Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE/ACM International Workshop on Quantum Software Engineering (Q-SE)

Dynamic Output State Classification for Quantum Computers

Héctor D. Menéndez, Luciano Bello, David Clark

Published May 1, 2023• 3 citations
Publisher

Abstract

Quantum computers promise a potentially disruptive approach to improving computation in fields such as physics, chemistry, cryptography, optimisation, and machine learning. However, testing quantum computations for faults is currently impractical because of the existence of noise and errors associated with the output. Executing in a quantum system a circuit with only a few valid output states can generate a significant number of implausible states that have zero probability in an ideal computation. Among other sources of noise, readout errors come from the difficulty of discriminating a measurement between 0 and 1 for the different qubits. These issues are affected by readout drift, requiring regular recalibration of the process. In this paper, we provide a novel technique for post-computation analysis of the output probability distributions that permits better discrimination of kerneled data, delaying the need for recalibration. We achieve this by altering the linear discrimination of the final output states by way of a dynamic state selection process that combines Gaussian mixture models with a probability threshold. As an initial assessment of the technique we examine its effect on three to five qubits GHZ states. Our results on almost every one of nine IBM quantum computers show that the number of implausible states is reduced significantly and that the resulting probability distribution is closer to the expected one.

DOI
10.1109/q-se59154.2023.00009

Related papers

Quantum Measurement Discrimination using Cumulative Distribution Functions

Zachery Utt, Daniel Volya, Prabhat Mishra

Quantum measurement is one of the critical steps in quantum computing that determines the probabilities associated with qubit states after conducting several circuit ex-ecutions and measurements. As a mesoscopic quantum system, real quantum computers are prone to noise. Therefore, a major challenge in quantum measurement is how to correctly inter-pret the noisy results of a quantum computer. While there are promising classification based solutions, they either produce incorrect results (misclassify) or require many measurements (expensive). In this paper, we present an efficient technique to estimate a qubit's state through analysis of probability distributions of post-measurement data. Specifically, we estimate the state of a qubit using cumulative distribution functions to compare the measured distribution of a sample with the distributions of basis states$\vert 0\rangle$and$\vert 1\rangle$. Our experimental results demonstrate a drastic reduction (78%) in single qubit readout error. It also provides significant reduction (12%) when used to boost existing multi-qubit discriminator models.

Design, Automation, and Test in Europe•Apr 1, 2023•7 citations

Test Data-Driven Machine Learning Models for Reliable Quantum Circuit Output

Vedika Saravanan, Samah Mohamed Saeed

While current quantum computers, referred to as Noisy Intermediate-Scale Quantum (NISQ) computers, are expected to be beneficial for different applications, they are prone to different types of errors. In order to enhance the reliability of quantum systems, noise-aware quantum compilers are used to generate physical quantum circuits to be executed on NISQ computers. The quantum hardware is calibrated very frequently and its error rates are computed accordingly. Based on the hardware error rates, a quantum compiler allocates physical qubits and schedules quantum operations. However, error rates may change post-calibration. To incorporate dynamic error rates into quantum circuit compilation with minimum cost, we propose a Machine Learning (ML)-based scheme to detect the incorrect output of the quantum circuit and predict the Probability of Successful Trials (PST) with high accuracy. Our approach can verify the error rates of the quantum hardware and validate the correctness of the extracted quantum circuit output. We provide a case study of our ML-based reliability models using IBM Q16 Melbourne quantum computer. Our results show that the proposed scheme achieves a very high prediction accuracy.

IEEE European Test Symposium (ETS)•May 24, 2021•9 citations

Quantum Measurement Classification Using Statistical Learning

Zachery Utt, Daniel Volya, Prabhat Mishra

Interpreting the results of a quantum computer can pose a significant challenge due to inherent noise in these mesoscopic quantum systems. Quantum measurement, a critical component of quantum computing, involves determining the probabilities linked with quantum states post-multiple circuit computations based on quantum readout values provided by hardware. While there are promising classification-based solutions, they can either misclassify or necessitate excessive measurements, thereby proving to be costly. This article puts forth an efficient method to discern the quantum state by analyzing the probability distributions of data post-measurement. Specifically, we employ cumulative distribution functions to juxtapose the measured distribution of a sample against the distributions of basis states. The efficacy of our approach is demonstrated through experimental results on a superconducting transmon qubit architecture, which shows a substantial decrease (88%) in single qubit readout error compared to state-of-the-art measurement techniques. Moreover, we report additional error reduction (12%) compared to state-of-the-art measurement techniques when our technique is applied to enhance existing multi-qubit classification techniques. We also demonstrate the applicability of our proposed method for higher dimensional quantum systems, including classification of single qutrits as well as multiple qutrits.

