Josephson properties with a wide range of critical current ( I c ) from 227 to 2000 μ A. The variations of critical current density ( J c ) and characteristic voltage ( V c ) are respectively less than 7.1% and 7.5% in the 2 inch region. The standard deviation of I c is calculated to be less than 1.7% for Josephson arrays with the number of junctions up to 10 000 occupying an area of 0.34 mm 2 . The results provide a guarantee for the applications of NbN-SNS Josephson junctions in superconducting large-scale integrated circuits.