Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Optics and Photonics

Experimental Verification of Heralded Single Photon Generation by Second Order Degree of Coherence

Hoda Sadat Lotfipour, Majid Khodabandeh, Zahra Bagheri, Hassan Sobhani

Published Jul 1, 2022• 3 citations
Publisher

Abstract

This paper describes the secondorder coherence degree of photons produced in SPDC.First, the nonlinear BBO crystal generates the twin correlated signal and idler photons in the experimental setup.Then, g 2 (0) is obtained experimentally via Hanbury Brown-Twiss set-up for investigation of the light source nature.The results show this value is less than 1 which verifies the generated photons are in the heralded single photon (HSP) regime.

DOI
10.52547/ijop.16.2.145

Related papers

Experimental Investigation of the Second-order Degree of Coherence for the Various Light Fields

Diao Wen-tin

We investigated the properties of various light fields based on the Hanbury-Brown-Twiss(HBT)experiment consisted by two single-photon-counting modules(SPCMs),one 50/50beam splitter and the Fast-Com P7888card.Having experimentally investigated the second-order degree of coherence g2(τ)for the continuous-wave and the pulse lasers and the single-photon source generated by single atom,we confirmed the experiment results by theoretical analysis.Specially,we have achieved a high quality of single-photon source based on single atom trapped in the magnetic-optical trap and the far-off-resonance trap with g(2)(τ=0)=0.09and g(2)(τ=0)=0.08,respectively.Using the pulse laser and the single atom,we can perform the triggered single photon experiment.

Acta Sinica Quantum Optica•Jan 1, 2014•0 citations

Qualification and Simulation of a Single Photon Source

Máté Galambos, Petra Seres, Eszter Udvary

Single-photon sources are key components of a quantum communication network; however, present-day realizations of such photon sources do not yet show an ideal behavior. A quantitative way to qualify them is by calculating the second order correlation function, as done in the Hanbury Brown-Twiss (HBT) experiment [1]. In this study a Bell-source that produces an entangled Bell sate was used as a single-photon source. When one branch is used as heralding for the other the source produces sub-Poisson photon statistics. This is not true for the non-heralded case. While conducting the HBT experiment in the non-heralded case we came across a phenomenon of double coincidence peaks. Through our study we found that this could be a result of two very distinct phenomenon, one of which is due to the non-ideal behavior of a single-photon source, the other due to secondary photons generated by single-photon avalanche diodes (SPADs). Both an ideal sub-Poisson statistic and the double coincidence peaks result in g(2)(0) = 0 by the HBT experiment, but in the first case the photon source is indeed an actual single-photon source, while in the second case this could also happen with a non-ideal single-photon source. For that reason, sometimes it is not sufficient to rely only on the HBT experiment to qualify a single-photon source, but also conduct some deeper experiments.

International Conference on Transparent Optical Networks•Jul 6, 2025•0 citations

Experiments related to generating single photons

Muhammad Sabieh Anwar, Faizan-e-Ilahi, Syed Bilal Hyder +1 more

To conduct experiments with photons, we must first obtain a source of photons. In this chapter dedicated to the setup of a single photon source, we will discuss two experiments. In the first experiment, we will see how to downconvert light using BBO crystals and how heralded detection enables us to capture single photons from the downconverted light. In the second experiment, we will run an essential test of the second-order correlation function to check if the claimed photon source follows the detection statistics of a typical single photon source.