ACM Transactions on Quantum Computing•Feb 9, 2024•7 citations

Quantum-machine-learning channel discrimination

Andrey Kardashin, A. V. Vlasova, Anastasiia A. Pervishko +2 more

In the problem of quantum channel discrimination, one distinguishes between a given number of quantum channels, which is done by sending an input state through a channel and measuring the output state. This work studies applications of variational quantum circuits and machine-learning techniques for discriminating such channels. In particular, we explore (i) the practical implementation of embedding this task into the framework of variational quantum computing, (ii) training a quantum classifier based on variational quantum circuits, and (iii) applying the quantum kernel estimation technique. For testing these three channel discrimination approaches, we considered a pair of entanglement-breaking channels and the depolarizing channel with two different depolarization factors. For the approach (i), we address solving the quantum channel discrimination problem using widely discussed parallel and sequential strategies. We show the advantage of the latter in terms of better convergence with less quantum resources. Quantum channel discrimination with a variational quantum classifier (ii) allows one to operate even with random and mixed input states and simple variational circuits. The kernel-based classification approach (iii) is also found effective as it allows one to discriminate depolarizing channels associated not with just fixed values of the depolarization factor, but with ranges of it. Additionally, we discovered that a simple modification of one of the commonly used kernels significantly increases the efficiency of this approach. Finally, our numerical findings reveal that the performance of variational methods of channel discrimination depends on the trace of the product of the output states. These findings demonstrate that quantum machine learning can be used to discriminate channels, such as those representing physical noise processes.

arXiv:2206.09933•Physical Review A•Sep 7, 2022•16 citations

Time-series based quantum state discrimination

Samuel Jung, Neel Vora, Akel Hashim +2 more

Abstract Measurement errors in quantum computers are very detrimental to quantum computations. The ability to efficiently and accurately readout quantum states is crucial for quantum error correction schemes and quantum algorithms. Readout fidelity is typically limited by a poor signal-to-noise (SNR) ratio between the quantum states we intend to classify, as well as energy relaxation (e.g., $T_1$ decay) from an excited state to a lower state during readout. Superconducting quantum bits (qubit), one of the leading candidates for scalable quantum computing hardware, are particularly limited by energy relaxation due to their relatively short coherence times. While most approaches for classifying the results of readout on superconducting qubits typically utilize clustering algorithms (e.g., a Gaussian mixture model) on integrated readout signals, these cannot distinguish between a quantum bit that was in the ground state prior to measurement from a qubit that decays to the ground state during measurement. For this reason, we instead propose using machine learning (ML) on the raw (non-integrated) analog signal and classification models on the full time series data (i.e., the \emph{trajectory}). We observe that time series classification methods, such as our chosen long short-term memory (LSTM) model, in combination with filtering and feature engineering techniques, consistently outperform clustering models. In particular, we find that the largest improvements come from reclassifying points in the boundary regions between neighboring clusters. These boundary points correspond to measurement records that deviate from the typical cluster, likely due to transient or noisy features in the signal that are not captured when the data is integrated. By retaining temporal information, sequence-aware models such as LSTMs can better discriminate these trajectories, whereas clustering methods based on integrated values are more prone to misclassifications.

