Quantum continuous variable systems are quantum systems obeying the canonical commutation relations. As we have seen in the previous chapter, such systems always require the adoption of infinite-dimensional Hilbert spaces, even when a finite number of degrees of freedom is considered. Besides making their dynamics potentially intractable, this fact also implies that the study of properties related to the information and correlation content of continuous variable systems turns out to be particularly difficult. A widely known way to make continuous variable systems more tractable is to consider the restriction to Gaussian states. Already well trodden in older research on quantum optics, the study of Gaussian systems has more recently become a central theme of continuous variable quantum information. If open quantum systems, coupled to an external environment, are considered, the Gaussian regime applies when the system couples linearly to its environment and when system and environment are governed by Hamiltonians which are at most quadratic in the canonical operators (or, equivalently, when the overall Hamiltonian of system and environment is at most quadratic). These conditions may seem rather restrictive but, as we shall point out in the course of the book, are actually ordinarily met by a vast number of existing experimental set-ups in the areas of quantum optics, trapped ions, optomechanics, atomic ensembles and certain superconducting degrees of freedom (all of these platforms are reviewed in Chapter 9 ). What we will refer to as Gaussian measurements – POVMs that preserve the Gaussian character of initial states – are also customarily carried out with comparatively high efficiency, while the description of quantum noise can be incorporated seamlessly into the Gaussian picture. What is perhaps even more important to note is that the restriction to the Gaussian realm, while not exhaustive of the full wealth of dynamics and situations allowed in the whole Hilbert space, still lets one include most of the processes relevant to quantum technologies. Squeezing, whereby certain canonical quadratures have uncertainties below the vacuum state noise, and can hence be used in precision measurements, quantum entanglement, and cooling, where the entropy is drained out of a system in order to reach a pure quantum state and thus initialise information protocols or low noise experiments, may all be described within the Gaussian regime. Within the quantum information discourse, the Gaussian restriction has been often criticised on the grounds that no real genuinely quantum effects can ever be observed without leaving it at some point, since the statistics obtained from Gaussian states through Gaussian measurements can be reproduced by classical probability distributions. While technically correct, the reader should be reminded that such critiques often disregard the fact that the object described by a Gaussian state does entail a genuinely quantum description in a Hilbert space. Hence, for instance, the preparation of a pure Gaussian quantum state is the preparation of a pure vector of the Hilbert space. Likewise, a highly squeezed Gaussian state prepared for a metrological protocol is a state with very low noise in a certain physical observable, regardless of whether it can be mimicked by a classical distribution or not. The testing and exploitation of quantum non-locality (stronger than classical correlations that imply the presence of quantum entanglement) with Gaussian states does instead require a departure from Gaussian measurements. However, as we will see, certain non-Gaussian measurements are customarily implemented with current technology, and it is hence still relevant to study in detail the creation of such a resource for Gaussian states. This chapter will introduce Gaussian states from a somewhat unusual angle: as ground and thermal states of at most second-order Hamiltonians. Our treatment will highlight the privileged role played by quadratic canonical ( i.e. , ‘symplectic’) transformations in this context, which we will take care to describe in full generality, and will hinge on the reduction of Gaussian states into their normal modes, which allows for their systematic diagonalisation. We will then proceed to explore an equivalent characterisation in terms of statistical moments of the canonical operators, and to introduce the implications of non-commutativity on such statistics in the form of the Robertson–Schrödinger uncertainty relation.
Quantum continuous variable systems are quantum systems obeying the canonical commutation relations. As we have seen in the previous chapter, such systems always require the adoption of infinite-dimensional Hilbert spaces, even when a finite number of degrees of freedom is considered. Besides making their dynamics potentially intractable, this fact also implies that the study of properties related to the information and correlation content of continuous variable systems turns out to be particularly difficult. A widely known way to make continuous variable systems more tractable is to consider the restriction to Gaussian states. Already well trodden in older research on quantum optics, the study of Gaussian systems has more recently become a central theme of continuous variable quantum information. If open quantum systems, coupled to an external environment, are considered, the Gaussian regime applies when the system couples linearly to its environment and when system and environment are governed by Hamiltonians which are at most quadratic in the canonical operators (or, equivalently, when the overall Hamiltonian of system and environment is at most quadratic). These conditions may seem rather restrictive but, as we shall point out in the course of the book, are actually ordinarily met by a vast number of existing experimental set-ups in the areas of quantum optics, trapped ions, optomechanics, atomic ensembles and certain superconducting degrees of freedom (all of these platforms are reviewed in Chapter 9 ). What we will refer to as Gaussian measurements – POVMs that preserve the Gaussian character of initial states – are also customarily carried out with comparatively high efficiency, while the description of quantum noise can be incorporated seamlessly into