Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

NTT technical review

Electron Spin Resonance Spectroscopy Using a Superconducting Flux Qubit

Hiraku Toida, Kosuke Kakuyanagi, William J. Munro, Hiroshi Yamaguchi, Shiro Saito

Published Aug 1, 2019• 1 citation
Publisher

Abstract

We use a superconducting flux qubit for the sensing application of electron spin resonance (ESR) spectroscopy.The superconducting flux qubit is a highly sensitive magnetometer with micrometer-scale spatial resolution.The sensitivity of our spectrometer is 400 spins/√Hz, and the sensing volume is 0.05 pL.This high sensitivity and high spatial resolution enable us to investigate a small number of electron spins in a microscale area.The spectrometer also obtains a wider ESR spectrum range with twoparameter (frequency and magnetic field) scanning.This enables us to refine the material parameters.

DOI
10.53829/ntr201908ra1

Related papers

Electron Spin Resonance Detected by Superconducting Circuits

Rangga P. Budoyo, Hiraku Toida, Shiro Saito

Superconducting circuits are promising components for future quantum information technologies such as quantum computing, quantum simulation, and quantum sensing. Superconducting quantum interference devices (SQUIDs) and superconducting flux qubits can be used as a sensitive magnetic field sensor to detect local electron spin resonance (ESR). These types of sensor are characterized by good sensitivity and high spatial resolution for electron spins. In fact, we have achieved a sensitivity of 20 spins/\(\sqrt{\text {Hz}}\) with a sensing volume of 6 fl combining a flux qubit and qubit readout using a Josephson bifurcation amplifier. As a demonstration, we measured the ESR spectrum of erbium electron spins in a Y\(_{2}\)SiO\(_{5}\) crystal and nitrogen vacancy centers in diamond. In both cases, we obtained reasonable electron spin parameters by fitting a simulation to the spectrum. In this way, we proved superconducting circuits to be promising magnetic field sensors for evaluating the properties of solid materials.

Quantum science and technology•Jan 1, 2021•1 citation

Electron spin resonance with up to 20 spin sensitivity measured using a superconducting flux qubit

Rangga P. Budoyo, Kosuke Kakuyanagi, Hiraku Toida +2 more

We report on electron spin resonance spectroscopy measurements using a superconducting flux qubit with a sensing volume of 6 fl. The qubit is read out using a frequency-tunable Josephson bifurcation amplifier, which leads to an inferred measurement sensitivity of about 20 spins in a 1 s measurement. This sensitivity represents an order of magnitude improvement when compared to flux-qubit schemes using a direct current-superconducting quantum interference device switching readout. Furthermore, noise spectroscopy reveals that the sensitivity is limited by flicker (1/f) flux noise.

arXiv:2003.09131•Applied Physics Letters•May 11, 2020•26 citations

Electron paramagnetic resonance spectroscopy using a single artificial atom

Hiraku Toida, Yuichiro Matsuzaki, Kosuke Kakuyanagi +4 more

Abstract Electron paramagnetic resonance (EPR) spectroscopy is an important technology in physics, chemistry, materials science, and biology. Sensitive detection with a small sample volume is a key objective in these areas, because it is crucial, for example, for the readout of a highly packed spin based quantum memory or the detection of transition metals in biomaterials. Here, we demonstrate a novel EPR spectrometer using a single artificial atom as a sensitive detector of spin magnetization. The artificial atom, a superconducting flux qubit, provides advantages in terms of its strong coupling with magnetic fields. We estimate a sensitivity of ~400 spins·Hz−1/2 with a magnetic sensing volume around 10−14λ3 (50 femtoliters), where λ is the wavelength of the irradiated microwave. Our artificial atom works as a highly sensitive EPR spectrometer with micron-scale area with future opportunity for measuring single spins on the nanometer scale.

