High-performance single-photon sources (SPSs) are essential components for quantum information technology and have been realized by strong coupling between a single quantum emitter and an optical cavity. However, the configurations of conventional SPSs are not ideal for long-distance quantum communication as they are intrinsically incompatible with optical fibers. Here we propose and design a strong-coupling system based on a single quantum emitter directly coupled with an in-fiber microcavity. The in-fiber microcavity not only achieves a high coupling efficiency of 83% and a high Purcell factor of 360, but also pushes the coupling system to enter the strong-coupling region with a vacuum Rabi splitting up to 4.35 meV. This enables a high quantum efficiency of 99% for a SPS. Our work presents a promising platform for realizing high-performance SPSs for long-distance quantum communication.
High-performance single-photon sources (SPSs) are essential components for quantum information technology and have been realized by strong coupling between a single quantum emitter and an optical cavity. However, the configurations of conventional SPSs are not ideal for long-distance quantum communication as they are intrinsically incompatible with optical fibers. Here we propose and design a strong-coupling system based on a single quantum emitter directly coupled with an in-fiber microcavity. The in-fiber microcavity not only achieves a high coupling efficiency of 83% and a high Purcell factor of 360, but also pushes the coupling system to enter the strong-coupling region with a vacuum Rabi splitting up to 4.35 meV. This enables a high quantum efficiency of 99% for a SPS. Our work presents a promising platform for realizing high-performance SPSs for long-distance quantum communication.
Abstract Photonic quantum technology is essentially based on the exchange of individual photons as information carriers. Therefore, the development of practical single-photon sources that emit single photons on-demand is a crucial contribution to advance this emerging technology and to promote its first real-world applications. In the last two decades, a large number of quantum light sources based on solid-state emitters have been developed on a laboratory scale. Corresponding structures today have almost ideal optical and quantum-optical properties. For practical applications, however, one crucial factor is usually missing, namely direct on-chip fiber coupling, which is essential, for example, for the direct integration of such quantum devices into fiber-based quantum networks. In fact, the development of fiber-coupled quantum light sources is still in its infancy, with very promising advances having been made in recent years. Against this background, this review article presents the current status of the development of fiber-coupled quantum light sources based on solid-state quantum emitters and discusses challenges, technological solutions and future prospects. Among other things, the numerical optimization of the fiber coupling efficiency, coupling methods, and important realizations of such quantum devices are presented and compared. Overall, this article provides an important overview of the state-of-the-art and the performance parameters of fiber-coupled quantum light sources that have been achieved so far. It is aimed equally at experts in the scientific field and at students and newcomers who want to get an overview of the current developments.
In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.
Light-matter interaction on the level of single emitters and single photons has attracted significant scientific interest in recent years. Of particular interest is strong coupling of single emitters in solid state systems and its application to quantum information processing. Due to the enormous progress in semiconductor technology it has become feasible to demonstrate strong coupling of single quantum dots in high-Q microcavity systems. Although it has been argued in these studies that it is very unlikely that several degenerated quantum dots contributed to the observed Rabi-splitting, it was not verified that the system had one and only one emitter. In this work we present proof that the emission from a strongly-coupled QD- microcavity system is dominated by a single quantum emitter.
We observe antibunching in the photons emitted from a strongly coupled single quantum dot and pillar microcavity in resonance. When the quantum dot was spectrally detuned from the cavity mode, the cavity emission remained antibunched, and also anticorrelated from the quantum dot emission. Resonant pumping of the selected quantum dot via an excited state enabled these observations by eliminating the background emitters that are usually coupled to the cavity. This device demonstrates an on-demand single-photon source operating in the strong coupling regime, with a Purcell factor of 61+/-7 and quantum efficiency of 97%.
We present a novel approach to enhance the spontaneous emission rate of single quantum emitters in an optical nanofiber-based cavity by introducing a narrow air-filled groove into the cavity. Our results show that the Purcell factor for single quantum emitters inside the groove of the nanofiber-based cavity can be at least six times greater than for such an emitter on the fiber surface when using an optimized cavity mode and groove width. Moreover, the coupling efficiency of single quantum emitters into the guided mode of this nanofiber-based cavity can reach up to ∼80% with only 35 cavity-grating periods. This new system has the potential to act as an all-fiber platform to realize efficient coupling of photons from single emitters into an optical fiber for quantum information applications.
Indistinguishable single photons in the telecom-bandwidth of optical fibers are indispensable for long-distance quantum communication. Solid-state single photon emitters have achieved excellent performance in key benchmarks, however, the demonstration of indistinguishability at room-temperature remains a major challenge. Here, we report room-temperature photon indistinguishability at telecom wavelengths from individual nanotube defects in a fiber-based microcavity operated in the regime of incoherent good cavity-coupling. The efficiency of the coupled system outperforms spectral or temporal filtering, and the photon indistinguishability is increased by more than two orders of magnitude compared to the free-space limit. Our results highlight a promising strategy to attain optimized non-classical light sources.