Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Information Technology and Mechatronics Engineering Conference (ITOEC)

Research on High-integrated Low-latency Superconducting Quantum Readout System

Kun Jia, Zhijie Ge, H. Wang, Haozhi Liu, Jialin Xu, Qiongzhi Wu

Published Sep 15, 2023• 1 citation
Publisher

Abstract

Superconducting quantum computing has gained significant attention for its ability to prepare a large number of qubits easily. However, the superconducting quantum readout systems, which serve as the foundation of superconducting quantum computing, still face several challenges including low integration, high computing delay, and reduced flexibility. In this paper, a highly integrated and low-latency superconducting readout system is introduced. This system, built on RFSoC chip, comprises multiple analog-to-digital and digital-to-analog conversion channels, as well as demodulation calculation units, to improve the degree of integration. The system employs a time-optimized single-channel matching filter demodulation algorithm to address the problem of high delay associated with readout systems, achieving a demodulation calculation delay of 19.2ns. Additionally, the system supports multiple quantum measurement and control experiments through the parameterization and modular design of functional modules. The actual test reveals that the qubit fidelity F00 and F11 obtained with this system can reach 99.5% and 98.6%, respectively, while the readout speed is significantly enhanced compared to software-based calculation. This system effectively improves the accuracy of quantum state readout.

DOI
10.1109/itoec57671.2023.10291440

Related papers

Hardware for multi-superconducting qubit control and readout*

Zhan Wang, Hai Yang Yu, Rongli Liu +7 more

We have developed an electronic hardware system for the control and readout of multi-superconducting qubit devices. The hardware system is based on the design ideas of good scalability, high synchronization and low latency. The system, housed inside a VPX-6U chassis, includes multiple arbitrary-waveform generator (AWG) channels, analog-digital-converter (ADC) channels as well as direct current source channels. The system can be used for the control and readout of up to twelve superconducting transmon qubits in one chassis, and control and readout of more and more qubit can be carried out by interconnecting the chassis. By using field programmable gate array (FPGA) processors, the system incorporates three features that are specifically useful for superconducting qubit research. Firstly, qubit signals can be processed using the on-board FPGA after being acquired by ADCs, significantly reducing data processing time and data amount for storage and transmission. Secondly, different output modes, such as direct output and sequential output modes, of AWG can be implemented with pre-encoded FPGA. Thirdly, with data acquisition ADCs and controlAWGs jointly controlled by the same FPGA, the feedback latency can be reduced, and in ourtest a 178.4 ns latency time is realized. This is very useful for future quantum feedback experiments. Finally, we demonstrate the functionality of the system by applying the system to the control and readout of a 10 qubit superconducting quantum processor.

Chinese Physics B•May 24, 2021•7 citations

Mixerless RFSoC Microwave Signal Generation for Superconducting Circuit Applications

R. Gartmann, Valentin Stumpert, Lukas Scheller +3 more

In the realm of quantum computing and low-temperature detectors, precise signal conditioning is crucial for the effective readout and control of superconducting qubits and sensors. As these technologies evolve, the need for increasingly sophisticated and integrated systems becomes more apparent. This contribution presents the design of a mixer-less analog front-end board optimized for superconducting circuit interfacing. It leverages the capabilities of the Radio-Frequency System-on-Chip (RFSoC) from AMD Xilinx and utilizes software-selectable channel filtering stages, ultimately achieving wide-band signals without analog local oscillator leakage.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•2 citations

Low-latency readout electronics for dynamic superconducting quantum computing

Cheng Guo, Jin Lin, Lianchen Han +9 more

Dynamic quantum computing can support quantum error correction circuits to build a large general-purpose quantum computer, which requires electronic instruments to perform the closed-loop operation of readout, processing, and control within 1% of the qubit coherence time. In this paper, we present low-latency readout electronics for dynamic superconducting quantum computing. The readout electronics use a low-latency analog-to-digital converter to capture analog signals, a field-programmable gate array (FPGA) to process digital signals, and the general I/O resources of the FPGA to forward the readout results. Running an algorithm based on the design of multichannel parallelism and single instruction multiple data on an FPGA, the readout electronics achieve a readout latency of 40 ns from the last sample input to the readout valid output. The feedback data link for cross-instrument communication shows a communication latency of 48 ns when 16 bits of data are transmitted over a 2 m-length cable using a homologous clock to drive the transceiver. With codeword-based triggering mechanisms, readout electronics can be used in dynamic superconducting quantum computing.