arXiv:1711.10148•Communications Physics•Mar 29, 2019•34 citations

Magnetometry of neurons using a superconducting qubit

Hiraku Toida, Koji Sakai, Tetsuhiko Teshima +5 more

Abstract Iron plays important physiological and pathological roles in the human body. However, microscopic analysis including redox status by a conventional electron spin resonance (ESR) spectrometer is difficult due to limited spatial resolution and sensitivity. Here we demonstrate magnetometry of cultured neurons on a polymeric film using a superconducting flux qubit that works as a sensitive magnetometer in a microscale area towards realizing ESR spectroscopy. By changing temperature (12.5–200 mK) and a magnetic field (2.5–12.5 mT), we observe a clear magnetization signal from the neurons that is well above the control magnetometry of the polymeric film itself. From ESR spectrum measured at 10 K, the magnetization signal is identified to originate from electron spins of iron ions in neurons. This technique to detect a bio-spin system can be extended to achieve ESR spectroscopy at the single-cell level, which will give the spectroscopic fingerprint of cells.

arXiv:2206.15164•Communications Physics•Feb 6, 2023•9 citations

Submicrometer-scale temperature sensing using quantum coherence of a superconducting qubit

Kosuke Kakuyanagi, Hiraku Toida, Leonid Victorovich Abdurakhimov +1 more

Abstract Interest is growing in the development of quantum sensing based on the principles of quantum mechanics, such as discrete energy levels, quantum superposition, and quantum entanglement. Superconducting flux qubits are quantum two-level systems whose energy is sensitive to a magnetic field. Therefore, they can be used as high-sensitivity magnetic field sensors that detect the magnetization of a spin ensemble. Since the magnetization depends on temperature and the magnetic field, the temperature can be determined by measuring the magnetization using the flux qubit. In this study, we demonstrated highly sensitive temperature sensing with high spatial resolution as an application of a magnetic field sensor using the quantum coherence of a superconducting flux qubit. By using a superconducting flux qubit to detect the temperature dependence of the polarization ratio of electron spins in nano-diamond particles, we succeeded in measuring the temperature with a sensitivity of 1.3 µKµ Hz − 1 at T = 9.1 mK in the submicrometer range.

New Journal of Physics•Jan 1, 2023•6 citations

Polarizing electron spins with a superconducting flux qubit

Shingo Kukita, Hideaki Ookane, Yuichiro Matsuzaki +1 more

Electron-spin resonance is a useful tool to investigate properties of materials in magnetic fields where high spin polarization of target electron spins is required in order to obtain high sensitivity. However, the smaller the magnetic fields becomes, the more difficult it is to obtain high polarization by thermalization. Here, we propose to employ a superconducting flux qubit (FQ) to polarize electron spins actively. We have to overcome a large energy difference between the FQ and electron spins for efficient energy transfer among them. For this purpose, we adopt a spin-lock technique on the FQ where the Rabi frequency associated with the spin-locking can match the resonance (Larmor) one of the electron spins. We find that adding dephasing on the spins is beneficial to obtain high polarization of them, because otherwise the electron spins are trapped in dark states that cannot be coupled with the FQ. We show that our scheme can achieve high polarization of electron spins in realistic experimental conditions.