•Apr 13, 2026•0 citations

Discriminating Quantum States with Quantum Machine Learning

David Quiroga, Prasanna Date, Raphael C. Pooser

An important use-case for machine learning (ML) is that of determining readout results in quantum computers. In quantum computing (QC), classical ML models are currently being used to discriminate in-phase and quadrature (IQ) signal data to discriminate between quantum states, which is a fundamental QC operation. In our research we propose a Quantum K-Means (QK-Means) clustering technique to discriminate quantum states on the IBM Bogota quantum device, and compare its performance to the K-Means technique (its classical counterpart). We used both algorithms to perform a correlation analysis and probe cross-talk between couples of qubits on the device. We observed that QK-Means obtained test and training scores at par with the classical K-Means, and testing scores that were marginally lower than K-Means when the clusters weren’t visually separable. The training times for QK-Means were observed to be at par with an implementation of the K-Means that was not optimized. In this case, we concluded a weak correlation with a Pearson correlation coefficient of 0.2 on the (1, 2) and (2, 3) qubit couples. After analyzing the training scores, we also conclude that the 1 qubit has the worst performance at readout evidenced by the signal data not being visually separable and the low scores obtained on both clustering algorithms compared to the other qubits. Its poor performance is further verified by the calibration data showing a high readout error of 8,4%. This technique can be used to find correlations present in readout of quantum circuits and to determine cross-talk.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Oct 1, 2021•9 citations
Quantum computers promise a potentially disruptive approach to improving computation in fields such as physics, chemistry, cryptography, optimisation, and machine learning. However, testing quantum computations for faults is currently impractical because of the existence of noise and errors associated with the output. Executing in a quantum system a circuit with only a few valid output states can generate a significant number of implausible states that have zero probability in an ideal computation. Among other sources of noise, readout errors come from the difficulty of discriminating a measurement between 0 and 1 for the different qubits. These issues are affected by readout drift, requiring regular recalibration of the process. In this paper, we provide a novel technique for post-computation analysis of the output probability distributions that permits better discrimination of kerneled data, delaying the need for recalibration. We achieve this by altering the linear discrimination of the final output states by way of a dynamic state selection process that combines Gaussian mixture models with a probability threshold. As an initial assessment of the technique we examine its effect on three to five qubits GHZ states. Our results on almost every one of nine IBM quantum computers show that the number of implausible states is reduced significantly and that the resulting probability distribution is closer to the expected one.
Quantum measurement is one of the critical steps in quantum computing that determines the probabilities associated with qubit states after conducting several circuit ex-ecutions and measurements. As a mesoscopic quantum system, real quantum computers are prone to noise. Therefore, a major challenge in quantum measurement is how to correctly inter-pret the noisy results of a quantum computer. While there are promising classification based solutions, they either produce incorrect results (misclassify) or require many measurements (expensive). In this paper, we present an efficient technique to estimate a qubit's state through analysis of probability distributions of post-measurement data. Specifically, we estimate the state of a qubit using cumulative distribution functions to compare the measured distribution of a sample with the distributions of basis states∣0⟩\vert 0\rangle∣0⟩and∣1⟩\vert 1\rangle∣1⟩. Our experimental results demonstrate a drastic reduction (78%) in single qubit readout error. It also provides significant reduction (12%) when used to boost existing multi-qubit discriminator models.
While current quantum computers, referred to as Noisy Intermediate-Scale Quantum (NISQ) computers, are expected to be beneficial for different applications, they are prone to different types of errors. In order to enhance the reliability of quantum systems, noise-aware quantum compilers are used to generate physical quantum circuits to be executed on NISQ computers. The quantum hardware is calibrated very frequently and its error rates are computed accordingly. Based on the hardware error rates, a quantum compiler allocates physical qubits and schedules quantum operations. However, error rates may change post-calibration. To incorporate dynamic error rates into quantum circuit compilation with minimum cost, we propose a Machine Learning (ML)-based scheme to detect the incorrect output of the quantum circuit and predict the Probability of Successful Trials (PST) with high accuracy. Our approach can verify the error rates of the quantum hardware and validate the correctness of the extracted quantum circuit output. We provide a case study of our ML-based reliability models using IBM Q16 Melbourne quantum computer. Our results show that the proposed scheme achieves a very high prediction accuracy.