the Gaussian picture. What is perhaps even more important to note is that the restriction to the Gaussian realm, while not exhaustive of the full wealth of dynamics and situations allowed in the whole Hilbert space, still lets one include most of the processes relevant to quantum technologies. Squeezing, whereby certain canonical quadratures have uncertainties below the vacuum state noise, and can hence be used in precision measurements, quantum entanglement, and cooling, where the entropy is drained out of a system in order to reach a pure quantum state and thus initialise information protocols or low noise experiments, may all be described within the Gaussian regime. Within the quantum information discourse, the Gaussian restriction has been often criticised on the grounds that no real genuinely quantum effects can ever be observed without leaving it at some point, since the statistics obtained from Gaussian states through Gaussian measurements can be reproduced by classical probability distributions. While technically correct, the reader should be reminded that such critiques often disregard the fact that the object described by a Gaussian state does entail a genuinely quantum description in a Hilbert space. Hence, for instance, the preparation of a pure Gaussian quantum state is the preparation of a pure vector of the Hilbert space. Likewise, a highly squeezed Gaussian state prepared for a metrological protocol is a state with very low noise in a certain physical observable, regardless of whether it can be mimicked by a classical distribution or not. The testing and exploitation of quantum non-locality (stronger than classical correlations that imply the presence of quantum entanglement) with Gaussian states does instead require a departure from Gaussian measurements. However, as we will see, certain non-Gaussian measurements are customarily implemented with current technology, and it is hence still relevant to study in detail the creation of such a resource for Gaussian states. This chapter will introduce Gaussian states from a somewhat unusual angle: as ground and thermal states of at most second-order Hamiltonians. Our treatment will highlight the privileged role played by quadratic canonical ( i.e. , ‘symplectic’) transformations in this context, which we will take care to describe in full generality, and will hinge on the reduction of Gaussian states into their normal modes, which allows for their systematic diagonalisation. We will then proceed to explore an equivalent characterisation in terms of statistical moments of the canonical operators, and to introduce the implications of non-commutativity on such statistics in the form of the Robertson–Schrödinger uncertainty relation.
Quantum continuous variable systems are quantum systems obeying the canonical commutation relations. The testing and exploitation of quantum non-locality (stronger than classical correlations that imply the presence of quantum entanglement) with Gaussian states does instead require a departure from Gaussian measurements. Certain non-Gaussian measurements are customarily implemented with current technology, and it is hence still relevant to study in detail the creation of such a resource for Gaussian states. This chapter introduces Gaussian states from a somewhat unusual angle: as ground and thermal states of at most second-order Hamiltonians. The treatment highlights the privileged role played by quadratic canonical i.e '., symplectic' transformations in this context, and hinges on the reduction of Gaussian states into their normal modes, which allows for their systematic diagonalisation. It also discusses another equivalent parametrisation of a generic Gaussian state, deriving a more direct rendition of the spectrum of a Gaussian state in terms of observable parameters.
The characterisation of quantum correlations, also known as entanglement, is central to quantum information theory. Operationally, entanglement gives rise to the notion of quantum non-locality, which challenges the ‘reality’ of quantum mechanics (adopting the terminology of Einstein, Podolski and Rosen) and arguably represents its most distinctive feature, in the sense that it calls for a departure from certain foundational tenets of classical physics. It should thus not come as a surprise that entanglement turns out to be a key resource for the implementation of a number of quantum communication protocols and also necessary to achieve computational speed-ups with quantum hardware, in the sense that accessing regions of the Hilbert space with entangled states allows one to shorten the computational depth of certain algorithms. Not surprisingly, generating and maintaining entanglement is generally difficult in practice, as it requires strong interactions between selected components of a system that must at the same time be isolated from the environment. Thanks to the techniques developed in quantum optical set-ups to achieve squeezed light, entanglement is, however, comparatively accessible with optical quantum continuous variables. As we shall see, in fact, continuous variable entanglement is closely related to the notion of squeezing. It is therefore of the utmost importance to be able to qualify and quantify the entanglement of quantum continuous variables, which is the subject matter of the present chapter. The first part of the chapter is devoted to techniques and criteria based on second moments to detect the entanglement of Gaussian states and also to the description of possible ways to quantify such quantum correlations, bearing in mind that the determination of entanglement monotones of clear operational significance is still an open problem, even in the restricted arena of Gaussian states. Although the criteria based on second moments are sufficient, but not necessary, for the detection of non-Gaussian entanglement too, we will push our analysis further by introducing more general criteria based on higher order statistical moments, which will be put to use to detect, on paper, the quantum correlations of an entangled cat-like state. We will also address the issues of entanglement distillation and quantum non-locality tests, in whose contexts we shall encounter other non-Gaussian operations and states, such as photon-subtracted states.
