Hybridizing squeezed states technique with quantum back-action nullifying meter improves the force sensitivity of the optomechanical interferometer to e−r e f f F s q l . Where r eff = r + 0.5 ln(4∆/ζ) with r as squeezing parameter, ζ as cavity decay rate and ∆ is the cavity detuning.
Application of frequency-dependent squeezed vacuum improves the force sensitivity of an optomechanical interferometer beyond the standard quantum limit by a factor of e − r , where r is the squeezing parameter. In this work, we show that the application of squeezed light along with quantum back-action nullifying meter in an optomechanical cavity with mechanical mirror in middle configuration can enhance the sensitivity beyond the standard quantum limit by a factor of e − r eff , where r eff = r + ln(4Δ/ ζ )/2, for 0 < ζ /Δ < 1, with ζ as the optomechanical cavity decay rate and Δ as the detuning between cavity eigenfrequency and driving field. The technique described in this work is restricted to frequencies much smaller than the resonance frequency of the mechanical mirror. We further studied the sensitivity as a function of temperature, mechanical mirror reflectivity, and input laser power.
We theoretically investigate quantum measurement noise in a hybrid optomechanical system, focusing on radiation pressure back action and its impact on force sensing. The setup consists of an optomechanical cavity with a movable mirror, a fixed semi transparent mirror, an ensemble of quantum dots (QD) coupled to the cavity mode, and an intracavity optical parametric amplifier (OPA). We show how the QD induced response, together with the system nonlinearity, modifies the noise spectral density and thereby improves the force measurement sensitivity. In this setup, coherent quantum noise cancellation (CQNC) can completely remove the back action noise. In addition, increasing the OPA pump gain enables sensitivity beyond the standard quantum limit (SQL) at reduced laser power. These combined effects allow weak force sensing beyond the SQL.
We propose a new, to the best of our knowledge, method to overcome quantum back-action in a measurement process using oscillators. An optical oscillator is used as a meter to measure the parameters of another open oscillator. The optical oscillator is synthesized such that the optical restoring force counters any perturbations induced by the quantum back-action phenomena. As a result, it is shown that the quantum back-action in continuous measurement is suppressed in the low frequency regime, i.e., for frequencies much smaller than the resonance frequency of the open oscillator. As the meter plays the role of measuring parameters as well as suppressing the quantum back-action, we call it a quantum back-action nullifying meter. As an application of this method, synthesis of the quantum back-action nullifying optical oscillator for suppressing radiation pressure force noise in linear and non-linear optomechanics is described.
We investigate the reduction of measurement-added noise in force sensing by analyzing its power spectral density (PSD) within a hybrid optomechanical system. The setup is comprised of an optomechanical cavity equipped with a movable mirror which acts as the mechanical oscillator, a stationary semi-transparent mirror, a superconducting qubit, and an optical parametric amplifier (OPA). By utilizing the concept of coherent quantum noise cancellation (CQNC), we derive the conditions necessary for complete cancellation of back-action force, thereby enhancing force sensitivity. Furthermore, with the gradual increase in the OPA pump gains, we suppress the sensitivity beyond the standard quantum limit (SQL) at a lower value of laser power. The removal of back-action noise, along with the reduction of shot noise, improves force detection capabilities, thereby surpassing the standard quantum limit associated with weak force detection.
Cavity optomechanical systems have emerged as a promising platform for quantum sensing. Quantum mechanics imposes a standard quantum limit (SQL) on the force-sensitivity for the standard homodyne phase quadrature measurement of the cavity's output field. In this paper, we investigate ways to enhance weak force sensitivity beyond SQL by employing a variational homodyne quadrature readout and quantum squeezing. Our study reveals a remarkable improvement in the force sensitivity of a cavity optomechanical sensor at a suitable homodyne angle, compared with standard phase quadrature detection of the cavity output field within a specific frequency band. We further demonstrate improved force sensitivity via intra-cavity squeezing (ICS) or injected external squeezing (IES) of the cavity mode. Both variational homodyne readout and quantum squeezing induce quantum correlations between the amplitude and phase quadratures of the cavity's output field, thereby improving force sensitivity. Our results suggest that IES is preferable to ICS for sub-SQL force sensing with system stability and lower probe power requirements. The squeezing-enhanced variational homodyne detection scheme can enable high-precision quantum sensing across various hybrid quantum platforms.
The shot-noise limited peak sensitivity of cavity-enhanced interferometric measurement devices, such as gravitational-wave detectors, can be improved by increasing the cavity finesse, even when comparing fixed intracavity light powers. For a fixed light power inside the detector, this comes at the price of a proportional reduction in the detection bandwidth. High sensitivity over a large span of signal frequencies, however, is essential for astronomical observations. It is possible to overcome this standard sensitivity-bandwidth limit using nonclassical correlations in the light field. Here, we investigate the internal squeezing approach, where the parametric amplification process creates a nonclassical correlation directly inside the interferometer cavity. We theoretically analyze the limits of the approach and measure 36% increase in the sensitivity-bandwidth product compared to the classical case. To our knowledge, this is the first experimental demonstration of an improvement in the sensitivity-bandwidth product using internal squeezing, opening the way for a new class of optomechanical force sensing devices.