Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Rotations in Three-Dimensional Space

Масуд Чайчиан, Rolf Hagedorn

Published Jul 14, 2023• 0 citations
Publisher

Abstract

There are unfortunately a large variety of possibilities for writing down a rotation; also there are two different interpretations of the word ‘rotation’. Obviously, if one rotates first the coordinate frame and then, by the same rotation, the space, all points will obtain again the same coordinate as before these rotations; the same is true in the reverse order. Rotational invariance means then that the result of this rotation, seen by an observer who did not participate in the rotation, is again a possible state of the unrotated system. One says the rotations in the physical three-dimensional space induce unitary transformations in the Hilbert space, whose matrices give rise to (infinitely many independent) representations of the rotation group. The active interpretation means carrying out the sequence of rotations using a fixed system of rotation axes; the passive interpretation means carrying out the rotations using a system of rotation axes which participates in the rotation.

DOI
10.1201/9781003417187-3

Related papers

Representations of The Rotation Group

Масуд Чайчиан, Rolf Hagedorn

This chapter discusses everything in terms of wave functions and describes the choice between active and passive rotations. It defines the representations of the rotation group by means of the abstract state vectors and by means of wave functions. That implies that the rotations are active rotations. The chapter finds that for a sequence of rotations the three-dimensional matrices have the property. It considers the change of the wave function in active and passive rotations respectively. In the active interpretation the physical system — characterized in space by the wave function — is bodily rotated. In the passive interpretation the frame of reference is rotated, whereas P and the local physical state at P remain unchanged. The chapter describes that there is a description which uses the new coordinates but describes the old situation.

CRC Press eBooks•Jul 14, 2023•0 citations

Angular Momentum

Pranawa C. Deshmukh

In Chapter 1 we discussed the role of linear momentum as the generator of translational displacement in homogeneous space. Likewise, it is instructive to explore the role of angular momentum as the generator of rotational displacements in isotropic space. Not surprisingly, analogies drawn from classical physics are not adequate to describe physical particles and fields. One must therefore redefine angular momentum to describe appropriately the physical properties in nature by quantum mechanics. 4.1 Definition and Properties of Angular Momentu m Kepler orbits of planets around the sun signify our intuitive understanding of angular momentum of an object about a point (Fig. 4.1). It interprets angular momentum as moment of the momentum , expressed as the cross product of the position vector of an object with its instantaneous linear momentum. We recognize it to represent a physical quantity that is conserved in isotropic space. The classical definition of angular momentum is however not sustainable, and not just because simultaneous measurements of position and momentum are incompatible. Physical properties of particles and fields have properties that have no classical analogues. Quantum mechanics acknowledges the intrinsic incompatibility in observations of some physical properties and provides a defensible alternative theory to describe nature. We shall therefore be able to persist with the classical interpretation of angular momentum as the generator of rotation in isotropic space only up to a certain point of our analysis; beyond it, we shall require a worthier mathematical model that is robust enough to describe nature acceptably. We consider an object having an arbitrary shape and subject it to a rotation about an axis through it, such as the one schematically shown in Fig. 4.2a. On turning it through an infinitesimal angle, the shape transforms to. We denote the rotation by an operator and express this operation as With reference to a Cartesian coordinate system, a rotation relocates a point whose position vector is to (Fig. 4.2b): Equation 4.1 tells us that the function has the same value at the new orientation as the function, i.e., as, R being the operator corresponding to the said rotation. We shall refer to such a description of transformation of the function as active . In passive description, an equivalent inverse operation on the coordinate system is employed (Fig. 4.2c), leaving the function itself unchanged. The active and the passive descriptions are equivalent.

Cambridge University Press eBooks•Sep 14, 2023•0 citations

Linear Canonical Transformations and Interacting n-Particle Systems

Peter Krämer, G. John, D. Schenzle

For n particles moving in three-dimensional space, each coordinate should carry an index i = 1, 2,3 denoting the vector component and an index l = 1, 2,..., n denoting the particle number. Among the linear point transformations acting on these coordinates there are two commuting subgroups of transformations. The elements of the first one are given by product matrices M 3 × I n where the 3 × 3 matrix M 3 acts on the vector components. The elements of the second one are of the form I 3 × M n where the n × n matrix M n acts on the vectors for the different particles. To the first subgroup there belong the rotations giving rise to the rotation group SO (3, IR). The second subgroup contains permutations and transformations to various types of relative coordinates. In the present section we shall deal with this second subgroup and hence shall drop the reference to the three vector components. Moreover we shall need at present only orthogonal n × n transformation matrices.

Vieweg+Teubner eBooks•Jan 1, 1981•1 citation

Symmetry

Patrick Norman, Kenneth Ruud, Trond Saue

In everyday life, symmetry operations are given in terms of the rotations, reflections, and inversions of a physical object that leaves the object unchanged-that are, the properties of the object are invariant under the transformations. Unitary transformations correspond to familiar spatial transformations such as rotations, reflections, and translations, whereas an example of anantiunitary symmetry operation is time reversal. The number of different irreducible representations of the group will be equal to the number of symmetry elements in the group. This chapter shows that an analogous argument can be made in the case of quantum mechanics. The first encounter of spatial symmetries in studies of quantum mechanics is provided by the free particle, for which the Hamiltonian is manifestly translational invariant. The chapter presents an example of constructing explicit rotation matrices and considers a system of two coupled spin one-half particles with zero orbital angular momentum.

