Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Science and Technology

Microgravity facilities for cold atom experiments

Matthias Raudonis, Albert Roura, Matthias Meister, Christoph Lotz, Ludger Overmeyer, Sven Herrmann, Andreas Gierse, Cláus Lämmerzahl, N. P. Bigelow, Maike Diana Lachmann, Baptist Piest, Naceur Gaaloul, Ernst Maria Rasel, Christian Schubert, Waldemar Herr, Christian Deppner, Holger Ahlers, Wolfgang A. Ertmer, Jason Williams, Nathan E. Lundblad, Lisa Wörner

Published Jun 26, 2023• 17 citations
Publisher

Abstract

Abstract Microgravity platforms enable cold atom research beyond experiments in typical laboratories by removing restrictions due to the gravitational acceleration or compensation techniques. While research in space allows for undisturbed experimentation, technological readiness, availability and accessibility present challenges for experimental operation. In this work we focus on the main capabilities and unique features of ground-based microgravity facilities for cold atom research. A selection of current and future scientific opportunities and their high demands on the microgravity environment are presented, and some relevant ground-based facilities are discussed and compared. Specifically, we point out the applicable free fall times, repetition rates, stability and payload capabilities, as well as programmatic and operational aspects of these facilities. These are contrasted with the requirements of various cold atom experiments. Besides being an accelerator for technology development, ground-based microgravity facilities allow fundamental and applied research with the additional benefit of enabling hands-on access to the experiment for modifications and adjustments.

DOI
10.1088/2058-9565/ace1a3

Related papers

The Bose-Einstein Condensate and Cold Atom Laboratory

Kai Frye, Sven Abend, Wolfgang Bartosch +51 more

Abstract Microgravity eases several constraints limiting experiments with ultracold and condensed atoms on ground. It enables extended times of flight without suspension and eliminates the gravitational sag for trapped atoms. These advantages motivated numerous initiatives to adapt and operate experimental setups on microgravity platforms. We describe the design of the payload, motivations for design choices, and capabilities of the Bose-Einstein Condensate and Cold Atom Laboratory (BECCAL), a NASA-DLR collaboration. BECCAL builds on the heritage of previous devices operated in microgravity, features rubidium and potassium, multiple options for magnetic and optical trapping, different methods for coherent manipulation, and will offer new perspectives for experiments on quantum optics, atom optics, and atom interferometry in the unique microgravity environment on board the International Space Station.

arXiv:1912.04849•EPJ Quantum Technology•Jan 4, 2021•190 citations

Matter-wave optics with Bose-Einstein condensates in microgravity

Jan Rudolph

Quantum sensors based on the interference of cold atoms have advanced to the forefront of precision measurements in geodesy, metrology and tests of fundamental physics. The ultimate potential of these devices is realized using quantum degenerate atoms in extended free fall. This can be achieved on microgravity platforms such as drop towers, parabolic flights, ballistic rockets, satellites and space stations. The transition to mobile and robust devices that can withstand the demands of these environments comes with many challenges. Quantum sensors need to be scaled down and integrated without compromising their performance. In fact, they need to significantly outpace conventional instruments, since microgravity time is an expensive resource and limited to a few seconds at a time on the most accessible platforms. This thesis describes the construction, qualification and operation of a miniaturized ultracold atom experiment that meets these challenges. The QUANTUS-2 apparatus features a payload weight of 147 kg and a payload volume of 0.3 m^3. It generates Bose-Einstein condensates of 4×10^5 ^87Rb atoms every 1.6 seconds, a flux of ultra-cold atoms that is on par with the best lab-sized devices. Ensembles of 1×10^5 atoms can be created at a 1 Hz rate. It is currently the fastest machine of its kind and achieves the highest atom number of any atom chip setup. The apparatus continuously withstands peak accelerations of up to 45 g during microgravity campaigns at the drop tower facility in Bremen, Germany. Here, the payload has accrued 208 drops and 9 catapult launches over 24 month. The setup is the first atom optics experiment to stand up to the technical demands of catapult operation. Four condensates can be created and observed consecutively during nine seconds of free fall in a single catapult launch. In total, the experiment has been suspended in microgravity for over 17 minutes. With the record source performance, the repetition rate for microgravity experiments with ultra-cold atoms was increased by a factor of four compared to previous devices. The total atom number was increased by a factor of 40, vastly improving the signal to noise ratio for absorption images of spatially extended clouds. The ensembles can be prepared consistently over many weeks of drop tower operation. The variance of the mean center of mass velocity in two observable directions is 7.3 μm/s and 6.9 μm/s. Magnetic lensing techniques were employed to manipulate the expansion of the ensembles. First results yield a residual expansion rate in three dimensions of σ_v = 116.9 ± 13.9 μm/s, which implies a three-dimensional effective temperature of T = 47.6 ± 11.3 pK at an average condensate atom number of N = 93000. These values constitute the best collimation of any atomic ensemble and the most promising source for atom interferometry reported to date. Optimizing the current lensing sequence will reduce the expansion rate further to effective temperatures in the femtokelvin regime. The level of control demonstrated over the condensates is highly relevant for the advancement of matter-wave optics and quantum sensors. Controlling the motion and size of atomic clouds is intrinsically tied to many systematic effects in high precision measurements. QUANTUS-2 will provide a platform to explore and mitigate these limitations on unprecedented time scales of up to seven seconds of free evolution.