AIP Advances•Apr 1, 2022•11 citations

Superconducting qubit readout and control system based on FPGA and development of a pulse sequencer

BOVE, LEONARDO

This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.

•Sep 27, 2025•0 citations

Low-latency machine learning FPGA accelerator for multi-qubit-state discrimination

Gautam, Pradeep Kumar, Shantharam Kalipatnapu, H Shankaranarayanan +4 more

Measuring a qubit state is a fundamental yet error-prone operation in quantum computing. These errors can arise from various sources, such as crosstalk, spontaneous state transitions, and excitations caused by the readout pulse. Here, we utilize an integrated approach to deploy neural networks onto field-programmable gate arrays (FPGA). We demonstrate that implementing a fully connected neural network accelerator for multi-qubit readout is advantageous, balancing computational complexity with low latency requirements without significant loss in accuracy. The neural network is implemented by quantizing weights, activation functions, and inputs. The hardware accelerator performs frequency-multiplexed readout of five superconducting qubits in less than 50 ns on a radio frequency system on chip (RFSoC) ZCU111 FPGA, marking the advent of RFSoC-based low-latency multi-qubit readout using neural networks. These modules can be implemented and integrated into existing quantum control and readout platforms, making the RFSoC ZCU111 ready for experimental deployment.

arXiv:2407.03852•Jul 4, 2024•8 citations

QiCells: A Modular RFSoC-based Approach to Interface Superconducting Quantum Bits

Richard Gebauer, Nick Karcher, Mehmed Güler +1 more

Quantum computers will be a revolutionary extension of the heterogeneous computing world. They consist of many quantum bits (qubits) and require a careful design of the interface between the classical computer architecture and the quantum processor. For example, even single nanosecond variations of the interaction may have an influence on the quantum state. Designing a tailored interface electronics is therefore a major challenge, both in terms of signal integrity with respect to single channels, as well as the scaling of the signal count. We developed such an interface electronics, an RFSoC-based qubit control system called QiController. In this article, we present the modular FPGA firmware design of our system. It features so-called digital unit cells, or QiCells. Each cell contains all the logic necessary to interact with a single superconducting qubit, including a custom-built RISC-V-based sequencer. Synchronization and data exchange between the cells is facilitated using a special star-point structure. Versatile routing and frequency-division multiplexing of generated signals between QiCells and converters are also supported. High-level programmability is provided using a custom Python-based description language and an associated compiler. We furthermore provide the resource utilization of our design and demonstrate its correct operation using an actual superconducting five-qubit chip.

