Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Oxford University Press eBooks

Ion traps

Christopher J. Foot

Published Nov 25, 2004• 0 citations
Publisher

Abstract

Abstract In a trap operating with a voltage of 10 = 500 V, singly-charged ions have a maximum ‘binding’ energy of order 500eV.3 This trap depth corresponds to the kinetic energy at a temperature of 6 x 106 K. This is more than enough to trap ions, even if the ions do receive a large recoil kick during the ionization process-to load an ion trap experimenters send a weak (neutral) atomic beam through the trapping region where an electron beam ionizes a few of the atoms by knocking an electron off. These ions created by electron bombardment have much greater kinetic energy than the thermal energy of atoms at room temperature (equivalent to only 1 / 40 eV). It would be unwise to try to be more precise about the typical energy of an ion since it depends on the voltage used. In contrast, a magnetic trap for neutrals has a maximum depth of only 0.07K.

DOI
10.1093/oso/9780198506959.003.0012

Related papers

Capture and isolation of highly charged ions in a unitary Penning trap

Samuel M. Brewer, Nicholas D. Guise, Joseph N. Tan

We recently used a compact Penning trap to capture and isolate highly charged ions extracted from an electron beam ion trap (EBIT) at the National Institute of Standards and Technology. Isolated charge states of highly stripped argon and neon ions with total charge $Q\ensuremath{\ge}10$, extracted at energies of up to $4\ifmmode\times\else\texttimes\fi{}{10}^{3}\phantom{\rule{0.16em}{0ex}}Q$ eV, are captured in a trap with well depths of $\phantom{\rule{0.16em}{0ex}}\ensuremath{\approx}(4--12)Q$ eV. Here we discuss in detail the process to optimize velocity tuning, capture, and storage of highly charged ions in a unitary Penning trap designed to provide easy radial access for atomic or laser beams in charge exchange or spectroscopic experiments, such as those of interest for proposed studies of one-electron ions in Rydberg states or optical transitions of metastable states in multiply charged ions. Under near-optimal conditions, ions captured and isolated in such rare-earth Penning traps can be characterized by an initial energy distribution that is $\ensuremath{\approx}60$ times narrower than typically found in an EBIT. This reduction in thermal energy is obtained passively, without the application of any active cooling scheme in the ion-capture trap.

arXiv:1312.0547•Physical Review A•Dec 4, 2013•20 citations

Bright source of cold ions for surface-electrode traps

Marko Cetina, Andrew T. Grier, Jonathan Campbell +2 more

We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap's loading rate of $4\ifmmode\times\else\texttimes\fi{}{10}^{5}\phantom{\rule{0.3em}{0ex}}{\mathrm{Yb}}^{+}\phantom{\rule{0.3em}{0ex}}\mathrm{ions}∕\mathrm{s}$ exceeds that attained by photoionization (electron-impact ionization) of an atomic beam by three (six) orders of magnitude. Traps as shallow as $0.13\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$ are easily loaded with this technique. The ions are confined in the same spatial region as the laser-cooled atoms, which will allow the experimental investigation of interactions between cold ions and cold atoms or Bose-Einstein condensates.

arXiv:physics/0702025•Physical Review A•Oct 24, 2007•54 citations

Cooling and Trapping Neutral Atoms (1985)

S. Brandt

Abstract Atomic beams, pioneered by Stern (Episodes 30 and 52), opened the way to study non-interacting atoms which, essentially, have only one component in velocity, namely, that in beam direction. Ions could even be confined in a trap(Episode 80) with small values of all three velocity components. We shall see now how that was achieved also for neutral atoms. A measure of quality for a gas of trapped atoms is its temperature, i.e., the average kinetic energy of the atoms expressed in Kelvin. By carefully exploiting the inner structure of atoms it became possible, with the help of laser light and magnetic fields, to cool and trap small samples of highly dilute atomic gases, reaching temperatures as low as 180 nK (180 × 10‒9 K).

Oxford University Press eBooks•Apr 22, 1992•1 citation

Kinetic energy measurements of ions stored in a RF trap by use of phase-stopped ejection and retarding potential methods

R.-J. Champeau, A. Crubellier, J O Gaardsted +2 more

The kinetic energy distribution of a cloud of ions stored in a RF trap has been investigated by use of two methods based on phase-stopped ejection. The oscillation of the RF voltage is stopped at a phase corresponding to zero field Value inside the trap. After their subsequent ejection from the trap, the ions are detected by an electron multiplier. The instantaneous ion cloud temperature value corresponding to the phase-stopping time can be deduced from the recorded profile of the ion signal. An alternative method consists in submitting the ejected ions to a repulsive field, applied before the detector, which allows us to discriminate the velocity classes. In both cases, the experiments are interpreted thanks to a simple theoretical description of a cloud of ions at thermal equilibrium in a RF trap and to a precise calculation of the ejection process. Both methods are compared, for the various trap working points. In all cases, the ion cloud average temperature is of the order of a tenth of the potential well depth.

