Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Three-dimensional location system based on an L-shaped array of Rydberg atomic receivers

Yang Yan, Jinpeng Yuan, Linjie Zhang, Liantuan Xiao, Suotang Jia, Lirong Wang

Published Jul 5, 2023• 25 citations
Publisher

Abstract

The Rydberg atomic receiver, sensing microwave electric field with high sensitivity and broad bandwidth, possesses the potential to be the staple for precise navigation and remote sensing. In this Letter, a Ku-band three-dimensional location system using an L-shaped array of Rydberg atomic receivers is theoretically proposed and experimentally demonstrated, and the proof of principle results show excellent consistency between the location-derived and the setting coordinates. The novel L-shaped array, together with the triangulation method, gives both phase difference and angle of arrival, achieving location of the horn for a signal microwave field in three-dimensional space. The concluded validity of this location system in the testing scene remains at approximately 90% with a theoretical maximum location tolerance of 5.7 mm. Furthermore, the estimation of two different spatiotemporal coordinates for the moving target confirms the velocity measurement capability of the system with errors less than 0.5 mm/s. The proposed location system using a Rydberg atomic receiver array is a verification for the most basic element and can be extended through repetition or nesting to a multi-input–multi-output system as well as multi-channel information processing.

DOI
10.1364/ol.496057

Related papers

Digital Beamforming and Receiving Array Research Based on Rydberg Field Probes

Ruiqi Mao, Yi Lin, Yunqi Fu +2 more

The electric field sensing technology based on the Rydberg atom has attracted widespread attention due to its powerful detection ability for the amplitude, phase, and polarization of the electric field. In this work, based on the electromagnetically induced transparency (EIT) of the Rydberg atom and combined with a heterodyne Rydberg atom-based mixer, we measured the binary array composed of the Rydberg Field Probes (RFPs). The measured phase difference of the electric field at two different RFPs is related to the direction of incidence. We digitally transform the received signal at 2.63 GHz and conduct digital beamforming (DBF) processing to obtain its array pattern and beam direction. The measurement accuracy and reliability are greatly improved compared with the phase comparison method, and the angle-of-arrival (AOA) variance is less than 1.5°. The effectiveness of DBF based on the Rydberg atomic sensor is verified, which lays the foundation for the subsequent linear and planar array reception of the Rydberg atomic sensor. In addition, the occlusion based on RFPs is also measured, and its weak occlusion characteristics are confirmed. This unique feature provides feasible support for the 3-D receiving array based on the Rydberg atomic sensor.

IEEE Transactions on Antennas and Propagation•Nov 1, 2023•41 citations

Key Metrics Analysis of Rydberg Microwave Receivers

Jiarui Chen, Xiaoguo Huang, Menglei Zhu +3 more

Rydberg atoms are atoms in their highly excited energy states. The physical properties of Rydberg atoms in the presence of external fields play an important role in quantum precision measurement. In recent years, radio-frequency electric field sensing based on Rydberg atoms has attracted significant interest. It is widely recognized as an electromagnetic sensing system fundamentally different from traditional ones. As a quantum sensor, it is expected to surpass several foundational limitations of traditional receivers, such as sensitivity, dynamic range and frequency bandwidth. It was reported that Rydberg sensing systems can sense microwaves of frequencies from DC up to 1THz. Its quantum nature would possibly avoid internal thermal (Johnson) noise, even at room temperature. Recent demonstrations have also observed high precision for terahertz imaging, strong fields sensing, proof-of-principle communication. However, limitations of this novel system have not been addressed, especially for a practical radar, communication or electronic warfare system. Here in this work, we first compare the architectures of different microwave receivers and then analyze the metrics of Rydberg microwave receivers, such as instantaneous bandwidth and dynamic range based on experimental results. We concluded by pointing out several main obstacles to overcome for realizing a practical state-of-the-art microwave receiver.

Photonics & Electromagnetics Research Symposium (PIERS)•Nov 21, 2021•3 citations

Rydberg-Atom-Based Angle-of-Arrival Estimation Method for Ku-Band Microwave Signals

Xingchen Hu, Hao Wu, Yong Gao +3 more

The determination of the angle of arrival (AoA) of Ku-band microwave signals is of great significance in satellite communications, spectrum monitoring, and national defense security, which has created an urgent demand for high-precision and interference-resistant passive detection techniques. In this study, we propose a Rydberg-atom-based passive measurement method for estimating the AoA of Ku-band incident signals. Based on well-established quantum optical techniques, the proposed method converts the EIT-AT splitting intervals induced by waves or signals incident from different directions in Rydberg atoms within a single vapor cell into the electric-field intensity at the atomic sensor. An electric-field-intensity-angle response model is then established for AoA estimation of a 13.6 GHz wave or signal. Simulation results demonstrate that the proposed method can determine the incident direction within a certain angular range, with an estimation error of less than 3.8°. Without the need for self-calibration and free from interference caused by actively emitted probing electromagnetic waves or reference electric fields, the proposed approach enables AoA determination of incident waves or signals using a single vapor cell with a length of 5 cm.