•Jan 1, 2016•17 citations

Exploring quantum gases for space-borne interferometry

Ernst Maria Rasel

Ultra-cold quantum gases in space promise to boost the sensitivity of matter-wave interferometers. Applications of the latter extend from fundamental physics over the use in navigation to interdisciplinary applications such as geodesy, e.g. satellite gravimetry [1, 2]. Exploiting quantum gases for high-precision interferometry places high demands on their control and manipulation. We take benefit of various microgravity platforms such as the Bremen drop tower [3], the Einstein elevator in Hannover [4], sounding rockets [5,6] and the international space station [7] to advance the necessary methods. The DLR-mission MAIUS-1 demonstrated Bose-Einstein condensation and performed first interferometry experiments [4]. NASA’s Cold Atom Laboratory continues this research in orbit on the ISS [7]. In addition, atom interferometry is pursued in highly dynamic environments such as parabolic flights [8]. Starting from a rubidium Bose-Einstein condensate, recently lowest expansion energies have been achieved by us in the Bremen drop tower as required for extending atom interferometry over several seconds [9]. Extending these methods to quantum mixtures not only opens up new physics in the absence of buoyancy, but also faces challenges regarding their use for interferometry. Interferometers based on two chemical elements have been proposed for quantum tests of the equivalence principle on the ISS as well as on satellites. Currently we prepare a sounding rocket mission to investigate the simultaneous generation and manipulation of potassium and rubidium condensates [10]. Together with CAL [7], these experiments will prepare the DLR-NASA multi-user facility BECCAL for research on quantum gas mixtures and interferometry [11] as well as enhance the readiness level of methods required for STE-QUEST [12], a proposal for a satellite mission currently studied in an modified version within ESA’s VOYAGE 2050 program [13].

International Conference on Space Optics (ICSO)•Jul 12, 2023•0 citations

Vacuum systems for cold atom sensors on microgravity platforms

Marvin G. Warner, Jens Große, Lisa Wörner +2 more

Cooling atoms to Nano-Kelvin requires an ultra-high vacuum system with complex features, such as coated optical accesses, paramagnetic materials, or differential pumping stages. Furthermore, the sensitivity of atom interferometers, one promising application of ultra-cold atoms, scales with the free evolution time (T) of the cold ensembles. In order to increase T, microgravity becomes necessary. Hence, the development of reliable, miniaturized UHV systems with the capability to withstand the rough environment of microgravity platforms is a key task to pave the way for high performance cold atom instruments. In order to minimize such complex vacuum systems various tests have to be performed. For instance the measurement of outgassing rates for critical components inside the chamber and leakage rates of metal sealed windows allow a more detailed dimensioning of the vacuum pumps. In addition to the challenge of miniaturization, most of the microgravity platforms are linked to a rough thermal and mechanical environment. Vacuum pumps and seals are supposed to endure vibrations and loads of rocket launches or drop tower impacts. In the case of the sounding rocket mission MAIUS, the motors induced loads to the payload of up to 13 g. This talk presents the challenges for vacuum systems on microgravity platforms. Test beds for outgassing rate measurement, window sealing technologies and loaded CF flanges are shown and first results for the tests are given

