Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Oxford University Press eBooks

Microwave resonators for superconducting devices

Riccardo Manenti, Mário Motta

Published Aug 25, 2023• 0 citations
Publisher

Abstract

Abstract In this chapter, we present microwave resonators, one of the two main elements composing a quantum computer based on superconducting devices. We describe planar microwave resonators and introduce their classical modeling as RLC circuits. We introduce transmission lines coupled to microwave resonators and explore the dependence of the transmission coefficient on temperature and power. We then describe how to drive a microwave resonator with an electromagnetic pulse. In the last part of the chapter, we model a microwave resonator as a quantum harmonic oscillation and discuss photon losses with a master equation

DOI
10.1093/oso/9780198787488.003.0013

Related papers

Microwave Resonators and Filters

Daniel E. Oates

The surface resistance of superconductors at microwave frequencies can be as much as three orders of magnitude lower than the best normal metals such as copper, even at comparably low temperatures. This leads to resonators and filters with very low dissipation. This chapter addresses more recent developments in filter applications. Most superconducting filters are implemented with coupled resonators. Thus, the resonator is basic to both filter and resonator applications. Coupling the resonator to the external environment is an essential consideration in order to drive the circuit and measure its properties. Superconducting resonators are usually one of two types either planar, or three dimensional most often implemented as dielectric resonators. The simplest planar resonators are pieces of transmission line open or shorted at the ends one-half of the electromagnetic wavelength in length, so-called λ/2 resonators. Dielectric resonators are three-dimensional cavities partially or fully filled with a low-loss dielectric material.

CRC Press eBooks•May 17, 2022•5 citations

Qubit Design for a Superconducting Quantum Computer

David Wohlgemuth

The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.

The UNSW Canberra at ADFA Journal of Undergraduate Engineering Research•Dec 19, 2018•0 citations

Resonant and off-resonant microwave signal manipulation in coupled superconducting resonators

M. Pierre, Sankar Raman Sathyamoorthy, Ida-Maria Svensson +2 more

We present an experimental demonstration as well as a theoretical model of an integrated circuit designed for the manipulation of a microwave field down to the single-photon level. The device is made of a superconducting resonator coupled to a transmission line via a second frequency-tunable resonator. The tunable resonator can be used as a tunable coupler between the fixed resonator and the transmission line. Moreover, the manipulation of the microwave field between the two resonators is possible. In particular, we demonstrate the swapping of the field from one resonator to the other by pulsing the frequency detuning between the two resonators. The behavior of the system, which determines how the device can be operated, is analyzed as a function of one key parameter of the system, the damping ratio of the coupled resonators. We show a good agreement between experiments and simulations, realized by solving a set of coupled differential equations.

arXiv:1802.09034•Physical review. B./Physical review. B•Mar 22, 2019•18 citations

Coplanar waveguide resonators for circuit quantum electrodynamics

M. Göppl, A. Fragner, Matthias Baur +7 more

High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.

arXiv:0807.4094•Journal of Applied Physics•Dec 1, 2008•402 citations

A brief review on recent developments of superconducting microwave resonators for quantum device application

Yonuk Chong

Quantum information processing using superconducting qubit based on Josephson junction has become one of the most promising candidates for possible realization of a quantum computer. In the heart of the qubit circuits, the superconducting microwave resonator plays a key role in quantum operations and measurements, which enables single-photon level microwave quantum optics. During last decade, the coherence time, or the lifetime of the quantum state, of the superconducting qubit has been dramatically improved. Among several technological innovations, the improvement of superconducting microwave resonator's quality has been the main driving force in getting the qubit performance almost ready for elementary quantum computing architecture. In this paper, I will briefly review very recent progresses of the superconducting microwave resonators especially aimed for quantum device applications during the last decade. The progresses have been driven by ingenious circuit design, material improvement, and new measurement techniques. Even a rather radical idea of three-dimensional large resonators have been successfully implemented in a qubit circuit. All those efforts contributed to our understanding of the qubit decoherence mechanism and as a result to the improvement of qubit performance.

Progress in Superconductivity and Cryogenics•Dec 31, 2014•0 citations

Fabrication and Characterization of Superconducting Resonators

Giuseppe Cataldo, Emily M. Barrentine, Ari-David Brown +3 more

Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.

Journal of Visualized Experiments•May 21, 2016•3 citations
Abstract In this chapter, we present microwave resonators, one of the two main elements composing a quantum computer based on superconducting devices. We describe planar microwave resonators and introduce their classical modeling as RLC circuits. We introduce transmission lines coupled to microwave resonators and explore the dependence of the transmission coefficient on temperature and power. We then describe how to drive a microwave resonator with an electromagnetic pulse. In the last part of the chapter, we model a microwave resonator as a quantum harmonic oscillation and discuss photon losses with a master equation
The surface resistance of superconductors at microwave frequencies can be as much as three orders of magnitude lower than the best normal metals such as copper, even at comparably low temperatures. This leads to resonators and filters with very low dissipation. This chapter addresses more recent developments in filter applications. Most superconducting filters are implemented with coupled resonators. Thus, the resonator is basic to both filter and resonator applications. Coupling the resonator to the external environment is an essential consideration in order to drive the circuit and measure its properties. Superconducting resonators are usually one of two types either planar, or three dimensional most often implemented as dielectric resonators. The simplest planar resonators are pieces of transmission line open or shorted at the ends one-half of the electromagnetic wavelength in length, so-called λ/2 resonators. Dielectric resonators are three-dimensional cavities partially or fully filled with a low-loss dielectric material.
The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.
We present an experimental demonstration as well as a theoretical model of an integrated circuit designed for the manipulation of a microwave field down to the single-photon level. The device is made of a superconducting resonator coupled to a transmission line via a second frequency-tunable resonator. The tunable resonator can be used as a tunable coupler between the fixed resonator and the transmission line. Moreover, the manipulation of the microwave field between the two resonators is possible. In particular, we demonstrate the swapping of the field from one resonator to the other by pulsing the frequency detuning between the two resonators. The behavior of the system, which determines how the device can be operated, is analyzed as a function of one key parameter of the system, the damping ratio of the coupled resonators. We show a good agreement between experiments and simulations, realized by solving a set of coupled differential equations.
High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.
Quantum information processing using superconducting qubit based on Josephson junction has become one of the most promising candidates for possible realization of a quantum computer. In the heart of the qubit circuits, the superconducting microwave resonator plays a key role in quantum operations and measurements, which enables single-photon level microwave quantum optics. During last decade, the coherence time, or the lifetime of the quantum state, of the superconducting qubit has been dramatically improved. Among several technological innovations, the improvement of superconducting microwave resonator's quality has been the main driving force in getting the qubit performance almost ready for elementary quantum computing architecture. In this paper, I will briefly review very recent progresses of the superconducting microwave resonators especially aimed for quantum device applications during the last decade. The progresses have been driven by ingenious circuit design, material improvement, and new measurement techniques. Even a rather radical idea of three-dimensional large resonators have been successfully implemented in a qubit circuit. All those efforts contributed to our understanding of the qubit decoherence mechanism and as a result to the improvement of qubit performance.
Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.