Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Materials

CSRR Structure Design for NV Spin Manipulation with Microwave Strength and Fluorescence Collection Synchronous Enhancement

Yanjie Gao, Hao Guo, Huanfei Wen, Zhonghao Li, Zongmin Ma, Jun Tang, Jun Liu

Published May 14, 2023• 3 citations
Publisher

Abstract

In this work, we designed, simulated, and tested a complementary split ring resonator (CSRR) for the purpose of applying a strong and uniform microwave field for the manipulation of nitrogen vacancy (NV) ensembles. This structure was fabricated by etching two concentric rings on a flat metal film that was deposited on a printed circuit board. A metal transmission on the back plane was used as the feed line. The fluorescence collection efficiency was improved by about 2.5 times with the CSRR structure compared to that without CSRR. Furthermore, the maximum Rabi frequency could reach 11.3 MHz, and the Rabi frequency variation was smaller than 2.8% in an area of 250 × 75 μm. This could pave the way to achieving high-efficiency control of the quantum state for spin-based sensor applications.

DOI
10.3390/ma16103718

Related papers

Modified Split-Ring Resonators for Efficient and Homogeneous Microwave Control of Large Volume Spin Ensembles

Yachel Ben-Shalom, Amir Hen, Nir Bar‐Gill

Quantum sensing using local defects in solid-state systems has gained significant attention over the past several years, with impressive results demonstrated both in academia and in industry. Specifically, using large volume and high-density ensembles for beyond state-of-the-art sensitives is of clear interest. A major obstacle for achieving such record sensitivities is associated with the need to realize strong, homogeneous driving of the sensor defects. Here, we focus on high-frequency microwave sensing using nitrogen-vacancy (NV) centers in diamond and develop a modified split-ring resonator design to address this issue. We demonstrate enhanced drive strengths and homogeneities over large volumes compared with previous results, with prospects for enabling the desired sensitivities. We reach Rabi frequencies of up to 18-MHz with an efficiency ratio of$2~\text {Gauss}/\sqrt {\text {Watt}}$, along with an inhomogeneity of < 0.7% in a volume of 0.1 mm3. This structure also has a narrow form factor that allows for efficient optical coupling and fluorescence collection.

arXiv:2309.11130•IEEE Sensors Journal•May 20, 2024•4 citations

Tunable double split-ring resonator for quantum sensing using nitrogen-vacancy centers in diamond

Yan Yang, Qin Wu, Yangpeng Wang +5 more

For quantum sensing based on nitrogen-vacancies (NV) ensembles, microwave antennas can couple the microwave field to the NV center, which leads it to becoming the core of spin manipulation and can directly affect the sensitivity of quantum sensing. The double split-ring resonator is a widely used microwave device for NV ensembles due to the advantages of high radiation efficiency and uniform magnetic field in millimeter-scale areas. But the bandwidth (30 MHz) is quite narrow which limits the application in quantum sensing with NV ensembles. Here, we experimentally achieve continuous tuning of the resonant frequency of the double split-ring resonator by changing the copper sheet position on the edge of the outer ring. The frequency tuning range can reach 80 MHz, up to 2-3 times the bandwidth, which can cover the transition of the electron spin under different magnetic field conditions. The performance of the tunable antenna in the quantum operation of NV centers is verified by optically detected magnetic resonance and Rabi oscillation. This tunable antenna is promising in the fabrication of integrated and arrayed quantum sensors based on NV ensembles.

Optics Continuum•May 16, 2023•11 citations

Microwave-induced fluorescence of ensemble NV centers using PCB-based RF devices for quantum sensing

Atefe Safinezhad, Aashutosh Kumar, Richard Al Hadi +1 more

Nitrogen-vacancy (NV) centers in diamond are solid-state quantum sensors that operate at room temperature and allow optical readout of spin states through optically detected magnetic resonance (ODMR). Reliable ODMR measurements need controlled microwave excitation to manipulate NV spin states and modulate their fluorescence. In this paper, we report on ensemble NV centers’ interaction with microwave fields transmitted by printed-circuit-board (PCB) radio-frequency (RF) devices. Two microwave structures, a coplanar waveguide transmission line (CPW-TL) and a single-finger interdigitated capacitor (IDC), are designed and impedance-matched at the NV zero-field splitting frequency. Nanodiamond solutions containing NV ensembles are deposited as few-microliter droplets onto the PCB devices and dried, forming localized NV layers on the RF structures. Two-dimensional fluorescence scans are used to link spatial changes in NV fluorescence to the microwave field distributions created by each device geometry. CPW-TLs enable interaction over extended regions along the transmission line, while IDCs produce localized excitation near the capacitive gaps.