•Jan 1, 2019•0 citations

Atom interferometry in an Einstein Elevator

Célia Pelluet, Romain Arguel, Martin Rabault +5 more

Recent advances in atom interferometry have led to the development of quantum inertial sensors with outstanding performance in terms of sensitivity, accuracy, and long-term stability. For ground-based implementations, these sensors are ultimately limited by the free-fall height of atomic fountains required to interrogate the atoms over extended timescales. This limitation can be overcome in Space and in unique “microgravity” facilities such as drop towers or free-falling aircraft. These facilities require large investments, long development times, and place stringent constraints on instruments that further limit their widespread use. In this work, we present a new approach in which atom interferometry is performed in a laboratory-scale Einstein Elevator. We demonstrate an acceleration sensitivity of 6 × 10−7 m/s2 per shot, with a total interrogation time of 2T = 200 ms. We further demonstrate the capability to perform long-term statistical studies by operating the Einstein Elevator over several days with high reproducibility. We present atom interferometry performed in a laboratory-scale Einstein Elevator over several days with high reproducibility. This table-top experiment enables long-term metrological assessments of quantum inertial sensors in microgravity.

arXiv:2407.07183•Nature Communications•May 23, 2025•14 citations

Atoms in Space

Manuel Schilling

"What are atoms doing in space anyways?" This talk will provide a brief overview of applications of quantum technologies in space ranging from precise timing and inertial measurements to fundamental physics. Quantum technologies have seen a wide field of applications in medicine, geosciences, computing and communications, in many cases bridging the gap from laboratory experiments to commercial products in the last decade. For terrestrial applications that is. But what about going to space? Quantum physics based sensors and experiments promise higher accuracy, sensitivity or better long term stability as they rely on immutable properties of atoms. When properly manipulated, these (ultra-)cold atoms are likely to outperform state of the art instruments. Experiments conducted on sounding rockets demonstrated important steps like Bose-Einstein Condensate creation during a few minutes in microgravity, enabling more advanced quantum experiments in the future. The International Space Station and the Tiangong Space Station host dedicated experiments like ultrastable clocks as well as flexible research infrastructure for fundamental research benefitting from long free-fall times. However, the deployment of such technologies on satellites is not as advanced. Satellite missions utilizing quantum sensors or performing long term experiments are subject to studies and proposals backed by a broad scientific community aiming at better understanding of climate change, interplanetary navigation or tests of general relativity. First steps towards realization of such missions are taken by ESA, NASA and various national space agencies as well as universities funded by national agencies or the EU. This talk will detect the current state of atoms in space and give an overview of active programs to deploy quantum sensors on operational satellite missions. The focus is on future applications in geosciences and related fields employing the same technology.

