Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Advanced Quantum Technologies

Plug‐and‐Play Fiber‐Coupled Quantum Dot Single‐Photon Source via Photonic Wire Bonding

Marco De Gregorio, Shangxuan Yu, Donald M. Witt, Becky Lin, Matthew Mitchell, Łukasz Dusanowski, Christian Schneider, Lukas Chrostowski, Tobias Huber, Sven Höfling, Jeff F. Young, Andreas Theo Pfenning

Published Nov 2, 2023• 11 citations
Publisher

Abstract

Abstract The collection of single‐photon emission from a quantum dot (QD) in a Bragg waveguide through a photonic wire bond (PWB) via free‐space resonant frequency pumping at 1.6 K is demonstrated. The in‐fiber single photons show a small multiphoton contribution, quantified by a low second order photon autocorrelation value of (background‐corrected) or (raw data). The decay time of the QD is measured to be ps. The PWB obviates the need for in‐cryostat alignment of the single‐photon source with an optical fiber and thus offers a route to scalable integration of quantum photonic devices in a cryogenic environment. Uniquely, the approach combines the QD‐waveguide technique, enabling resonant driving of individual QDs without the need for cross‐polarization filtering, and the PWB for deterministic, alignment‐free coupling of single‐photon sources to optical fibers.

DOI
10.1002/qute.202300227

Related papers

A fiber‐pigtailed quantum dot device generating indistinguishable photons at GHz clock‐rates

Lucas Rickert, Kinga Żołnacz, Daniel A. Vajner +11 more

Abstract Solid‐state quantum light sources based on semiconductor quantum dots (QDs) are increasingly employed in photonic quantum information applications. Especially when moving towards real‐world scenarios outside shielded lab environments, the efficient and robust coupling of nanophotonic devices to single‐mode optical fibers offers substantial advantage by enabling “plug‐and‐play” operation. In this work we present a fiber‐pigtailed cavity‐enhanced source of flying qubits emitting single indistinguishable photons at clock‐rates exceeding 1 GHz. This is achieved by employing a fully deterministic technique for fiber‐pigtailing optimized QD‐devices based on hybrid circular Bragg grating (hCBG) micro‐cavities. The fabricated fiber‐pigtailed hCBGs feature emission lifetimes of ps, corresponding to a Purcell factor of ∼9, a suppression of multi‐photon emission events with g (2) (0) < 1 %, a photon‐indistinguishability % and a measured single‐photon coupling efficiency of 53 % in a high numerical aperture single‐mode fiber, corresponding to 1.2 Megaclicks per second at the single‐photon detectors under 80 MHz excitation clock‐rates. Furthermore, we show that high multi‐photon suppression and indistinguishability prevail for excitation clock‐rates exceeding 1 GHz. Our results show that Purcell‐enhanced fiber‐pigtailed quantum light sources based on hCBG cavities are a prime candidate for applications of quantum information science.

arXiv:2409.08982•Nanophotonics•Jan 3, 2025•22 citations

A stand-alone fiber-coupled single-photon source

Alexander Schlehahn, Sarah Fischbach, Ronny Schmidt +5 more

Abstract In this work, we present a stand-alone and fiber-coupled quantum-light source. The plug-and-play device is based on an optically driven quantum dot delivering single photons via an optical fiber. The quantum dot is deterministically integrated in a monolithic microlens which is precisely coupled to the core of an optical fiber via active optical alignment and epoxide adhesive bonding. The rigidly coupled fiber-emitter assembly is integrated in a compact Stirling cryocooler with a base temperature of 35 K. We benchmark our practical quantum device via photon auto-correlation measurements revealing g(2)(0) = 0.07 ± 0.05 under continuous-wave excitation and we demonstrate triggered non-classical light at a repetition rate of 80 MHz. The long-term stability of our quantum light source is evaluated by endurance tests showing that the fiber-coupled quantum dot emission is stable within 4% over several successive cool-down/warm-up cycles. Additionally, we demonstrate non-classical photon emission for a user-intervention-free 100-hour test run and stable single-photon count rates up to 11.7 kHz with a standard deviation of 4%.

arXiv:1703.10536•Scientific Reports•Jan 16, 2018•100 citations

C-band plug-and-play all-fiber single-photon source based on In As / In P quantum dots integrated via microtransfer printing