With the exception of references made to optical elements and detection techniques when discussing Gaussian operations and POVMs, and in their applications, the theory developed in this book has been largely presented as an abstract mathematical construction. This chapter intends to liaise our theoretical pictures to the wide world of controllable, coherent quantum systems that share the continuous variable description. Emphasis will be on the emergence of the canonical commutation relations in different contexts and on the introduction of the relevant Hamiltonian descriptions with the understanding that, once the basic formal analogy is established, the approaches and results of the previous chapters will be in principle applicable to the system at hand. Note, as a caveat, that some of the Hamiltonians listed in this chapter are not quadratic, notably those involving optical nonlinearities, superconducting systems and cold atoms, so that the Gaussian theory would not apply to them. In fact, we shall take the opportunity to briefly discuss the more exhaustive control, beyond the Gaussian regime, allowed by nonlinear Hamiltonians. Upon the description of the corresponding degrees of freedom, we will also venture to sketch two well-known proposals for the realisation of hardware for quantum computation, based respectively on optical modes and trapped ions, where quantum continuous variables play a significant role. The aim of this chapter is hence not providing a thorough and exhaustive discussion of each continuous variable system, but rather to grant the reader a degree of awareness on the possibilities offered by the diverse experimental platforms to which the theory applies. Thus, the conceptual elements will typically overshadow the (often very important when applications are concerned!) technical aspects, and glaring simplifications will be adopted. Given the central role played by the optical embodiment of quantum continuous variables, an exception to this cursory treatment has been made for the quantisation of the electromagnetic field, carried out below in detail from the classical theory. This will also present the opportunity to provide a full derivation of the input-output formalism and the associated quantum Langevin equations, which to our knowledge were never previously dealt with at a pedagogical level in the time domain, and to discuss a bag of quantum optical tools, such as the rotating wave approximation, which, although featuring in a number of introductory quantum optics textbooks, find such wide application to deserve a place in any attempt at a self-contained treatment.
This thesis deals with the study of quantum communication protocols with Continuous Variable (CV) systems. Continuous Variable systems are those described by canonical conjugated coordinates x and p endowed with infinite dimensional Hilbert spaces, thus involving a complex mathematical structure. A special class of CV states, are the so-called Gaussian states. With them, it has been possible to implement certain quantum tasks as quantum teleportation, quantum cryptography and quantum computation with fantastic experimental success. The importance of Gaussian states is two-fold; firstly, its structural mathematical description makes them much more amenable than any other CV system. Secondly, its production, manipulation and detection with current optical technology can be done with a very high degree of accuracy and control. Nevertheless, it is known that in spite of their exceptional role within the space of all Continuous Variable states, in fact, Gaussian states are not always the best candidates to perform quantum information tasks. Thus non-Gaussian states emerge as potentially good candidates for communication and computation purposes.
The theoretical toolbox we have developed as the book unfolded will now be put to use to describe a series of tasks, related to the transmission or extraction of information, which may be implemented with quantum continuous variable systems. We will open with quantum teleportation, the transmission of a quantum state through shared quantum entanglement and classical communication, and determine certain thresholds it must attain to be considered genuinely quantum; we shall then proceed to establish the maximum classical communication capacity of a class of Gaussian channels; next, the optimal estimation of a dynamical parameter using Gaussian states as probes will be considered; we will then show that Gaussian states may be used for the secure distribution of a cryptographic key; finally, our enquiry will close with the illustration of a sampling algorithm aimed at achieving a ‘quantum advantage’ over competing classical methods. It is worth mentioning that, in discussing teleportation thresholds and communication capacities, although the optimal schemes we shall identify will turn out to be Gaussian, we will confront full optimisations at the Hilbert space level, and will thus introduce methods that go beyond the Gaussian description. Gaussian quantum key distribution has already been commercialised, Gaussian boson sampling has already been applied to claim a quantum advantage, and all the other techniques we will touch on in this chapter are gradually approaching the status of full-blown engineering technologies, which would arguably form the most convincing empirical evidence one may have in support of the underlying physical theory.
Gaussian operations, as one usually refers to CP-maps that send Gaussian states to Gaussian states, are apt to model a wide range of situations of practical interest and may often be controlled and applied on demand in the laboratory, in a variety of set-ups (that will be the subject matter of Chapter 9 ). Furthermore, they can be classified in a hierarchy of compact, powerful and far-reaching theoretical descriptions, which will be introduced by degrees and discussed in the current chapter. Note that here we are dealing with discrete quantum operations, rather than dynamical equations, which will be dealt with in the next chapter. We shall start from Gaussian unitary operations, corresponding to the symplectic group already introduced in Chapter 3 , and will also clarify how other basic manipulations such as tensoring and partial tracing carry over to the Gaussian picture. Then, we shall broaden our view to include all deterministic (trace-preserving) maps resulting from Gaussian unitary dilations, which are often known as the set of ‘bosonic Gaussian channels’ and encompass open dynamics subject to noise and ‘decoherence’ (the loss of quantum coherence due to the interaction with an environment). Next, we will move on to consider POVMs corresponding to the well-known homodyne and heterodyne detection schemes which, when acting on a subsystem, preserve the Gaussian character of the initial state both when the system is filtered by recording the measurement outcomes, and when acting unconditionally (that is, when the outcome of the measurement is not recorded). Our description will be further enlarged to the wider class of ‘general-dyne’ detections, and we will also introduce methods to account for imperfect detections. The ability to accommodate noise in the analytical description, often daunting with discrete variable and, more generally, outside the Gaussian regime, is probably one of the greatest strengths of the formalism under discussion. Finally, we shall introduce the Gaussian version of the Choi–Jamiolkowski isomorphism, and attain a unified description of all the Gaussian maps previously defined. Throughout our exposition, we will refer to quantum optical systems to exemplify the practical relevance of the operations encountered.