Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Geoscience and Remote Sensing Symposium (IGARSS)

Remote Sensing with Use of Coherent Parametric Quantum Amplifiers

Prem Kumar, Gregory S. Kanter

Published Jul 16, 2023• 0 citations
Publisher

Abstract

Optical amplifiers play a key role in a variety of optical communication and sensing applications. Their value in direct detection is in overcoming the thermal noise of the detector which can lead to significant improvements in sensitivity. However, even highly sensitive coherent detection can benefit from amplifiers that help to overcome loss and detector inefficiencies thereby improving sensitivity. While almost all optical amplifiers in use are of the phase-insensitive type, which must add noise due to quantum mechanical constraints, phase sensitive amplifiers can be nearly noise-less. Significant strides have recently been made in using phase sensitive amplifiers to realize highly sensitive receivers for use in communication applications. We consider the issues and advantages of using such amplifiers for applications in sensing.

DOI
10.1109/igarss52108.2023.10281818

Related papers

Quantum enhancement of a coherent ladar receiver using phase-sensitive amplification

Peter A. Wasilousky, Kevin H. Smith, Ryan T. Glasser +25 more

We demonstrate a balanced-homodyne LADAR receiver employing a phase-sensitive amplifier (PSA) to raise the effective photon detection efficiency (PDE) to nearly 100%. Since typical LADAR receivers suffer from losses in the receive optical train that routinely limit overall PDE to less than 50% thus degrading SNR, PSA can provide significant improvement through amplification with noise figure near 0 dB. Receiver inefficiencies arise from sub-unity quantum efficiency, array fill factors, signal-local oscillator mixing efficiency (in coherent receivers), etc. The quantum-enhanced LADAR receiver described herein is employed in target discrimination scenarios as well as in imaging applications. We present results showing the improvement in detection performance achieved with a PSA, and discuss the performance advantage when compared to the use of a phase-insensitive amplifier, which cannot amplify noiselessly.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 30, 2011•10 citations

Quantum Interferometer Combining Squeezing and Parametric Amplification

Xiaojie Zuo, Zhihui Yan, Yanni Feng +4 more

High precision interferometers are the building blocks of precision metrology and the ultimate interferometric sensitivity is limited by the quantum noise. Here, we propose and experimentally demonstrate a compact quantum interferometer involving two optical parametric amplifiers and the squeezed states generated within the interferometer are directly used for the phase-sensing quantum state. By both squeezing shot noise and amplifying phase-sensing intensity the sensitivity improvement of 4.86±0.24 dB beyond the standard quantum limit is deterministically realized and a minimum detectable phase smaller than that of all present interferometers under the same phase-sensing intensity is achieved. This interferometric system has significantly potential applications in a variety of measurements for tiny variances of physical quantities.

arXiv:2005.01911•Physical Review Letters•May 1, 2020•81 citations

Reduction of quantum noise in optical parametric amplification

Juan Ariel Levenson, Philippe Grangier, Izo I. Abram +1 more

We experimentally demonstrate that a type-II pulsed optical parametric amplifier operated in a phase-insensitive configuration works as a near-perfect classical optical amplifier whose noise figure approaches 3 dB at high gains. We further demonstrate that, when operated in a phase-sensitive configuration, this amplifier works as a quantum-optical amplifier whose noise figure goes below 3 dB and approaches 0 dB at high gains. The noise figure of 1.45 ± 0.2 dB, measured for a gain of 9 dB, is clearly in the quantum regime.

Journal of the Optical Society of America B•Nov 1, 1993•168 citations

Fiber-based phase-sensitive optical amplifiers and their applications

Peter A. Andrekson, Magnus Karlsson

Optical parametric amplifiers rely on second-order susceptibility (three-wave mixing) or third-order susceptibility (four-wave mixing) in a nonlinear process where the energy of incoming photons is not changed (elastic scattering). In the latter case, two pump photons are converted to a signal and to an idler photon. Under certain conditions, related to the phase evolution of the waves involved, this conversion can be very efficient, resulting in large amplification of an input signal. As the nonlinear process can be very fast, all-optical applications aside from pure amplification are also possible. If the amplifier is implemented in an optical input-phase-sensitive manner, it is possible to amplify a signal wave without excess noise, i.e., with a noise figure of 0 dB. In this paper, we will provide the fundamental concepts and theory of such amplifiers, with a focus on their implementation in highly nonlinear optical fibers relying on four-wave mixing. We will discuss the distinctions between phase-insensitive and phase-sensitive operation and include several experimental results to illustrate their capability. Different applications of parametric amplifiers are also discussed, including their use in optical communication links.

Advances in Optics and Photonics•Feb 20, 2020•102 citations

Opportunities and Challenges in Quantum-Enhanced Optical Target Detection

Han Liu, Amr S. Helmy

The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.

