Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Noise Types in Correlation-Based Target Detection

Vladimir V. Kornienko, Ilkka Juhani Tittonen

Published Jun 26, 2023• 0 citations
Publisher

Abstract

Quantum illumination (QI) [1] is a general name for a class of target detection protocols, where an entangled state is used to illuminate a region of space where a reflecting target may be present. Storing part of the state and sending the other part to the target, QI can suppress the sources of uncorrelated noise by using the correlations in frequency, phase, and arrival time between the stored state and the target return state [2], [3]. This alleviates the task of detecting a weakly reflecting target against a strong background [4]. After initial proposal based on the entangled photon pairs, QI has been extended [5] to the case of Gaussian states, which are easier to prepare and manipulate.

DOI
10.1109/cleo/europe-eqec57999.2023.10231526

Related papers

Quantum Illumination Advantage for Classification Among an Arbitrary Library of Targets

Ali Cox, Quntao Zhuang, Jeffrey H. Shapiro +1 more

Quantum illumination (QI) is the task of querying a scene using a transmitter probe whose quantum state is entangled with a reference beam retained in ideal storage, followed by optimally detecting the target-returned light together with the stored reference, to make decisions on characteristics of targets at stand-off range, at precision that exceeds what is achievable with a classical transmitter of the same brightness and otherwise identical conditions. Using tools from perturbation theory, we show that in the limit of low transmitter brightness, high loss, and high thermal background, there is a factor of four improvement in the Chernoff exponent of the error probability in discriminating any number of apriori-known reflective targets when using a Gaussian-state entangled QI probe, over using classical coherent-state illumination (CI). While this advantage was known for detecting the presence or absence of a target, it had not been proven for the generalized task of discriminating between arbitrary target libraries. In proving our result, we derive simple general analytic expressions for the lowest-order asymptotic expansions of the quantum Chernoff exponents for QI and CI in terms of the signal brightness, loss, thermal noise, and the modal expansion coefficients of the target-reflected light's radiant exitance profiles when separated by a spatial mode sorter after entering the entrance pupil of the receiver's aperture.

arXiv:2408.13489•IEEE International Symposium on Information Theory (ISIT)•Jul 7, 2024•3 citations

Fundamental limits of quantum illumination

Ranjith Nair, Mile Gu

In quantum illumination (QI), a signal beam initially entangled with an idler beam held at the receiver interrogates a target region bathed in thermal background light. The returned beam is measured jointly with the idler in order to determine whether a weakly reflecting target is present. Using tools from quantum information theory, we derive lower bounds on the average error probability of detecting both specular and fading targets and on the mean squared error of estimating the reflectance of a detected target, which are obeyed by any QI transmitter satisfying a signal energy constraint. For bright thermal backgrounds, we show that the QI system using multiple copies of low-brightness two-mode squeezed vacuum states is nearly optimal. More generally, our results place limits on the best possible performance achievable using QI systems at all wavelengths, and at all signal and background noise levels.

arXiv:2002.12252•Optica•Jun 11, 2020•85 citations

Quantum Illumination: A Laboratory Investigation

Bhashyam Balaji, Duncan G. England

Quantum illumination is an idea for detection of targets in the presence of a noisy background using a photon pair that is entangled in some degree of freedom, such as frequency. This paper provides a simple and illustrative proof-of-concept setup of a quantum illumination investigation. Detection and imaging is investigated in the optical regime using a correlated source and the performance of classical illumination and quantum illumination are compared for detection and imaging experiments. The quantum advantage is demonstrated in the acquired data and possible application spaces and technological requirements are identified for developing practical systems.

IEEE International Carnahan Conference on Security Technology (ICCST)•Oct 1, 2018•19 citations