Journal of Physics B Atomic Molecular and Optical Physics•Mar 14, 1994•4 citations

Kinetic theory of radio frequency quadrupole ion traps. I. Trapping of atomic ions in a pure atomic gas

Larry A. Viehland, Douglas E. Goeringer

A kinetic theory based on the Boltzmann equation is developed for the trapping of atomic ions in a radio-frequency quadrupole ion trap containing enough neutral atoms that ion-neutral collisions cannot be ignored. The collisions are treated at the same level of sophistication and detail as is used to deal with the time- and space-dependent electric fields in the trap. As a result, microscopic definitions are obtained for the damping and stochastic forces that originate from such collisions. These definitions contrast with corresponding phenomenological terms added ad hoc in previous treatments to create damped Mathieu and Langevin equations, respectively. Furthermore, the theory indicates that either collisional cooling or heating of the ions is possible, depending upon details of the ion-neutral mass ratios and interaction potential. The kinetic theory is not dependent on any special assumptions about the electric field strengths, the ion-neutral interaction potentials, or the ion-neutral mass ratio. It also provides an ab initio way to describe the ion kinetic energies, temperatures, and other properties by a series of successive approximations.

The Journal of Chemical Physics•Apr 28, 2004•7 citations

Magnetic trapping of neutral atoms

Thomas H. Bergeman, Harold J. Metcalf

Magnetic trapping of laser-cooled neutral atoms has been demonstrated at NBS and is progressing in other laboratories. Confinement of any object requires exchanging kinetic for potential energy, and for neutral atoms, this necessarily derives from shifts of internal energy levels. This is implemented through the force experienced by the atomic magnetic moment in a carefully designed, highly inhomogeneous field. Since magnetic fields of convenient strength can shift atomic energy levels by only a few gigahertz (temperature ≌ 0.1 K), neutral atom traps are very shallow and must be loaded with very cold atoms. We present some motivations for using magnetic traps and then discuss the constraints and optimal configurations of various arrangements. For example, no trap can be isotropic. Next we discuss both the classical and quantum mechanical motions of trapped atoms. These motions are important for at least two reasons: First, several schemes under study for further cooling depend on knowing the position and velocity of the atoms, as well as the vector field at each point along the orbit. Second, magnetic traps depend on the atomic moment remaining aligned with the field as the atom orbits in the trap, and this precludes rapid motion through a low-field region.