ACS Photonics•Mar 6, 2025•4 citations

Ultralow-noise preamplified optical receiver using conventional single-wavelength transmission

Rasmus Larsson, Ruwan U. Weerasuriya, Peter A. Andrekson

Conventional optical amplifiers that use stimulated emission suffer from the generation of excess noise, thus limiting the performance in many applications. The phase-sensitive optical parametric amplifier, relying on the use of a nonlinear material for amplification, is an exception that can approach a noise figure of 0 dB. Its implementation in optical communication links has, however, been cumbersome due to increased complexity both in the transmitter and the receiver, effectively limiting the use of such amplifiers in practice. Here, we propose and demonstrate an implementation of a transmission system with exceptional performance in terms of receiver sensitivity (0.9 photons per bit) using a standalone ultralow-noise phase-sensitively preamplified receiver and a conventional single-wave optical transmitter. This is a significant simplification compared to previous demonstrations and can transform such amplifiers from a curiosity to practical use for example in deep-space-to-earth communication links.

Optica•Oct 3, 2024•9 citations
Optical amplifiers play a key role in a variety of optical communication and sensing applications. Their value in direct detection is in overcoming the thermal noise of the detector which can lead to significant improvements in sensitivity. However, even highly sensitive coherent detection can benefit from amplifiers that help to overcome loss and detector inefficiencies thereby improving sensitivity. While almost all optical amplifiers in use are of the phase-insensitive type, which must add noise due to quantum mechanical constraints, phase sensitive amplifiers can be nearly noise-less. Significant strides have recently been made in using phase sensitive amplifiers to realize highly sensitive receivers for use in communication applications. We consider the issues and advantages of using such amplifiers for applications in sensing.
We demonstrate a balanced-homodyne LADAR receiver employing a phase-sensitive amplifier (PSA) to raise the effective photon detection efficiency (PDE) to nearly 100%. Since typical LADAR receivers suffer from losses in the receive optical train that routinely limit overall PDE to less than 50% thus degrading SNR, PSA can provide significant improvement through amplification with noise figure near 0 dB. Receiver inefficiencies arise from sub-unity quantum efficiency, array fill factors, signal-local oscillator mixing efficiency (in coherent receivers), etc. The quantum-enhanced LADAR receiver described herein is employed in target discrimination scenarios as well as in imaging applications. We present results showing the improvement in detection performance achieved with a PSA, and discuss the performance advantage when compared to the use of a phase-insensitive amplifier, which cannot amplify noiselessly.
High precision interferometers are the building blocks of precision metrology and the ultimate interferometric sensitivity is limited by the quantum noise. Here, we propose and experimentally demonstrate a compact quantum interferometer involving two optical parametric amplifiers and the squeezed states generated within the interferometer are directly used for the phase-sensing quantum state. By both squeezing shot noise and amplifying phase-sensing intensity the sensitivity improvement of 4.86±0.24 dB beyond the standard quantum limit is deterministically realized and a minimum detectable phase smaller than that of all present interferometers under the same phase-sensing intensity is achieved. This interferometric system has significantly potential applications in a variety of measurements for tiny variances of physical quantities.
We experimentally demonstrate that a type-II pulsed optical parametric amplifier operated in a phase-insensitive configuration works as a near-perfect classical optical amplifier whose noise figure approaches 3 dB at high gains. We further demonstrate that, when operated in a phase-sensitive configuration, this amplifier works as a quantum-optical amplifier whose noise figure goes below 3 dB and approaches 0 dB at high gains. The noise figure of 1.45 ± 0.2 dB, measured for a gain of 9 dB, is clearly in the quantum regime.
Optical parametric amplifiers rely on second-order susceptibility (three-wave mixing) or third-order susceptibility (four-wave mixing) in a nonlinear process where the energy of incoming photons is not changed (elastic scattering). In the latter case, two pump photons are converted to a signal and to an idler photon. Under certain conditions, related to the phase evolution of the waves involved, this conversion can be very efficient, resulting in large amplification of an input signal. As the nonlinear process can be very fast, all-optical applications aside from pure amplification are also possible. If the amplifier is implemented in an optical input-phase-sensitive manner, it is possible to amplify a signal wave without excess noise, i.e., with a noise figure of 0 dB. In this paper, we will provide the fundamental concepts and theory of such amplifiers, with a focus on their implementation in highly nonlinear optical fibers relying on four-wave mixing. We will discuss the distinctions between phase-insensitive and phase-sensitive operation and include several experimental results to illustrate their capability. Different applications of parametric amplifiers are also discussed, including their use in optical communication links.
The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.
Conventional optical amplifiers that use stimulated emission suffer from the generation of excess noise, thus limiting the performance in many applications. The phase-sensitive optical parametric amplifier, relying on the use of a nonlinear material for amplification, is an exception that can approach a noise figure of 0 dB. Its implementation in optical communication links has, however, been cumbersome due to increased complexity both in the transmitter and the receiver, effectively limiting the use of such amplifiers in practice. Here, we propose and demonstrate an implementation of a transmission system with exceptional performance in terms of receiver sensitivity (0.9 photons per bit) using a standalone ultralow-noise phase-sensitively preamplified receiver and a conventional single-wave optical transmitter. This is a significant simplification compared to previous demonstrations and can transform such amplifiers from a curiosity to practical use for example in deep-space-to-earth communication links.