Photonics for Quantum (PfQ)•Jul 22, 2026•0 citations

Optimized Planar Microwave Antenna for Nitrogen Vacancy Center Based Sensing Applications

Oliver Opaluch, Nimba Oshnik, Richard Nelz +1 more

Individual nitrogen vacancy (NV) color centers in diamond are versatile, spin-based quantum sensors. Coherently controlling the spin of NV centers using microwaves in a typical frequency range between 2.5 and 3.5 GHz is necessary for sensing applications. In this work, we present a stripline-based, planar, Ω-shaped microwave antenna that enables one to reliably manipulate NV spins. We found an optimal antenna design using finite integral simulations. We fabricated our antennas on low-cost, transparent glass substrate. We created highly uniform microwave fields in areas of roughly 400 × 400 μm2 while realizing high Rabi frequencies of up to 10 MHz in an ensemble of NV centers.

arXiv:2108.09122•Nanomaterials•Aug 19, 2021•44 citations

Tunable and broadband loop gap resonator for nitrogen vacancy centers in diamond

Erik R. Eisenach

Nitrogen vacancy centers in diamond have emerged as a solid-state analog to atomic systems with applications ranging from room temperature quantum computing to quantum sensing and metrology. To date, with notably few exceptions, all NV applications rely on coherent manipulation of spin states via resonant microwave driving. In this thesis the loop gap resonator (LGR) is presented as a mechanism for the delivery of resonantly enhanced and uniform microwave fields to large volume samples of nitrogen vacancy (NV) centers in diamond. Specifically, an S-band tunable LGR and its constituent excitation circuitry are designed and fabricated to enable directionally uniform, strong, homogeneous, and broadband microwave (MW) driving of an NV ensemble over an area larger than 32 mm2 . The LGR design, based on the anode block of a cavity magnetron, demonstrates an average field amplitude of 5 gauss at 42 dBm of input power, and achieves a peak-to-peak field uniformity of 89.5% over an area of 32 mm2 and 97% over an area of 11 mm2 . The broad bandwidth of the LGR is capable of addressing all resonances of an NV ensemble for bias magnetic Fields up to 14 gauss. Furthermore, with cavity ring-down-times in the single nanoseconds, the resonator is compatible with the pulsed MW techniques necessary for a wide range of NV-diamond applications.

•Jan 1, 2018•1 citation

NV center pumped and enhanced by nanowire ring resonator laser to integrate a 10 μ m-scale spin-based sensor structure

Hao Guo, Yanjie Gao, Yue Ning Qin +9 more

Abstract In this work, we propose a 10 μ m-scale spin-based sensor structure, which mainly consists of a nanowire (NW) ring resonator laser, nitrogen-vacancy (NV) defects in a nanodiamond (ND) and a microwave (MW) antenna. The NW laser was bent into a ring with a gap to pump the NV defects in the ND which was assembled in the gap with the diameter of ∼8 μ m. And the fluorescent light of NV defects was enhanced by the NW ring resonator about 8 times. Furthermore, the NW laser pulse was produced by the optical switch and a simple plus-sequences was designed to get the Rabi oscillation signal. Based on the Rabi oscillation, a Ramsey-type sequence was used to detect the magnetic field with the sensitivity of 83 nT √Hz −1 for our 10 μ m-scale spin-based sensor structure. It proves the spin state in our structure allows for coherent spin manipulation for more complex quantum control schemes. And our structure fulfills the fundamental requirements to develop chip-scale spin-based sensors.

