Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Hollow-conical atomic beam from a low-velocity intense source

Wei Li, Xiaobin Xu, Yitong Song, Rui Han, Chengchun Gao, Cheng Dai, Ningfang Song

Published Dec 4, 2023• 0 citations
Publisher

Abstract

We demonstrate, for the first time, a hollow-conical atomic beam from a standard low-velocity intense source. Experimental results and numerical simulations indicate that the hollow-conical feature is caused by the converging-diverging extraction process. The degree of hollowness can be reduced by using a weaker push beam and extending the length of transverse cooling. Analytical models are proposed to quantitatively describe the hollowness of the atomic beam. This study can find applications where a compact and solid atomic beam is needed, such as coupling cold atoms into matter waveguides or continuous cold atomic beam interferometers.

DOI
10.1364/oe.507048

Related papers

Cold atomic beam produced by a conical mirror funnel

Kihwan Kim, K. I. Lee, Heung‐Ryoul Noh +3 more

We have obtained and characterized a cold atomic beam produced by a simple conical atom funnel, which consists of a conical hollow mirror (axicon) with a small hole at the apex and a single incident laser beam. Atoms trapped in the axicon mirror are ejected by the radiation-pressure imbalance along the extraction column. The atomic beam has a longitudinal velocity in the range of 4 to 6 m/s, a divergence of 150 mrad, and a maximum instantaneous flux of $2.2\ifmmode\times\else\texttimes\fi{}{10}^{10} \mathrm{atoms}/\mathrm{s}$ in a pulsed operation. The experimental results are in quantitative agreement with the numerical simulations. A continuous atomic beam is also possible with an apex hole smaller than the trapped atomic cloud.

Physical Review A•May 31, 2001•19 citations

Evanescent light-wave atomic funnel: A tandem hollow-fiber, hollow-beam approach

Jianping Yin, Yifu Zhu, Yuzhu Wang

We propose an atomic funnel consisting of a dark hollow, divergent laser beam and an evanescent light in a short micron-sized hollow optical fiber. The cold atoms extracted from a magneto-optical trap experience effective Sisyphus cooling in the dark hollow beam. We calculate the potential barriers for atomic guiding in the evanescent light and the dark hollow beam, and analyze the atomic losses during the guiding and funneling process. Our results show that the equilibrium three-dimensional root-mean-square momentum of about $4.5\ensuremath{\Elzxh}k$ (temperature $\ensuremath{\sim}2.5\ensuremath{\mu}\mathrm{K}$) and the funneling efficiency of about 95% could be obtained. A low-velocity, intense coherent atomic beam can be generated in this funnel scheme and its potential applications in atom optics are briefly discussed.

Physical Review A•Mar 1, 1998•42 citations

Tuning the velocity and flux of a low-velocity intense source of cold atomic beam

Shu Chen, Ying-Ying Li, Xue-Shu Yan +2 more

We investigate experimentally and numerically the quantitative dependence of characteristics of a low-velocity intensity source (LVIS) of atomic beam on light parameters, especially the polarization of cooling laser along the atomic beam axis (pushing beam). By changing the polarization of the pushing beam, the longitudinal mean velocity of a rubidium atomic beam can be tuned continuously from 10 to 20 m/s and the flux can range from 3 × 10 8 to 1 × 10 9 atoms/s, corresponding to the maximum sensitivity of the velocity with respect to the polarization angle of 20 (m/s)/rad and the mean sensitivity of flux of 1.2 × 10 9 (atoms/s)/rad. The mechanism is explained with a Monte-Carlo based numerical simulation method, which shows a qualitative agreement with the experimental result. This is also a demonstration of a method enabling the fast and continuous modulation of a low-velocity intense source of cold atomic beam on the velocity or flux, which can be used in many fields, like the development of a cold atomic beam interferometer and atom lithography.

Chinese Physics B•Oct 1, 2017•2 citations

Simple atom trap in a hollow mirror and its application to atom optics

Kwanil I. Lee, Jongan I. Kim, Heung-Ruoul Noh +1 more

We present a novel and simple atom trap in a pyramidal and a conical hollow mirror cavity and its application to atom optics. Using a conical axicon mirror trap, we also have produced a pulsed cold atomic beam extracted from the trapped atoms. We point out several novel features of our cold atomic beams.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 1, 1997•4 citations

Low-Velocity Intense Source of Atoms from a Magneto-optical Trap

Zheng‐Tian Lu, Kristan L. Corwin, Michael J. Renn +3 more

We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.