Wiley eBooks•Feb 9, 2018•0 citations

Symmetry groups in quantum mechanics

Alexander Semenovich Holevo

The spatially-temporal structure which we are going to introduce is a distinctive feature in the description of mechanical objects. In classical mechanics the motion of point masses is described in a frame of reference which consists of a spatial Cartesian coordinate system and a clock. The distinguished class is formed by the so called inertial frames which are characterized by the property that a free point mass performs uniform rectilinear motion with respect to such a frame. It follows that the coordinates (ξ, τ) and (ξ′, τ′) of a point mass in any two inertial frames of reference are related by the Galilei transformation 3.1.1 $$ \xi ' = R\xi + x + v\tau , \tau ' + \tau + t, $$ where R is an orthogonal matrix (rotation) which describes the orientation of the new spatial axes with respect to the old ones, x is the vector of the spatial shift of the origin, ν is the relative velocity, and τ is the time shift showing the difference between the readings of the two clocks.

Edizioni della Normale eBooks•Jan 1, 2011•3 citations

Rotations and angular moments in quantum mechanics

Jacques Van de Wiele

Comme en mécanique classique, la rotation en mécanique quantique est une transformation qui fait intervenir le moment cinétique. La différence avec la mécanique classique vient du fait que le moment cinétique est un opérateur vectoriel et non pas un vecteur ordinaire, et que ses composantes ne commutent pas deux-à-deux. Comme pour toute transformation en mécanique quantique, à chaque rotation est associé un opérateur qui agit dans l'espace des états. L'expression de cet opérateur de rotation dépend du type de rotation envisagée : rotation passive si on effectue une rotation du système de référence sans changer le système physique, rotation active si on laisse le système de référence inchangé mais on effectue une rotation sur le système physique. La première partie (Chaps. 1 et 2) de cet ouvrage traite ces deux aspects. Après avoir défini la transformation géométrique associée à la rotation la plus générale, on donne l'expression de l'opérateur de rotation dans chacun des deux cas. Les lois de transformation des champs scalaires, des champs de vecteurs et des champs de spineurs sont données ainsi que les lois de transformation des opérateurs scalaires, vectoriels et plus généralement des opérateurs de rang quelconque. La seconde partie (Chaps. 3 et 4) traite l'algèbre des moments angulaires. On définit les coefficients de couplage de 2, 3 et 4 moments angulaires ainsi que les coefficients de recouplage. La notion d'opérateur tensoriel irréductible, généralisation des opérateurs scalaire, vectoriel est introduite ainsi que le théorème de Wigner-Eckart. Les formules d'application dans des cas complexes sont données.