•Jan 1, 2025•0 citations
Abstract Microgravity platforms enable cold atom research beyond experiments in typical laboratories by removing restrictions due to the gravitational acceleration or compensation techniques. While research in space allows for undisturbed experimentation, technological readiness, availability and accessibility present challenges for experimental operation. In this work we focus on the main capabilities and unique features of ground-based microgravity facilities for cold atom research. A selection of current and future scientific opportunities and their high demands on the microgravity environment are presented, and some relevant ground-based facilities are discussed and compared. Specifically, we point out the applicable free fall times, repetition rates, stability and payload capabilities, as well as programmatic and operational aspects of these facilities. These are contrasted with the requirements of various cold atom experiments. Besides being an accelerator for technology development, ground-based microgravity facilities allow fundamental and applied research with the additional benefit of enabling hands-on access to the experiment for modifications and adjustments.
Abstract Microgravity eases several constraints limiting experiments with ultracold and condensed atoms on ground. It enables extended times of flight without suspension and eliminates the gravitational sag for trapped atoms. These advantages motivated numerous initiatives to adapt and operate experimental setups on microgravity platforms. We describe the design of the payload, motivations for design choices, and capabilities of the Bose-Einstein Condensate and Cold Atom Laboratory (BECCAL), a NASA-DLR collaboration. BECCAL builds on the heritage of previous devices operated in microgravity, features rubidium and potassium, multiple options for magnetic and optical trapping, different methods for coherent manipulation, and will offer new perspectives for experiments on quantum optics, atom optics, and atom interferometry in the unique microgravity environment on board the International Space Station.
Quantum sensors based on the interference of cold atoms have advanced to the forefront of precision measurements in geodesy, metrology and tests of fundamental physics. The ultimate potential of these devices is realized using quantum degenerate atoms in extended free fall. This can be achieved on microgravity platforms such as drop towers, parabolic flights, ballistic rockets, satellites and space stations. The transition to mobile and robust devices that can withstand the demands of these environments comes with many challenges. Quantum sensors need to be scaled down and integrated without compromising their performance. In fact, they need to significantly outpace conventional instruments, since microgravity time is an expensive resource and limited to a few seconds at a time on the most accessible platforms. This thesis describes the construction, qualification and operation of a miniaturized ultracold atom experiment that meets these challenges. The QUANTUS-2 apparatus features a payload weight of 147 kg and a payload volume of 0.3 m^3. It generates Bose-Einstein condensates of 4×10^5 ^87Rb atoms every 1.6 seconds, a flux of ultra-cold atoms that is on par with the best lab-sized devices. Ensembles of 1×10^5 atoms can be created at a 1 Hz rate. It is currently the fastest machine of its kind and achieves the highest atom number of any atom chip setup. The apparatus continuously withstands peak accelerations of up to 45 g during microgravity campaigns at the drop tower facility in Bremen, Germany. Here, the payload has accrued 208 drops and 9 catapult launches over 24 month. The setup is the first atom optics experiment to stand up to the technical demands of catapult operation. Four condensates can be created and observed consecutively during nine seconds of free fall in a single catapult launch. In total, the experiment has been suspended in microgravity for over 17 minutes. With the record source performance, the repetition rate for microgravity experiments with ultra-cold atoms was increased by a factor of four compared to previous devices. The total atom number was increased by a factor of 40, vastly improving the signal to noise ratio for absorption images of spatially extended clouds. The ensembles can be prepared consistently over many weeks of drop tower operation. The variance of the mean center of mass velocity in two observable directions is 7.3 μm/s and 6.9 μm/s. Magnetic lensing techniques were employed to manipulate the expansion of the ensembles. First results yield a residual expansion rate in three dimensions of σ_v = 116.9 ± 13.9 μm/s, which implies a three-dimensional effective temperature of T = 47.6 ± 11.3 pK at an average condensate atom number of N = 93000. These values constitute the best collimation of any atomic ensemble and the most promising source for atom interferometry reported to date. Optimizing the current lensing sequence will reduce the expansion rate further to effective temperatures in the femtokelvin regime. The level of control demonstrated over the condensates is highly relevant for the advancement of matter-wave optics and quantum sensors. Controlling the motion and size of atomic clouds is intrinsically tied to many systematic effects in high precision measurements. QUANTUS-2 will provide a platform to explore and mitigate these limitations on unprecedented time scales of up to seven seconds of free evolution.