Institute of Physics eBooks•Aug 1, 2024•0 citations

A heralded single-photon source implemented with second-order nonlinear photonic crystals

Hiroo Azuma

Abstract We study implementing a heralded single-photon source with second-order nonlinear photonic crystals. Injecting pump and signal light beams into a one-dimensional photonic crystal composed of a material with a large second-order nonlinear optical susceptibility χ ( 2 ) , we can transform the coherent incident signal light into squeezed light. Preparing two squeezed light beams by this method and input them into two ports of a 50-50 beam splitter independently, we can transform them into a two-mode squeezed state. Because those two modes of photons share entanglement, a single photon of the one mode is emitted with a high probability on the condition of the single-photon detection of the other mode as a heralding signal. We evaluate the efficiency and the second-order intensity correlation function g ( 2 ) ( 0 ) for this heralded single-photon source. Moreover, we examine changes in the efficiency and g ( 2 ) ( 0 ) when we assume that the single-photon detector for the heralding signal is imperfect. For a specific concrete example, we consider a case where the nonlinear medium is lithium niobate LiNbO 3 and the frequency of the incident signal light is on the order of 1014 Hz.

arXiv:2503.14920•Journal of Physics D Applied Physics•Jul 11, 2025•0 citations

Comment on “Coherence measures for heralded single-photon sources”

Stefano Bettelli

A recent Brief Report [Phys. Rev. A 79, 035801 (2009)] investigates two figures of merit for heralded photon sources based on spontaneous parametric down-conversion with a continuous pump, namely, the time-averaged temporal coherence between the signal and idler beams and the time-averaged conditioned second-order degree of coherence for photons in the heralded arm. However, contrary to what is claimed, no one-arm second-order effect is actually measured.

arXiv:0911.1478•Physical Review A•Mar 18, 2010•23 citations

Single-Photon Generation Assisted by a Nonlinear Material with High Purity and Yield

M. A. A. Rahim, Mohd Amir Radhi Othman

Single-photon sources that emit only one photon at a time with high yield are important for security and efficiency in quantum communication and computation, respectively. One method to develop the desired single-photon source is through entangled single-photon pairs from spontaneous parametric down-conversion (SPDC) crystals where detection of idler photons “heralds” the presence of signal photons. If the SPDC crystal is pumped with weak intensity laser, high purity heralded single photons can be produced at the cost of low yield. Increasing the yield by using stronger laser intensity inevitably decreases the purity due to the presence of multiple photons. Here, we propose a conceptual method to overcome this trade-off between single-photon purity and single-photon yield. Our setup consists of a weakly pumped SPDC crystal seeded with strong coherent states (CS) at the idler mode. Clicks on a click detector at the idler mode conditionally prepare a superposition state of zero-, one-, and two-photon Fock states (FS) at the signal mode. By employing repeated processes of infinitesimal displacement (ID) and two-photon elimination (PE), we can obtain a final state of one-photon FS. Based on the heralding probability (single-photon yield) and single-photon fidelity (single-photon purity), we found that our method transforms the initial state with high heralding probability but low single-photon fidelity (near minimum) to a final state with high heralding probability and high single-photon fidelity (maximum). Furthermore, we discussed the conditions required for the experimental implementations of the processes. Thus, our work paves the way to producing heralded single photons with high purity and yield in SPDC sources.