Marek G. Mikulicz, Paweł Mrowiński, Paweł Holewa +3 more

Fiber-based long-haul quantum communication would greatly benefit from a robust and deterministically integrated source of quantum states. Here, we report the design, fabrication, and optical characterization of In As / In P quantum dots in the In P H1 point-defect 2D photonic crystal cavity, integrated with a standard single-mode fiber employing microtransfer printing. The device is placed in a compact cryocooler maintaining a cryogenic temperature of 15 K, and it exhibits a low multiphoton contribution to emission, with g ( 2 ) ( 0 ) = 0.14 ( 14 ) in the all-fiber-based optical link between two laboratory nodes. In this way, we demonstrate a plug-and-play all-fiber single-photon source operating in the third telecom window, where standard telecommunication fiber networks can be used as a low-loss medium.

arXiv:2411.16490•Physical Review Applied•Jun 5, 2025•6 citations

“Plug and Play” single photons at 1.3μm approaching gigahertz operation

Xiulai Xu, Frederic S. F. Brossard, Kiyotaka Hammura +4 more

We report a “plug and play” single photon source, fully integrated with an optical fiber, emitting at 1.3μm. Micropillars were patterned on a single layer InAs quantum dot wafer to guarantee a single pillar per fiber core. The single exciton peak filtered with a tunable optical filter was fed to a Hanbury Brown and Twiss interferometer, and the second order correlation function at zero delay was less than 0.5, indicating single photon emission. The measured decay dynamics under double-pulse excitation show that the single photon device can be operated at speeds greater than 0.5GHz.

Applied Physics Letters•Jul 14, 2008•42 citations

Plug-and-play fiber coupled single emitters under cryogenic conditions

Vladislav Bushmakin, Yijun Wang, Guilherme Stein +3 more

A single-photon source is an essential tool for the emerging field of quantum technologies. Ideally, it should be spectrally compatible with other photonic systems while providing a high flux of narrow-band photons. The single organic dye molecule dibenzanthantherene (DBATT) embedded into a n-tetradecane Spol’skii matrix under cryogenic conditions possesses the given characteristics, thus constitutes a prominent single-photon source. Nevertheless, the implementation of such a single-photon source requires an elaborate experimental setup involving a cryostat with a confocal microscope for the effective collection of the molecule’s emission. Another approach is to use a single emitter coupled to an optical fiber. This approach has the potential to transfer a single-photon source from a proof-of-principle type of setup to a scalable “plug and play” device. Here we present the alignment-free fiber-coupled organic molecule single-photon source cooled down to cryogenic temperatures using a transport dewar as a cryostat.

AIP conference proceedings•Jan 1, 2021•0 citations

“Plug and play” single-photon sources

Xiulai Xu, Ian Toft, R. T. Phillips +3 more

The authors report a “plug and play” source of single photons, with full integration to a single-mode optical fiber. One end of the fiber is attached to the top of an InGaAs∕GaAs quantum dot wafer. The other end is connected via a wavelength-division multiplexing system to two separate fibers: one for carrying excitation light and the other for emitted light. A Hanbury-Brown and Twiss [Nature (London) 77, 27 (1956)] measurement was performed on the emission from single excitons recombining in the quantum dots. A second-order correlation function at zero time delay of approximately 0.01 indicates a nearly ideal source of single photons. The maximum variation of peak position over 24days is less than 0.1nm.