Quantum illumination radar with entangled coherent states

Zhiwei Tao, Yi-Chong Ren, Azezigul Abdukirim +2 more

There has been a great interest in quantum metrology (e.g., quantum interferometric radar) due to its applications in sub-Rayleigh ranging and remote sensing. Despite interferometric radar has received vast amount of attentions over the past two decades, very few researches has been conducted on another type of quantum radar: quantum illumination radar, or more precisely quantum target detection. It is, in general, used to interrogate whether the low-reflectivity target in a noisy thermal bath is existed using quantum light. The entanglement properties of its emitted light source give it a unique detection advantage over the classical radar. Entangled coherent state (ECS), as a class of quantum states with high entanglement robustness in noisy environments, has been widely used in several fields of quantum science such as quantum informatics, quantum metrology . In this paper, we investigate the target detection performance of quantum illumination radar based on three different types of ECS states. We employ the two-mode squeezed vacuum state (TMSV) and the coherent state as benchmarks to compare and analyze the relationship between the entanglement strength of the three types of ECS states and their quantum illumination detection performance. We found that the detection performance of the three ECS states is better than that of the coherent state. However, it is inferior to that of the TMSV state when the target is of low reflectivity. The emitted photon number is much smaller than the background noise (we call this as “good” illumination conditions). On the contrary, quantum illumination radar has no obvious advantage over coherent state radar for target detection under other illumination conditions; further, the detection performance of these three types of ECS states is not evidently related to that of the TMSV state and the coherent state. Finally, we reveal that the target detection performance of quantum illumination for the first two types of ECS states can be determined by their entanglement strength under “good” illumination conditions by adjusting the inter-modal phase of these two ECS states while keeping the emitted photon number constant. Under other illumination conditions, there is no evidence to demonstrate the entanglement strength of ECS states being associated with their target detection performance.

Acta Physica Sinica•Jan 1, 2021•4 citations

The Hilbert Schmidt inner product, quantum illumination, and beyond

Shannon M. Ray, Paul M. Alsing

Quantum Illumination (QI)1 is a proposed remote targeting protocol using entangled states in which the experimenter sends a signal towards an expected target in a noisy environment that has a probability of reflecting off the surface or, in the case of no surface, being lost. Upon return, the noisy signal is jointly measured with the idler, which has been held in local memory, to determine if the surface has been detected. The idler effectively increases the brightness of the noisy signal to help distinguish it from the surrounding noise. Even though the returned mixed state is in the un-entangled regime, it has been shown that QI outperforms a conventional protocol that only sends separable states as the signal. We analyzed QI as a quantum channel discrimination protocol and circumvented computational issues that rely on diagonalization of the quantum states by using the normalized Hilbert-Schmidt (NH-S) inner product as a measure of state distinguishability.2 Because the NH-S inner product is simple to compute, for a choice of entangled pure state and bipartition, we were able to rank the performance of QI entirely in terms of the dimension of the composite Hilbert space and the purity of the idler subsystem. We also showed that the greatest advantage gained by quantum illumination over conventional illumination occurs when one uses a Bell state, and for a fixed dimension d, the optimal performance of QI is achieved when the purity of the idler subsystem is minimal. In this talk, we review the results of,2 and present our progress on extending this analysis to a broader class of quantum information protocols beyond QI.

•Sep 19, 2019•1 citation

Enhanced quantum illumination of a lossy target: A sequential interaction model

Shilpi Srivastava, Shubhrangshu Dasgupta

Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.