Apple Academic Press eBooks•Feb 26, 2025•0 citations
This paper describes the secondorder coherence degree of photons produced in SPDC.First, the nonlinear BBO crystal generates the twin correlated signal and idler photons in the experimental setup.Then, g 2 (0) is obtained experimentally via Hanbury Brown-Twiss set-up for investigation of the light source nature.The results show this value is less than 1 which verifies the generated photons are in the heralded single photon (HSP) regime.
We investigated the properties of various light fields based on the Hanbury-Brown-Twiss(HBT)experiment consisted by two single-photon-counting modules(SPCMs),one 50/50beam splitter and the Fast-Com P7888card.Having experimentally investigated the second-order degree of coherence g2(τ)for the continuous-wave and the pulse lasers and the single-photon source generated by single atom,we confirmed the experiment results by theoretical analysis.Specially,we have achieved a high quality of single-photon source based on single atom trapped in the magnetic-optical trap and the far-off-resonance trap with g(2)(τ=0)=0.09and g(2)(τ=0)=0.08,respectively.Using the pulse laser and the single atom,we can perform the triggered single photon experiment.
Single-photon sources are key components of a quantum communication network; however, present-day realizations of such photon sources do not yet show an ideal behavior. A quantitative way to qualify them is by calculating the second order correlation function, as done in the Hanbury Brown-Twiss (HBT) experiment [1]. In this study a Bell-source that produces an entangled Bell sate was used as a single-photon source. When one branch is used as heralding for the other the source produces sub-Poisson photon statistics. This is not true for the non-heralded case. While conducting the HBT experiment in the non-heralded case we came across a phenomenon of double coincidence peaks. Through our study we found that this could be a result of two very distinct phenomenon, one of which is due to the non-ideal behavior of a single-photon source, the other due to secondary photons generated by single-photon avalanche diodes (SPADs). Both an ideal sub-Poisson statistic and the double coincidence peaks result in g(2)(0) = 0 by the HBT experiment, but in the first case the photon source is indeed an actual single-photon source, while in the second case this could also happen with a non-ideal single-photon source. For that reason, sometimes it is not sufficient to rely only on the HBT experiment to qualify a single-photon source, but also conduct some deeper experiments.
To conduct experiments with photons, we must first obtain a source of photons. In this chapter dedicated to the setup of a single photon source, we will discuss two experiments. In the first experiment, we will see how to downconvert light using BBO crystals and how heralded detection enables us to capture single photons from the downconverted light. In the second experiment, we will run an essential test of the second-order correlation function to check if the claimed photon source follows the detection statistics of a typical single photon source.
Abstract We study implementing a heralded single-photon source with second-order nonlinear photonic crystals. Injecting pump and signal light beams into a one-dimensional photonic crystal composed of a material with a large second-order nonlinear optical susceptibility χ ( 2 ) , we can transform the coherent incident signal light into squeezed light. Preparing two squeezed light beams by this method and input them into two ports of a 50-50 beam splitter independently, we can transform them into a two-mode squeezed state. Because those two modes of photons share entanglement, a single photon of the one mode is emitted with a high probability on the condition of the single-photon detection of the other mode as a heralding signal. We evaluate the efficiency and the second-order intensity correlation function g ( 2 ) ( 0 ) for this heralded single-photon source. Moreover, we examine changes in the efficiency and g ( 2 ) ( 0 ) when we assume that the single-photon detector for the heralding signal is imperfect. For a specific concrete example, we consider a case where the nonlinear medium is lithium niobate LiNbO 3 and the frequency of the incident signal light is on the order of 1014 Hz.
Single-photon sources that emit only one photon at a time with high yield are important for security and efficiency in quantum communication and computation, respectively. One method to develop the desired single-photon source is through entangled single-photon pairs from spontaneous parametric down-conversion (SPDC) crystals where detection of idler photons “heralds” the presence of signal photons. If the SPDC crystal is pumped with weak intensity laser, high purity heralded single photons can be produced at the cost of low yield. Increasing the yield by using stronger laser intensity inevitably decreases the purity due to the presence of multiple photons. Here, we propose a conceptual method to overcome this trade-off between single-photon purity and single-photon yield. Our setup consists of a weakly pumped SPDC crystal seeded with strong coherent states (CS) at the idler mode. Clicks on a click detector at the idler mode conditionally prepare a superposition state of zero-, one-, and two-photon Fock states (FS) at the signal mode. By employing repeated processes of infinitesimal displacement (ID) and two-photon elimination (PE), we can obtain a final state of one-photon FS. Based on the heralding probability (single-photon yield) and single-photon fidelity (single-photon purity), we found that our method transforms the initial state with high heralding probability but low single-photon fidelity (near minimum) to a final state with high heralding probability and high single-photon fidelity (maximum). Furthermore, we discussed the conditions required for the experimental implementations of the processes. Thus, our work paves the way to producing heralded single photons with high purity and yield in SPDC sources.