Ultra-cold quantum gases in space promise to boost the sensitivity of matter-wave interferometers. Applications of the latter extend from fundamental physics over the use in navigation to interdisciplinary applications such as geodesy, e.g. satellite gravimetry [1, 2]. Exploiting quantum gases for high-precision interferometry places high demands on their control and manipulation. We take benefit of various microgravity platforms such as the Bremen drop tower [3], the Einstein elevator in Hannover [4], sounding rockets [5,6] and the international space station [7] to advance the necessary methods. The DLR-mission MAIUS-1 demonstrated Bose-Einstein condensation and performed first interferometry experiments [4]. NASA’s Cold Atom Laboratory continues this research in orbit on the ISS [7]. In addition, atom interferometry is pursued in highly dynamic environments such as parabolic flights [8]. Starting from a rubidium Bose-Einstein condensate, recently lowest expansion energies have been achieved by us in the Bremen drop tower as required for extending atom interferometry over several seconds [9]. Extending these methods to quantum mixtures not only opens up new physics in the absence of buoyancy, but also faces challenges regarding their use for interferometry. Interferometers based on two chemical elements have been proposed for quantum tests of the equivalence principle on the ISS as well as on satellites. Currently we prepare a sounding rocket mission to investigate the simultaneous generation and manipulation of potassium and rubidium condensates [10]. Together with CAL [7], these experiments will prepare the DLR-NASA multi-user facility BECCAL for research on quantum gas mixtures and interferometry [11] as well as enhance the readiness level of methods required for STE-QUEST [12], a proposal for a satellite mission currently studied in an modified version within ESA’s VOYAGE 2050 program [13].
Cooling atoms to Nano-Kelvin requires an ultra-high vacuum system with complex features, such as coated optical accesses, paramagnetic materials, or differential pumping stages. Furthermore, the sensitivity of atom interferometers, one promising application of ultra-cold atoms, scales with the free evolution time (T) of the cold ensembles. In order to increase T, microgravity becomes necessary. Hence, the development of reliable, miniaturized UHV systems with the capability to withstand the rough environment of microgravity platforms is a key task to pave the way for high performance cold atom instruments. In order to minimize such complex vacuum systems various tests have to be performed. For instance the measurement of outgassing rates for critical components inside the chamber and leakage rates of metal sealed windows allow a more detailed dimensioning of the vacuum pumps. In addition to the challenge of miniaturization, most of the microgravity platforms are linked to a rough thermal and mechanical environment. Vacuum pumps and seals are supposed to endure vibrations and loads of rocket launches or drop tower impacts. In the case of the sounding rocket mission MAIUS, the motors induced loads to the payload of up to 13 g. This talk presents the challenges for vacuum systems on microgravity platforms. Test beds for outgassing rate measurement, window sealing technologies and loaded CF flanges are shown and first results for the tests are given
Recent advances in atom interferometry have led to the development of quantum inertial sensors with outstanding performance in terms of sensitivity, accuracy, and long-term stability. For ground-based implementations, these sensors are ultimately limited by the free-fall height of atomic fountains required to interrogate the atoms over extended timescales. This limitation can be overcome in Space and in unique “microgravity” facilities such as drop towers or free-falling aircraft. These facilities require large investments, long development times, and place stringent constraints on instruments that further limit their widespread use. In this work, we present a new approach in which atom interferometry is performed in a laboratory-scale Einstein Elevator. We demonstrate an acceleration sensitivity of 6 × 10−7 m/s2 per shot, with a total interrogation time of 2T = 200 ms. We further demonstrate the capability to perform long-term statistical studies by operating the Einstein Elevator over several days with high reproducibility. We present atom interferometry performed in a laboratory-scale Einstein Elevator over several days with high reproducibility. This table-top experiment enables long-term metrological assessments of quantum inertial sensors in microgravity.
"What are atoms doing in space anyways?" This talk will provide a brief overview of applications of quantum technologies in space ranging from precise timing and inertial measurements to fundamental physics. Quantum technologies have seen a wide field of applications in medicine, geosciences, computing and communications, in many cases bridging the gap from laboratory experiments to commercial products in the last decade. For terrestrial applications that is. But what about going to space? Quantum physics based sensors and experiments promise higher accuracy, sensitivity or better long term stability as they rely on immutable properties of atoms. When properly manipulated, these (ultra-)cold atoms are likely to outperform state of the art instruments. Experiments conducted on sounding rockets demonstrated important steps like Bose-Einstein Condensate creation during a few minutes in microgravity, enabling more advanced quantum experiments in the future. The International Space Station and the Tiangong Space Station host dedicated experiments like ultrastable clocks as well as flexible research infrastructure for fundamental research benefitting from long free-fall times. However, the deployment of such technologies on satellites is not as advanced. Satellite missions utilizing quantum sensors or performing long term experiments are subject to studies and proposals backed by a broad scientific community aiming at better understanding of climate change, interplanetary navigation or tests of general relativity. First steps towards realization of such missions are taken by ESA, NASA and various national space agencies as well as universities funded by national agencies or the EU. This talk will detect the current state of atoms in space and give an overview of active programs to deploy quantum sensors on operational satellite missions. The focus is on future applications in geosciences and related fields employing the same technology.