Applied Physics Letters•Feb 5, 2007•55 citations
Abstract The collection of single‐photon emission from a quantum dot (QD) in a Bragg waveguide through a photonic wire bond (PWB) via free‐space resonant frequency pumping at 1.6 K is demonstrated. The in‐fiber single photons show a small multiphoton contribution, quantified by a low second order photon autocorrelation value of (background‐corrected) or (raw data). The decay time of the QD is measured to be ps. The PWB obviates the need for in‐cryostat alignment of the single‐photon source with an optical fiber and thus offers a route to scalable integration of quantum photonic devices in a cryogenic environment. Uniquely, the approach combines the QD‐waveguide technique, enabling resonant driving of individual QDs without the need for cross‐polarization filtering, and the PWB for deterministic, alignment‐free coupling of single‐photon sources to optical fibers.
Abstract Solid‐state quantum light sources based on semiconductor quantum dots (QDs) are increasingly employed in photonic quantum information applications. Especially when moving towards real‐world scenarios outside shielded lab environments, the efficient and robust coupling of nanophotonic devices to single‐mode optical fibers offers substantial advantage by enabling “plug‐and‐play” operation. In this work we present a fiber‐pigtailed cavity‐enhanced source of flying qubits emitting single indistinguishable photons at clock‐rates exceeding 1 GHz. This is achieved by employing a fully deterministic technique for fiber‐pigtailing optimized QD‐devices based on hybrid circular Bragg grating (hCBG) micro‐cavities. The fabricated fiber‐pigtailed hCBGs feature emission lifetimes of ps, corresponding to a Purcell factor of ∼9, a suppression of multi‐photon emission events with g (2) (0) < 1 %, a photon‐indistinguishability % and a measured single‐photon coupling efficiency of 53 % in a high numerical aperture single‐mode fiber, corresponding to 1.2 Megaclicks per second at the single‐photon detectors under 80 MHz excitation clock‐rates. Furthermore, we show that high multi‐photon suppression and indistinguishability prevail for excitation clock‐rates exceeding 1 GHz. Our results show that Purcell‐enhanced fiber‐pigtailed quantum light sources based on hCBG cavities are a prime candidate for applications of quantum information science.
Abstract In this work, we present a stand-alone and fiber-coupled quantum-light source. The plug-and-play device is based on an optically driven quantum dot delivering single photons via an optical fiber. The quantum dot is deterministically integrated in a monolithic microlens which is precisely coupled to the core of an optical fiber via active optical alignment and epoxide adhesive bonding. The rigidly coupled fiber-emitter assembly is integrated in a compact Stirling cryocooler with a base temperature of 35 K. We benchmark our practical quantum device via photon auto-correlation measurements revealing g(2)(0) = 0.07 ± 0.05 under continuous-wave excitation and we demonstrate triggered non-classical light at a repetition rate of 80 MHz. The long-term stability of our quantum light source is evaluated by endurance tests showing that the fiber-coupled quantum dot emission is stable within 4% over several successive cool-down/warm-up cycles. Additionally, we demonstrate non-classical photon emission for a user-intervention-free 100-hour test run and stable single-photon count rates up to 11.7 kHz with a standard deviation of 4%.
Fiber-based long-haul quantum communication would greatly benefit from a robust and deterministically integrated source of quantum states. Here, we report the design, fabrication, and optical characterization of In As / In P quantum dots in the In P H1 point-defect 2D photonic crystal cavity, integrated with a standard single-mode fiber employing microtransfer printing. The device is placed in a compact cryocooler maintaining a cryogenic temperature of 15 K, and it exhibits a low multiphoton contribution to emission, with g ( 2 ) ( 0 ) = 0.14 ( 14 ) in the all-fiber-based optical link between two laboratory nodes. In this way, we demonstrate a plug-and-play all-fiber single-photon source operating in the third telecom window, where standard telecommunication fiber networks can be used as a low-loss medium.
We report a “plug and play” single photon source, fully integrated with an optical fiber, emitting at 1.3μm. Micropillars were patterned on a single layer InAs quantum dot wafer to guarantee a single pillar per fiber core. The single exciton peak filtered with a tunable optical filter was fed to a Hanbury Brown and Twiss interferometer, and the second order correlation function at zero delay was less than 0.5, indicating single photon emission. The measured decay dynamics under double-pulse excitation show that the single photon device can be operated at speeds greater than 0.5GHz.
A single-photon source is an essential tool for the emerging field of quantum technologies. Ideally, it should be spectrally compatible with other photonic systems while providing a high flux of narrow-band photons. The single organic dye molecule dibenzanthantherene (DBATT) embedded into a n-tetradecane Spol’skii matrix under cryogenic conditions possesses the given characteristics, thus constitutes a prominent single-photon source. Nevertheless, the implementation of such a single-photon source requires an elaborate experimental setup involving a cryostat with a confocal microscope for the effective collection of the molecule’s emission. Another approach is to use a single emitter coupled to an optical fiber. This approach has the potential to transfer a single-photon source from a proof-of-principle type of setup to a scalable “plug and play” device. Here we present the alignment-free fiber-coupled organic molecule single-photon source cooled down to cryogenic temperatures using a transport dewar as a cryostat.
The authors report a “plug and play” source of single photons, with full integration to a single-mode optical fiber. One end of the fiber is attached to the top of an InGaAs∕GaAs quantum dot wafer. The other end is connected via a wavelength-division multiplexing system to two separate fibers: one for carrying excitation light and the other for emitted light. A Hanbury-Brown and Twiss [Nature (London) 77, 27 (1956)] measurement was performed on the emission from single excitons recombining in the quantum dots. A second-order correlation function at zero time delay of approximately 0.01 indicates a nearly ideal source of single photons. The maximum variation of peak position over 24days is less than 0.1nm.