Sensors•Aug 11, 2026•1 citation

Sensitivity Enhancement of S-Band Rydberg Atom Microwave Receiver Using Resonant Cavity

Yipeng Xie, Xinbing Chen, Mingwei Lei +1 more

Rydberg atom-based microwave electric field sensing has attracted growing interest owing to its inherent advantages, such as absolute calibration, wideband operability, and compatibility with room-temperature devices. A critical bottleneck that limits sensitivity is the inefficient coupling between the Rydberg atoms and the incident microwave field, particularly when detecting weak signals propagating in free space. Here we propose and experimentally validate a scheme that integrates a horn antenna with a resonant microwave cavity to significantly improve this coupling for free-space signal reception in the S-band. Using a two-photon excitation scheme in a cesium vapor cell, we systematically characterize the sensing performance under three configurations: a bare cell, direct cavity injection, and a cavity coupled to a horn antenna that captures free-space microwave signals over a 1 m distance. In the antenna-coupled cavity configuration, we achieve an optimal sensitivity of 2.33 nV/cm/$\sqrt{\text{Hz}}$ at the receiving antenna, which corresponds to an enhancement of approximately 17.9 dB compared to the optimized bare vapor cell configuration. Our findings offer a practical and effective route to boost the sensitivity of Rydberg atomic sensors, facilitating their adoption in real-world microwave metrology and wireless communication applications where weak free-space electric fields must be reliably measured.

physics.atom-phCross-listedarXiv:2606.02669•Optics Express•Jun 2, 2026•1 citation

Rydberg Atomic Receiver for Wireless Physical Layer: A Survey

Minze Chen, Mingyao Cui, Zhiao Zhu +6 more

With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.

physics.atom-phCross-listedarXiv:2610.25462•Oct 20, 2026•0 citations

High-accuracy measurement of Ku-band microwave antenna gain with Rydberg atom quantum sensing

Liang Wu, Shaohua Li, Jinfang Zhang +1 more

Antenna gain reflects the ability to concentrate input power and radiate electromagnetic waves in a specific direction, and is a key indicator for evaluating antenna performance. In this paper, a high-accuracy Rydberg-atom-assisted gain-transfer measurement method is proposed for Ku -band microwave antenna gain calibration. The microwave electric field (E-field) intensity is precisely measured via electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting effects. Under the same experimental conditions, the microwave intensity distributions of a standard gain antenna (SGA) and the antenna under test (AUT) are systematically compared, enabling gain calibration of the AUT at 12.007 GHz through the proposed method. Furthermore, a Rydberg atom microwave sensor with multi-level transitions ( \(nD_{5/2}\) - \((n+1)P_{3/2}\) , n =50 \(\sim\) 55), is employed to extend the calibration over a wide frequency range within 12.694 \(\sim\) 17.041 GHz, achieving a measurement uncertainty below 0.38 dB. This work establishes a systematic framework for microwave device calibration, providing both theoretical support and experimental validation for precision metrology of high-performance microwave components.