quant-pharXiv:2604.12381•Apr 15, 2026•0 citations
Quantum illumination (QI) [1] is a general name for a class of target detection protocols, where an entangled state is used to illuminate a region of space where a reflecting target may be present. Storing part of the state and sending the other part to the target, QI can suppress the sources of uncorrelated noise by using the correlations in frequency, phase, and arrival time between the stored state and the target return state [2], [3]. This alleviates the task of detecting a weakly reflecting target against a strong background [4]. After initial proposal based on the entangled photon pairs, QI has been extended [5] to the case of Gaussian states, which are easier to prepare and manipulate.
Quantum illumination (QI) is the task of querying a scene using a transmitter probe whose quantum state is entangled with a reference beam retained in ideal storage, followed by optimally detecting the target-returned light together with the stored reference, to make decisions on characteristics of targets at stand-off range, at precision that exceeds what is achievable with a classical transmitter of the same brightness and otherwise identical conditions. Using tools from perturbation theory, we show that in the limit of low transmitter brightness, high loss, and high thermal background, there is a factor of four improvement in the Chernoff exponent of the error probability in discriminating any number of apriori-known reflective targets when using a Gaussian-state entangled QI probe, over using classical coherent-state illumination (CI). While this advantage was known for detecting the presence or absence of a target, it had not been proven for the generalized task of discriminating between arbitrary target libraries. In proving our result, we derive simple general analytic expressions for the lowest-order asymptotic expansions of the quantum Chernoff exponents for QI and CI in terms of the signal brightness, loss, thermal noise, and the modal expansion coefficients of the target-reflected light's radiant exitance profiles when separated by a spatial mode sorter after entering the entrance pupil of the receiver's aperture.
In quantum illumination (QI), a signal beam initially entangled with an idler beam held at the receiver interrogates a target region bathed in thermal background light. The returned beam is measured jointly with the idler in order to determine whether a weakly reflecting target is present. Using tools from quantum information theory, we derive lower bounds on the average error probability of detecting both specular and fading targets and on the mean squared error of estimating the reflectance of a detected target, which are obeyed by any QI transmitter satisfying a signal energy constraint. For bright thermal backgrounds, we show that the QI system using multiple copies of low-brightness two-mode squeezed vacuum states is nearly optimal. More generally, our results place limits on the best possible performance achievable using QI systems at all wavelengths, and at all signal and background noise levels.
Quantum illumination is an idea for detection of targets in the presence of a noisy background using a photon pair that is entangled in some degree of freedom, such as frequency. This paper provides a simple and illustrative proof-of-concept setup of a quantum illumination investigation. Detection and imaging is investigated in the optical regime using a correlated source and the performance of classical illumination and quantum illumination are compared for detection and imaging experiments. The quantum advantage is demonstrated in the acquired data and possible application spaces and technological requirements are identified for developing practical systems.
There has been a great interest in quantum metrology (e.g., quantum interferometric radar) due to its applications in sub-Rayleigh ranging and remote sensing. Despite interferometric radar has received vast amount of attentions over the past two decades, very few researches has been conducted on another type of quantum radar: quantum illumination radar, or more precisely quantum target detection. It is, in general, used to interrogate whether the low-reflectivity target in a noisy thermal bath is existed using quantum light. The entanglement properties of its emitted light source give it a unique detection advantage over the classical radar. Entangled coherent state (ECS), as a class of quantum states with high entanglement robustness in noisy environments, has been widely used in several fields of quantum science such as quantum informatics, quantum metrology . In this paper, we investigate the target detection performance of quantum illumination radar based on three different types of ECS states. We employ the two-mode squeezed vacuum state (TMSV) and the coherent state as benchmarks to compare and analyze the relationship between the entanglement strength of the three types of ECS states and their quantum illumination detection performance. We found that the detection performance of the three ECS states is better than that of the coherent state. However, it is inferior to that of the TMSV state when the target is of low reflectivity. The emitted photon number is much smaller than the background noise (we call this as “good” illumination conditions). On the contrary, quantum illumination radar has no obvious advantage over coherent state radar for target detection under other illumination conditions; further, the detection performance of these three types of ECS states is not evidently related to that of the TMSV state and the coherent state. Finally, we reveal that the target detection performance of quantum illumination for the first two types of ECS states can be determined by their entanglement strength under “good” illumination conditions by adjusting the inter-modal phase of these two ECS states while keeping the emitted photon number constant. Under other illumination conditions, there is no evidence to demonstrate the entanglement strength of ECS states being associated with their target detection performance.
Quantum Illumination (QI)1 is a proposed remote targeting protocol using entangled states in which the experimenter sends a signal towards an expected target in a noisy environment that has a probability of reflecting off the surface or, in the case of no surface, being lost. Upon return, the noisy signal is jointly measured with the idler, which has been held in local memory, to determine if the surface has been detected. The idler effectively increases the brightness of the noisy signal to help distinguish it from the surrounding noise. Even though the returned mixed state is in the un-entangled regime, it has been shown that QI outperforms a conventional protocol that only sends separable states as the signal. We analyzed QI as a quantum channel discrimination protocol and circumvented computational issues that rely on diagonalization of the quantum states by using the normalized Hilbert-Schmidt (NH-S) inner product as a measure of state distinguishability.2 Because the NH-S inner product is simple to compute, for a choice of entangled pure state and bipartition, we were able to rank the performance of QI entirely in terms of the dimension of the composite Hilbert space and the purity of the idler subsystem. We also showed that the greatest advantage gained by quantum illumination over conventional illumination occurs when one uses a Bell state, and for a fixed dimension d, the optimal performance of QI is achieved when the purity of the idler subsystem is minimal. In this talk, we review the results of,2 and present our progress on extending this analysis to a broader class of quantum information protocols beyond QI.
Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.