ACM Transactions on Reconfigurable Technology and Systems•Dec 26, 2022•11 citations
Superconducting quantum computing has gained significant attention for its ability to prepare a large number of qubits easily. However, the superconducting quantum readout systems, which serve as the foundation of superconducting quantum computing, still face several challenges including low integration, high computing delay, and reduced flexibility. In this paper, a highly integrated and low-latency superconducting readout system is introduced. This system, built on RFSoC chip, comprises multiple analog-to-digital and digital-to-analog conversion channels, as well as demodulation calculation units, to improve the degree of integration. The system employs a time-optimized single-channel matching filter demodulation algorithm to address the problem of high delay associated with readout systems, achieving a demodulation calculation delay of 19.2ns. Additionally, the system supports multiple quantum measurement and control experiments through the parameterization and modular design of functional modules. The actual test reveals that the qubit fidelity F00 and F11 obtained with this system can reach 99.5% and 98.6%, respectively, while the readout speed is significantly enhanced compared to software-based calculation. This system effectively improves the accuracy of quantum state readout.
We have developed an electronic hardware system for the control and readout of multi-superconducting qubit devices. The hardware system is based on the design ideas of good scalability, high synchronization and low latency. The system, housed inside a VPX-6U chassis, includes multiple arbitrary-waveform generator (AWG) channels, analog-digital-converter (ADC) channels as well as direct current source channels. The system can be used for the control and readout of up to twelve superconducting transmon qubits in one chassis, and control and readout of more and more qubit can be carried out by interconnecting the chassis. By using field programmable gate array (FPGA) processors, the system incorporates three features that are specifically useful for superconducting qubit research. Firstly, qubit signals can be processed using the on-board FPGA after being acquired by ADCs, significantly reducing data processing time and data amount for storage and transmission. Secondly, different output modes, such as direct output and sequential output modes, of AWG can be implemented with pre-encoded FPGA. Thirdly, with data acquisition ADCs and controlAWGs jointly controlled by the same FPGA, the feedback latency can be reduced, and in ourtest a 178.4 ns latency time is realized. This is very useful for future quantum feedback experiments. Finally, we demonstrate the functionality of the system by applying the system to the control and readout of a 10 qubit superconducting quantum processor.
In the realm of quantum computing and low-temperature detectors, precise signal conditioning is crucial for the effective readout and control of superconducting qubits and sensors. As these technologies evolve, the need for increasingly sophisticated and integrated systems becomes more apparent. This contribution presents the design of a mixer-less analog front-end board optimized for superconducting circuit interfacing. It leverages the capabilities of the Radio-Frequency System-on-Chip (RFSoC) from AMD Xilinx and utilizes software-selectable channel filtering stages, ultimately achieving wide-band signals without analog local oscillator leakage.
Dynamic quantum computing can support quantum error correction circuits to build a large general-purpose quantum computer, which requires electronic instruments to perform the closed-loop operation of readout, processing, and control within 1% of the qubit coherence time. In this paper, we present low-latency readout electronics for dynamic superconducting quantum computing. The readout electronics use a low-latency analog-to-digital converter to capture analog signals, a field-programmable gate array (FPGA) to process digital signals, and the general I/O resources of the FPGA to forward the readout results. Running an algorithm based on the design of multichannel parallelism and single instruction multiple data on an FPGA, the readout electronics achieve a readout latency of 40 ns from the last sample input to the readout valid output. The feedback data link for cross-instrument communication shows a communication latency of 48 ns when 16 bits of data are transmitted over a 2 m-length cable using a homologous clock to drive the transceiver. With codeword-based triggering mechanisms, readout electronics can be used in dynamic superconducting quantum computing.
This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.
Measuring a qubit state is a fundamental yet error-prone operation in quantum computing. These errors can arise from various sources, such as crosstalk, spontaneous state transitions, and excitations caused by the readout pulse. Here, we utilize an integrated approach to deploy neural networks onto field-programmable gate arrays (FPGA). We demonstrate that implementing a fully connected neural network accelerator for multi-qubit readout is advantageous, balancing computational complexity with low latency requirements without significant loss in accuracy. The neural network is implemented by quantizing weights, activation functions, and inputs. The hardware accelerator performs frequency-multiplexed readout of five superconducting qubits in less than 50 ns on a radio frequency system on chip (RFSoC) ZCU111 FPGA, marking the advent of RFSoC-based low-latency multi-qubit readout using neural networks. These modules can be implemented and integrated into existing quantum control and readout platforms, making the RFSoC ZCU111 ready for experimental deployment.
Quantum computers will be a revolutionary extension of the heterogeneous computing world. They consist of many quantum bits (qubits) and require a careful design of the interface between the classical computer architecture and the quantum processor. For example, even single nanosecond variations of the interaction may have an influence on the quantum state. Designing a tailored interface electronics is therefore a major challenge, both in terms of signal integrity with respect to single channels, as well as the scaling of the signal count. We developed such an interface electronics, an RFSoC-based qubit control system called QiController. In this article, we present the modular FPGA firmware design of our system. It features so-called digital unit cells, or QiCells. Each cell contains all the logic necessary to interact with a single superconducting qubit, including a custom-built RISC-V-based sequencer. Synchronization and data exchange between the cells is facilitated using a special star-point structure. Versatile routing and frequency-division multiplexing of generated signals between QiCells and converters are also supported. High-level programmability is provided using a custom Python-based description language and an associated compiler. We furthermore provide the resource utilization of our design and demonstrate its correct operation using an actual superconducting five-qubit chip.