International Laser Science Conference•Jan 1, 1986•0 citations
Abstract In a trap operating with a voltage of 10 = 500 V, singly-charged ions have a maximum ‘binding’ energy of order 500eV.3 This trap depth corresponds to the kinetic energy at a temperature of 6 x 106 K. This is more than enough to trap ions, even if the ions do receive a large recoil kick during the ionization process-to load an ion trap experimenters send a weak (neutral) atomic beam through the trapping region where an electron beam ionizes a few of the atoms by knocking an electron off. These ions created by electron bombardment have much greater kinetic energy than the thermal energy of atoms at room temperature (equivalent to only 1 / 40 eV). It would be unwise to try to be more precise about the typical energy of an ion since it depends on the voltage used. In contrast, a magnetic trap for neutrals has a maximum depth of only 0.07K.
We recently used a compact Penning trap to capture and isolate highly charged ions extracted from an electron beam ion trap (EBIT) at the National Institute of Standards and Technology. Isolated charge states of highly stripped argon and neon ions with total charge $Q\ensuremath{\ge}10$, extracted at energies of up to $4\ifmmode\times\else\texttimes\fi{}{10}^{3}\phantom{\rule{0.16em}{0ex}}Q$ eV, are captured in a trap with well depths of $\phantom{\rule{0.16em}{0ex}}\ensuremath{\approx}(4--12)Q$ eV. Here we discuss in detail the process to optimize velocity tuning, capture, and storage of highly charged ions in a unitary Penning trap designed to provide easy radial access for atomic or laser beams in charge exchange or spectroscopic experiments, such as those of interest for proposed studies of one-electron ions in Rydberg states or optical transitions of metastable states in multiply charged ions. Under near-optimal conditions, ions captured and isolated in such rare-earth Penning traps can be characterized by an initial energy distribution that is $\ensuremath{\approx}60$ times narrower than typically found in an EBIT. This reduction in thermal energy is obtained passively, without the application of any active cooling scheme in the ion-capture trap.
We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap's loading rate of $4\ifmmode\times\else\texttimes\fi{}{10}^{5}\phantom{\rule{0.3em}{0ex}}{\mathrm{Yb}}^{+}\phantom{\rule{0.3em}{0ex}}\mathrm{ions}∕\mathrm{s}$ exceeds that attained by photoionization (electron-impact ionization) of an atomic beam by three (six) orders of magnitude. Traps as shallow as 0.13eV0.13\phantom{\rule{0.3em}{0ex}}\mathrm{eV}0.13eV are easily loaded with this technique. The ions are confined in the same spatial region as the laser-cooled atoms, which will allow the experimental investigation of interactions between cold ions and cold atoms or Bose-Einstein condensates.
Abstract Atomic beams, pioneered by Stern (Episodes 30 and 52), opened the way to study non-interacting atoms which, essentially, have only one component in velocity, namely, that in beam direction. Ions could even be confined in a trap(Episode 80) with small values of all three velocity components. We shall see now how that was achieved also for neutral atoms. A measure of quality for a gas of trapped atoms is its temperature, i.e., the average kinetic energy of the atoms expressed in Kelvin. By carefully exploiting the inner structure of atoms it became possible, with the help of laser light and magnetic fields, to cool and trap small samples of highly dilute atomic gases, reaching temperatures as low as 180 nK (180 × 10‒9 K).
The kinetic energy distribution of a cloud of ions stored in a RF trap has been investigated by use of two methods based on phase-stopped ejection. The oscillation of the RF voltage is stopped at a phase corresponding to zero field Value inside the trap. After their subsequent ejection from the trap, the ions are detected by an electron multiplier. The instantaneous ion cloud temperature value corresponding to the phase-stopping time can be deduced from the recorded profile of the ion signal. An alternative method consists in submitting the ejected ions to a repulsive field, applied before the detector, which allows us to discriminate the velocity classes. In both cases, the experiments are interpreted thanks to a simple theoretical description of a cloud of ions at thermal equilibrium in a RF trap and to a precise calculation of the ejection process. Both methods are compared, for the various trap working points. In all cases, the ion cloud average temperature is of the order of a tenth of the potential well depth.
A kinetic theory based on the Boltzmann equation is developed for the trapping of atomic ions in a radio-frequency quadrupole ion trap containing enough neutral atoms that ion-neutral collisions cannot be ignored. The collisions are treated at the same level of sophistication and detail as is used to deal with the time- and space-dependent electric fields in the trap. As a result, microscopic definitions are obtained for the damping and stochastic forces that originate from such collisions. These definitions contrast with corresponding phenomenological terms added ad hoc in previous treatments to create damped Mathieu and Langevin equations, respectively. Furthermore, the theory indicates that either collisional cooling or heating of the ions is possible, depending upon details of the ion-neutral mass ratios and interaction potential. The kinetic theory is not dependent on any special assumptions about the electric field strengths, the ion-neutral interaction potentials, or the ion-neutral mass ratio. It also provides an ab initio way to describe the ion kinetic energies, temperatures, and other properties by a series of successive approximations.
Magnetic trapping of laser-cooled neutral atoms has been demonstrated at NBS and is progressing in other laboratories. Confinement of any object requires exchanging kinetic for potential energy, and for neutral atoms, this necessarily derives from shifts of internal energy levels. This is implemented through the force experienced by the atomic magnetic moment in a carefully designed, highly inhomogeneous field. Since magnetic fields of convenient strength can shift atomic energy levels by only a few gigahertz (temperature ≌ 0.1 K), neutral atom traps are very shallow and must be loaded with very cold atoms. We present some motivations for using magnetic traps and then discuss the constraints and optimal configurations of various arrangements. For example, no trap can be isotropic. Next we discuss both the classical and quantum mechanical motions of trapped atoms. These motions are important for at least two reasons: First, several schemes under study for further cooling depend on knowing the position and velocity of the atoms, as well as the vector field at each point along the orbit. Second, magnetic traps depend on the atomic moment remaining aligned with the field as the atom orbits in the trap, and this precludes rapid motion through a low-field region.