Scientific Reports•Aug 12, 2026•0 citations
The Rydberg atomic receiver, sensing microwave electric field with high sensitivity and broad bandwidth, possesses the potential to be the staple for precise navigation and remote sensing. In this Letter, a Ku-band three-dimensional location system using an L-shaped array of Rydberg atomic receivers is theoretically proposed and experimentally demonstrated, and the proof of principle results show excellent consistency between the location-derived and the setting coordinates. The novel L-shaped array, together with the triangulation method, gives both phase difference and angle of arrival, achieving location of the horn for a signal microwave field in three-dimensional space. The concluded validity of this location system in the testing scene remains at approximately 90% with a theoretical maximum location tolerance of 5.7 mm. Furthermore, the estimation of two different spatiotemporal coordinates for the moving target confirms the velocity measurement capability of the system with errors less than 0.5 mm/s. The proposed location system using a Rydberg atomic receiver array is a verification for the most basic element and can be extended through repetition or nesting to a multi-input–multi-output system as well as multi-channel information processing.
The electric field sensing technology based on the Rydberg atom has attracted widespread attention due to its powerful detection ability for the amplitude, phase, and polarization of the electric field. In this work, based on the electromagnetically induced transparency (EIT) of the Rydberg atom and combined with a heterodyne Rydberg atom-based mixer, we measured the binary array composed of the Rydberg Field Probes (RFPs). The measured phase difference of the electric field at two different RFPs is related to the direction of incidence. We digitally transform the received signal at 2.63 GHz and conduct digital beamforming (DBF) processing to obtain its array pattern and beam direction. The measurement accuracy and reliability are greatly improved compared with the phase comparison method, and the angle-of-arrival (AOA) variance is less than 1.5°. The effectiveness of DBF based on the Rydberg atomic sensor is verified, which lays the foundation for the subsequent linear and planar array reception of the Rydberg atomic sensor. In addition, the occlusion based on RFPs is also measured, and its weak occlusion characteristics are confirmed. This unique feature provides feasible support for the 3-D receiving array based on the Rydberg atomic sensor.
Rydberg atoms are atoms in their highly excited energy states. The physical properties of Rydberg atoms in the presence of external fields play an important role in quantum precision measurement. In recent years, radio-frequency electric field sensing based on Rydberg atoms has attracted significant interest. It is widely recognized as an electromagnetic sensing system fundamentally different from traditional ones. As a quantum sensor, it is expected to surpass several foundational limitations of traditional receivers, such as sensitivity, dynamic range and frequency bandwidth. It was reported that Rydberg sensing systems can sense microwaves of frequencies from DC up to 1THz. Its quantum nature would possibly avoid internal thermal (Johnson) noise, even at room temperature. Recent demonstrations have also observed high precision for terahertz imaging, strong fields sensing, proof-of-principle communication. However, limitations of this novel system have not been addressed, especially for a practical radar, communication or electronic warfare system. Here in this work, we first compare the architectures of different microwave receivers and then analyze the metrics of Rydberg microwave receivers, such as instantaneous bandwidth and dynamic range based on experimental results. We concluded by pointing out several main obstacles to overcome for realizing a practical state-of-the-art microwave receiver.
The determination of the angle of arrival (AoA) of Ku-band microwave signals is of great significance in satellite communications, spectrum monitoring, and national defense security, which has created an urgent demand for high-precision and interference-resistant passive detection techniques. In this study, we propose a Rydberg-atom-based passive measurement method for estimating the AoA of Ku-band incident signals. Based on well-established quantum optical techniques, the proposed method converts the EIT-AT splitting intervals induced by waves or signals incident from different directions in Rydberg atoms within a single vapor cell into the electric-field intensity at the atomic sensor. An electric-field-intensity-angle response model is then established for AoA estimation of a 13.6 GHz wave or signal. Simulation results demonstrate that the proposed method can determine the incident direction within a certain angular range, with an estimation error of less than 3.8°. Without the need for self-calibration and free from interference caused by actively emitted probing electromagnetic waves or reference electric fields, the proposed approach enables AoA determination of incident waves or signals using a single vapor cell with a length of 5 cm.
Rydberg atom-based microwave electric field sensing has attracted growing interest owing to its inherent advantages, such as absolute calibration, wideband operability, and compatibility with room-temperature devices. A critical bottleneck that limits sensitivity is the inefficient coupling between the Rydberg atoms and the incident microwave field, particularly when detecting weak signals propagating in free space. Here we propose and experimentally validate a scheme that integrates a horn antenna with a resonant microwave cavity to significantly improve this coupling for free-space signal reception in the S-band. Using a two-photon excitation scheme in a cesium vapor cell, we systematically characterize the sensing performance under three configurations: a bare cell, direct cavity injection, and a cavity coupled to a horn antenna that captures free-space microwave signals over a 1 m distance. In the antenna-coupled cavity configuration, we achieve an optimal sensitivity of 2.33 nV/cm/Hz\sqrt{\text{Hz}}Hz​ at the receiving antenna, which corresponds to an enhancement of approximately 17.9 dB compared to the optimized bare vapor cell configuration. Our findings offer a practical and effective route to boost the sensitivity of Rydberg atomic sensors, facilitating their adoption in real-world microwave metrology and wireless communication applications where weak free-space electric fields must be reliably measured.
With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
Antenna gain reflects the ability to concentrate input power and radiate electromagnetic waves in a specific direction, and is a key indicator for evaluating antenna performance. In this paper, a high-accuracy Rydberg-atom-assisted gain-transfer measurement method is proposed for Ku -band microwave antenna gain calibration. The microwave electric field (E-field) intensity is precisely measured via electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting effects. Under the same experimental conditions, the microwave intensity distributions of a standard gain antenna (SGA) and the antenna under test (AUT) are systematically compared, enabling gain calibration of the AUT at 12.007 GHz through the proposed method. Furthermore, a Rydberg atom microwave sensor with multi-level transitions ( nD5/2nD_{5/2}nD5/2​ - (n+1)P3/2(n+1)P_{3/2}(n+1)P3/2​ , n =50 ∼\sim∼ 55), is employed to extend the calibration over a wide frequency range within 12.694 ∼\sim∼ 17.041 GHz, achieving a measurement uncertainty below 0.38 dB. This work establishes a systematic framework for microwave device calibration, providing both theoretical support and experimental validation for precision metrology of high-performance microwave components.