arXiv:2108.02463•Physical Review A•Jan 28, 2022•1 citation
We use a superconducting flux qubit for the sensing application of electron spin resonance (ESR) spectroscopy.The superconducting flux qubit is a highly sensitive magnetometer with micrometer-scale spatial resolution.The sensitivity of our spectrometer is 400 spins/√Hz, and the sensing volume is 0.05 pL.This high sensitivity and high spatial resolution enable us to investigate a small number of electron spins in a microscale area.The spectrometer also obtains a wider ESR spectrum range with twoparameter (frequency and magnetic field) scanning.This enables us to refine the material parameters.
Superconducting circuits are promising components for future quantum information technologies such as quantum computing, quantum simulation, and quantum sensing. Superconducting quantum interference devices (SQUIDs) and superconducting flux qubits can be used as a sensitive magnetic field sensor to detect local electron spin resonance (ESR). These types of sensor are characterized by good sensitivity and high spatial resolution for electron spins. In fact, we have achieved a sensitivity of 20 spins/Hz\sqrt{\text {Hz}}Hz​ with a sensing volume of 6 fl combining a flux qubit and qubit readout using a Josephson bifurcation amplifier. As a demonstration, we measured the ESR spectrum of erbium electron spins in a Y2_{2}2​SiO5_{5}5​ crystal and nitrogen vacancy centers in diamond. In both cases, we obtained reasonable electron spin parameters by fitting a simulation to the spectrum. In this way, we proved superconducting circuits to be promising magnetic field sensors for evaluating the properties of solid materials.
We report on electron spin resonance spectroscopy measurements using a superconducting flux qubit with a sensing volume of 6 fl. The qubit is read out using a frequency-tunable Josephson bifurcation amplifier, which leads to an inferred measurement sensitivity of about 20 spins in a 1 s measurement. This sensitivity represents an order of magnitude improvement when compared to flux-qubit schemes using a direct current-superconducting quantum interference device switching readout. Furthermore, noise spectroscopy reveals that the sensitivity is limited by flicker (1/f) flux noise.
Abstract Electron paramagnetic resonance (EPR) spectroscopy is an important technology in physics, chemistry, materials science, and biology. Sensitive detection with a small sample volume is a key objective in these areas, because it is crucial, for example, for the readout of a highly packed spin based quantum memory or the detection of transition metals in biomaterials. Here, we demonstrate a novel EPR spectrometer using a single artificial atom as a sensitive detector of spin magnetization. The artificial atom, a superconducting flux qubit, provides advantages in terms of its strong coupling with magnetic fields. We estimate a sensitivity of ~400 spins·Hz−1/2 with a magnetic sensing volume around 10−14λ3 (50 femtoliters), where λ is the wavelength of the irradiated microwave. Our artificial atom works as a highly sensitive EPR spectrometer with micron-scale area with future opportunity for measuring single spins on the nanometer scale.
Abstract Iron plays important physiological and pathological roles in the human body. However, microscopic analysis including redox status by a conventional electron spin resonance (ESR) spectrometer is difficult due to limited spatial resolution and sensitivity. Here we demonstrate magnetometry of cultured neurons on a polymeric film using a superconducting flux qubit that works as a sensitive magnetometer in a microscale area towards realizing ESR spectroscopy. By changing temperature (12.5–200 mK) and a magnetic field (2.5–12.5 mT), we observe a clear magnetization signal from the neurons that is well above the control magnetometry of the polymeric film itself. From ESR spectrum measured at 10 K, the magnetization signal is identified to originate from electron spins of iron ions in neurons. This technique to detect a bio-spin system can be extended to achieve ESR spectroscopy at the single-cell level, which will give the spectroscopic fingerprint of cells.
Abstract Interest is growing in the development of quantum sensing based on the principles of quantum mechanics, such as discrete energy levels, quantum superposition, and quantum entanglement. Superconducting flux qubits are quantum two-level systems whose energy is sensitive to a magnetic field. Therefore, they can be used as high-sensitivity magnetic field sensors that detect the magnetization of a spin ensemble. Since the magnetization depends on temperature and the magnetic field, the temperature can be determined by measuring the magnetization using the flux qubit. In this study, we demonstrated highly sensitive temperature sensing with high spatial resolution as an application of a magnetic field sensor using the quantum coherence of a superconducting flux qubit. By using a superconducting flux qubit to detect the temperature dependence of the polarization ratio of electron spins in nano-diamond particles, we succeeded in measuring the temperature with a sensitivity of 1.3 µKµ Hz − 1 at T = 9.1 mK in the submicrometer range.
Electron-spin resonance is a useful tool to investigate properties of materials in magnetic fields where high spin polarization of target electron spins is required in order to obtain high sensitivity. However, the smaller the magnetic fields becomes, the more difficult it is to obtain high polarization by thermalization. Here, we propose to employ a superconducting flux qubit (FQ) to polarize electron spins actively. We have to overcome a large energy difference between the FQ and electron spins for efficient energy transfer among them. For this purpose, we adopt a spin-lock technique on the FQ where the Rabi frequency associated with the spin-locking can match the resonance (Larmor) one of the electron spins. We find that adding dephasing on the spins is beneficial to obtain high polarization of them, because otherwise the electron spins are trapped in dark states that cannot be coupled with the FQ. We show that our scheme can achieve high polarization of electron spins in realistic experimental conditions.