Annales de Physique•Jan 1, 2001•8 citations
There are unfortunately a large variety of possibilities for writing down a rotation; also there are two different interpretations of the word ‘rotation’. Obviously, if one rotates first the coordinate frame and then, by the same rotation, the space, all points will obtain again the same coordinate as before these rotations; the same is true in the reverse order. Rotational invariance means then that the result of this rotation, seen by an observer who did not participate in the rotation, is again a possible state of the unrotated system. One says the rotations in the physical three-dimensional space induce unitary transformations in the Hilbert space, whose matrices give rise to (infinitely many independent) representations of the rotation group. The active interpretation means carrying out the sequence of rotations using a fixed system of rotation axes; the passive interpretation means carrying out the rotations using a system of rotation axes which participates in the rotation.
This chapter discusses everything in terms of wave functions and describes the choice between active and passive rotations. It defines the representations of the rotation group by means of the abstract state vectors and by means of wave functions. That implies that the rotations are active rotations. The chapter finds that for a sequence of rotations the three-dimensional matrices have the property. It considers the change of the wave function in active and passive rotations respectively. In the active interpretation the physical system — characterized in space by the wave function — is bodily rotated. In the passive interpretation the frame of reference is rotated, whereas P and the local physical state at P remain unchanged. The chapter describes that there is a description which uses the new coordinates but describes the old situation.
In Chapter 1 we discussed the role of linear momentum as the generator of translational displacement in homogeneous space. Likewise, it is instructive to explore the role of angular momentum as the generator of rotational displacements in isotropic space. Not surprisingly, analogies drawn from classical physics are not adequate to describe physical particles and fields. One must therefore redefine angular momentum to describe appropriately the physical properties in nature by quantum mechanics. 4.1 Definition and Properties of Angular Momentu m Kepler orbits of planets around the sun signify our intuitive understanding of angular momentum of an object about a point (Fig. 4.1). It interprets angular momentum as moment of the momentum , expressed as the cross product of the position vector of an object with its instantaneous linear momentum. We recognize it to represent a physical quantity that is conserved in isotropic space. The classical definition of angular momentum is however not sustainable, and not just because simultaneous measurements of position and momentum are incompatible. Physical properties of particles and fields have properties that have no classical analogues. Quantum mechanics acknowledges the intrinsic incompatibility in observations of some physical properties and provides a defensible alternative theory to describe nature. We shall therefore be able to persist with the classical interpretation of angular momentum as the generator of rotation in isotropic space only up to a certain point of our analysis; beyond it, we shall require a worthier mathematical model that is robust enough to describe nature acceptably. We consider an object having an arbitrary shape and subject it to a rotation about an axis through it, such as the one schematically shown in Fig. 4.2a. On turning it through an infinitesimal angle, the shape transforms to. We denote the rotation by an operator and express this operation as With reference to a Cartesian coordinate system, a rotation relocates a point whose position vector is to (Fig. 4.2b): Equation 4.1 tells us that the function has the same value at the new orientation as the function, i.e., as, R being the operator corresponding to the said rotation. We shall refer to such a description of transformation of the function as active . In passive description, an equivalent inverse operation on the coordinate system is employed (Fig. 4.2c), leaving the function itself unchanged. The active and the passive descriptions are equivalent.
For n particles moving in three-dimensional space, each coordinate should carry an index i = 1, 2,3 denoting the vector component and an index l = 1, 2,..., n denoting the particle number. Among the linear point transformations acting on these coordinates there are two commuting subgroups of transformations. The elements of the first one are given by product matrices M 3 × I n where the 3 × 3 matrix M 3 acts on the vector components. The elements of the second one are of the form I 3 × M n where the n × n matrix M n acts on the vectors for the different particles. To the first subgroup there belong the rotations giving rise to the rotation group SO (3, IR). The second subgroup contains permutations and transformations to various types of relative coordinates. In the present section we shall deal with this second subgroup and hence shall drop the reference to the three vector components. Moreover we shall need at present only orthogonal n × n transformation matrices.
In everyday life, symmetry operations are given in terms of the rotations, reflections, and inversions of a physical object that leaves the object unchanged-that are, the properties of the object are invariant under the transformations. Unitary transformations correspond to familiar spatial transformations such as rotations, reflections, and translations, whereas an example of anantiunitary symmetry operation is time reversal. The number of different irreducible representations of the group will be equal to the number of symmetry elements in the group. This chapter shows that an analogous argument can be made in the case of quantum mechanics. The first encounter of spatial symmetries in studies of quantum mechanics is provided by the free particle, for which the Hamiltonian is manifestly translational invariant. The chapter presents an example of constructing explicit rotation matrices and considers a system of two coupled spin one-half particles with zero orbital angular momentum.
The spatially-temporal structure which we are going to introduce is a distinctive feature in the description of mechanical objects. In classical mechanics the motion of point masses is described in a frame of reference which consists of a spatial Cartesian coordinate system and a clock. The distinguished class is formed by the so called inertial frames which are characterized by the property that a free point mass performs uniform rectilinear motion with respect to such a frame. It follows that the coordinates (ξ, τ) and (ξ′, τ′) of a point mass in any two inertial frames of reference are related by the Galilei transformation 3.1.1 ξ′=Rξ+x+vτ,τ′+τ+t, \xi ' = R\xi + x + v\tau , \tau ' + \tau + t, ξ′=Rξ+x+vτ,τ′+τ+t, where R is an orthogonal matrix (rotation) which describes the orientation of the new spatial axes with respect to the old ones, x is the vector of the spatial shift of the origin, ν is the relative velocity, and τ is the time shift showing the difference between the readings of the two clocks.
Comme en mécanique classique, la rotation en mécanique quantique est une transformation qui fait intervenir le moment cinétique. La différence avec la mécanique classique vient du fait que le moment cinétique est un opérateur vectoriel et non pas un vecteur ordinaire, et que ses composantes ne commutent pas deux-à-deux. Comme pour toute transformation en mécanique quantique, à chaque rotation est associé un opérateur qui agit dans l'espace des états. L'expression de cet opérateur de rotation dépend du type de rotation envisagée : rotation passive si on effectue une rotation du système de référence sans changer le système physique, rotation active si on laisse le système de référence inchangé mais on effectue une rotation sur le système physique. La première partie (Chaps. 1 et 2) de cet ouvrage traite ces deux aspects. Après avoir défini la transformation géométrique associée à la rotation la plus générale, on donne l'expression de l'opérateur de rotation dans chacun des deux cas. Les lois de transformation des champs scalaires, des champs de vecteurs et des champs de spineurs sont données ainsi que les lois de transformation des opérateurs scalaires, vectoriels et plus généralement des opérateurs de rang quelconque. La seconde partie (Chaps. 3 et 4) traite l'algèbre des moments angulaires. On définit les coefficients de couplage de 2, 3 et 4 moments angulaires ainsi que les coefficients de recouplage. La notion d'opérateur tensoriel irréductible, généralisation des opérateurs scalaire, vectoriel est introduite ainsi que le théorème de Wigner-Eckart. Les formules d'application dans des cas complexes sont données.