Physical Review Letters•Oct 14, 1996•275 citations

A cold cesium beam source based on a two-dimensional magneto-optical trap

Weibin Xie, Qing Wang, Xuan He +4 more

A beam source is proposed for the production of an intense cold cesium atomic beam that can be used in cesium beam atomic clocks. The source is based on a two-dimensional magneto-optical trap (2D-MOT), but introduces hollow cooling and pushing lights in the axial direction to create a 2D+-MOT, which separates the cooling and pushing functions while the low-power pushing light pushes atoms out to form a cold atomic beam. This cold cesium atomic beam source reduces the light shift due to leakage light and retains longitudinal cooling to increase the flux of the cold atomic beam compared with that of the conventional 2D+-MOT scheme. The specifics of the design are investigated, the atomic velocity and beam flux are calculated, and the results are experimentally verified. The results demonstrate that when the power of the pushing light is 180 µW and when its frequency resonates with the 4 → 5′ transition of the Cs D2 line, the most probable longitudinal velocity of the outgoing cold atomic beam, the width of velocity distribution, and the atomic beam flux are 19.38 m/s, 8.1 m/s, and 1.7 × 1010 atoms/s, respectively.

AIP Advances•Jul 1, 2022•4 citations
We demonstrate, for the first time, a hollow-conical atomic beam from a standard low-velocity intense source. Experimental results and numerical simulations indicate that the hollow-conical feature is caused by the converging-diverging extraction process. The degree of hollowness can be reduced by using a weaker push beam and extending the length of transverse cooling. Analytical models are proposed to quantitatively describe the hollowness of the atomic beam. This study can find applications where a compact and solid atomic beam is needed, such as coupling cold atoms into matter waveguides or continuous cold atomic beam interferometers.
We have obtained and characterized a cold atomic beam produced by a simple conical atom funnel, which consists of a conical hollow mirror (axicon) with a small hole at the apex and a single incident laser beam. Atoms trapped in the axicon mirror are ejected by the radiation-pressure imbalance along the extraction column. The atomic beam has a longitudinal velocity in the range of 4 to 6 m/s, a divergence of 150 mrad, and a maximum instantaneous flux of $2.2\ifmmode\times\else\texttimes\fi{}{10}^{10} \mathrm{atoms}/\mathrm{s}$ in a pulsed operation. The experimental results are in quantitative agreement with the numerical simulations. A continuous atomic beam is also possible with an apex hole smaller than the trapped atomic cloud.
We propose an atomic funnel consisting of a dark hollow, divergent laser beam and an evanescent light in a short micron-sized hollow optical fiber. The cold atoms extracted from a magneto-optical trap experience effective Sisyphus cooling in the dark hollow beam. We calculate the potential barriers for atomic guiding in the evanescent light and the dark hollow beam, and analyze the atomic losses during the guiding and funneling process. Our results show that the equilibrium three-dimensional root-mean-square momentum of about $4.5\ensuremath{\Elzxh}k$ (temperature $\ensuremath{\sim}2.5\ensuremath{\mu}\mathrm{K}$) and the funneling efficiency of about 95% could be obtained. A low-velocity, intense coherent atomic beam can be generated in this funnel scheme and its potential applications in atom optics are briefly discussed.
We investigate experimentally and numerically the quantitative dependence of characteristics of a low-velocity intensity source (LVIS) of atomic beam on light parameters, especially the polarization of cooling laser along the atomic beam axis (pushing beam). By changing the polarization of the pushing beam, the longitudinal mean velocity of a rubidium atomic beam can be tuned continuously from 10 to 20 m/s and the flux can range from 3 × 10 8 to 1 × 10 9 atoms/s, corresponding to the maximum sensitivity of the velocity with respect to the polarization angle of 20 (m/s)/rad and the mean sensitivity of flux of 1.2 × 10 9 (atoms/s)/rad. The mechanism is explained with a Monte-Carlo based numerical simulation method, which shows a qualitative agreement with the experimental result. This is also a demonstration of a method enabling the fast and continuous modulation of a low-velocity intense source of cold atomic beam on the velocity or flux, which can be used in many fields, like the development of a cold atomic beam interferometer and atom lithography.
We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.
A beam source is proposed for the production of an intense cold cesium atomic beam that can be used in cesium beam atomic clocks. The source is based on a two-dimensional magneto-optical trap (2D-MOT), but introduces hollow cooling and pushing lights in the axial direction to create a 2D+-MOT, which separates the cooling and pushing functions while the low-power pushing light pushes atoms out to form a cold atomic beam. This cold cesium atomic beam source reduces the light shift due to leakage light and retains longitudinal cooling to increase the flux of the cold atomic beam compared with that of the conventional 2D+-MOT scheme. The specifics of the design are investigated, the atomic velocity and beam flux are calculated, and the results are experimentally verified. The results demonstrate that when the power of the pushing light is 180 µW and when its frequency resonates with the 4 → 5′ transition of the Cs D2 line, the most probable longitudinal velocity of the outgoing cold atomic beam, the width of velocity distribution, and the atomic beam flux are 19.38 m/s, 8.1 m/s, and 1.7 × 1010 atoms/s, respectively.