Interpreting the results of a quantum computer can pose a significant challenge due to inherent noise in these mesoscopic quantum systems. Quantum measurement, a critical component of quantum computing, involves determining the probabilities linked with quantum states post-multiple circuit computations based on quantum readout values provided by hardware. While there are promising classification-based solutions, they can either misclassify or necessitate excessive measurements, thereby proving to be costly. This article puts forth an efficient method to discern the quantum state by analyzing the probability distributions of data post-measurement. Specifically, we employ cumulative distribution functions to juxtapose the measured distribution of a sample against the distributions of basis states. The efficacy of our approach is demonstrated through experimental results on a superconducting transmon qubit architecture, which shows a substantial decrease (88%) in single qubit readout error compared to state-of-the-art measurement techniques. Moreover, we report additional error reduction (12%) compared to state-of-the-art measurement techniques when our technique is applied to enhance existing multi-qubit classification techniques. We also demonstrate the applicability of our proposed method for higher dimensional quantum systems, including classification of single qutrits as well as multiple qutrits.
In the problem of quantum channel discrimination, one distinguishes between a given number of quantum channels, which is done by sending an input state through a channel and measuring the output state. This work studies applications of variational quantum circuits and machine-learning techniques for discriminating such channels. In particular, we explore (i) the practical implementation of embedding this task into the framework of variational quantum computing, (ii) training a quantum classifier based on variational quantum circuits, and (iii) applying the quantum kernel estimation technique. For testing these three channel discrimination approaches, we considered a pair of entanglement-breaking channels and the depolarizing channel with two different depolarization factors. For the approach (i), we address solving the quantum channel discrimination problem using widely discussed parallel and sequential strategies. We show the advantage of the latter in terms of better convergence with less quantum resources. Quantum channel discrimination with a variational quantum classifier (ii) allows one to operate even with random and mixed input states and simple variational circuits. The kernel-based classification approach (iii) is also found effective as it allows one to discriminate depolarizing channels associated not with just fixed values of the depolarization factor, but with ranges of it. Additionally, we discovered that a simple modification of one of the commonly used kernels significantly increases the efficiency of this approach. Finally, our numerical findings reveal that the performance of variational methods of channel discrimination depends on the trace of the product of the output states. These findings demonstrate that quantum machine learning can be used to discriminate channels, such as those representing physical noise processes.
Abstract Measurement errors in quantum computers are very detrimental to quantum computations. The ability to efficiently and accurately readout quantum states is crucial for quantum error correction schemes and quantum algorithms. Readout fidelity is typically limited by a poor signal-to-noise (SNR) ratio between the quantum states we intend to classify, as well as energy relaxation (e.g., T1T_1T1​ decay) from an excited state to a lower state during readout. Superconducting quantum bits (qubit), one of the leading candidates for scalable quantum computing hardware, are particularly limited by energy relaxation due to their relatively short coherence times. While most approaches for classifying the results of readout on superconducting qubits typically utilize clustering algorithms (e.g., a Gaussian mixture model) on integrated readout signals, these cannot distinguish between a quantum bit that was in the ground state prior to measurement from a qubit that decays to the ground state during measurement. For this reason, we instead propose using machine learning (ML) on the raw (non-integrated) analog signal and classification models on the full time series data (i.e., the \emph{trajectory}). We observe that time series classification methods, such as our chosen long short-term memory (LSTM) model, in combination with filtering and feature engineering techniques, consistently outperform clustering models. In particular, we find that the largest improvements come from reclassifying points in the boundary regions between neighboring clusters. These boundary points correspond to measurement records that deviate from the typical cluster, likely due to transient or noisy features in the signal that are not captured when the data is integrated. By retaining temporal information, sequence-aware models such as LSTMs can better discriminate these trajectories, whereas clustering methods based on integrated values are more prone to misclassifications.
An important use-case for machine learning (ML) is that of determining readout results in quantum computers. In quantum computing (QC), classical ML models are currently being used to discriminate in-phase and quadrature (IQ) signal data to discriminate between quantum states, which is a fundamental QC operation. In our research we propose a Quantum K-Means (QK-Means) clustering technique to discriminate quantum states on the IBM Bogota quantum device, and compare its performance to the K-Means technique (its classical counterpart). We used both algorithms to perform a correlation analysis and probe cross-talk between couples of qubits on the device. We observed that QK-Means obtained test and training scores at par with the classical K-Means, and testing scores that were marginally lower than K-Means when the clusters weren’t visually separable. The training times for QK-Means were observed to be at par with an implementation of the K-Means that was not optimized. In this case, we concluded a weak correlation with a Pearson correlation coefficient of 0.2 on the (1, 2) and (2, 3) qubit couples. After analyzing the training scores, we also conclude that the 1 qubit has the worst performance at readout evidenced by the signal data not being visually separable and the low scores obtained on both clustering algorithms compared to the other qubits. Its poor performance is further verified by the calibration data showing a high readout error of 8,4%. This technique can be used to find correlations present in readout of quantum circuits and to determine cross-talk.