Nanotechnology•Oct 16, 2020•5 citations
In this work, we designed, simulated, and tested a complementary split ring resonator (CSRR) for the purpose of applying a strong and uniform microwave field for the manipulation of nitrogen vacancy (NV) ensembles. This structure was fabricated by etching two concentric rings on a flat metal film that was deposited on a printed circuit board. A metal transmission on the back plane was used as the feed line. The fluorescence collection efficiency was improved by about 2.5 times with the CSRR structure compared to that without CSRR. Furthermore, the maximum Rabi frequency could reach 11.3 MHz, and the Rabi frequency variation was smaller than 2.8% in an area of 250 × 75 μm. This could pave the way to achieving high-efficiency control of the quantum state for spin-based sensor applications.
Quantum sensing using local defects in solid-state systems has gained significant attention over the past several years, with impressive results demonstrated both in academia and in industry. Specifically, using large volume and high-density ensembles for beyond state-of-the-art sensitives is of clear interest. A major obstacle for achieving such record sensitivities is associated with the need to realize strong, homogeneous driving of the sensor defects. Here, we focus on high-frequency microwave sensing using nitrogen-vacancy (NV) centers in diamond and develop a modified split-ring resonator design to address this issue. We demonstrate enhanced drive strengths and homogeneities over large volumes compared with previous results, with prospects for enabling the desired sensitivities. We reach Rabi frequencies of up to 18-MHz with an efficiency ratio of2 Gauss/Watt2~\text {Gauss}/\sqrt {\text {Watt}}2 Gauss/Watt​, along with an inhomogeneity of < 0.7% in a volume of 0.1 mm3. This structure also has a narrow form factor that allows for efficient optical coupling and fluorescence collection.
For quantum sensing based on nitrogen-vacancies (NV) ensembles, microwave antennas can couple the microwave field to the NV center, which leads it to becoming the core of spin manipulation and can directly affect the sensitivity of quantum sensing. The double split-ring resonator is a widely used microwave device for NV ensembles due to the advantages of high radiation efficiency and uniform magnetic field in millimeter-scale areas. But the bandwidth (30 MHz) is quite narrow which limits the application in quantum sensing with NV ensembles. Here, we experimentally achieve continuous tuning of the resonant frequency of the double split-ring resonator by changing the copper sheet position on the edge of the outer ring. The frequency tuning range can reach 80 MHz, up to 2-3 times the bandwidth, which can cover the transition of the electron spin under different magnetic field conditions. The performance of the tunable antenna in the quantum operation of NV centers is verified by optically detected magnetic resonance and Rabi oscillation. This tunable antenna is promising in the fabrication of integrated and arrayed quantum sensors based on NV ensembles.
Nitrogen-vacancy (NV) centers in diamond are solid-state quantum sensors that operate at room temperature and allow optical readout of spin states through optically detected magnetic resonance (ODMR). Reliable ODMR measurements need controlled microwave excitation to manipulate NV spin states and modulate their fluorescence. In this paper, we report on ensemble NV centers’ interaction with microwave fields transmitted by printed-circuit-board (PCB) radio-frequency (RF) devices. Two microwave structures, a coplanar waveguide transmission line (CPW-TL) and a single-finger interdigitated capacitor (IDC), are designed and impedance-matched at the NV zero-field splitting frequency. Nanodiamond solutions containing NV ensembles are deposited as few-microliter droplets onto the PCB devices and dried, forming localized NV layers on the RF structures. Two-dimensional fluorescence scans are used to link spatial changes in NV fluorescence to the microwave field distributions created by each device geometry. CPW-TLs enable interaction over extended regions along the transmission line, while IDCs produce localized excitation near the capacitive gaps.
Individual nitrogen vacancy (NV) color centers in diamond are versatile, spin-based quantum sensors. Coherently controlling the spin of NV centers using microwaves in a typical frequency range between 2.5 and 3.5 GHz is necessary for sensing applications. In this work, we present a stripline-based, planar, Ω-shaped microwave antenna that enables one to reliably manipulate NV spins. We found an optimal antenna design using finite integral simulations. We fabricated our antennas on low-cost, transparent glass substrate. We created highly uniform microwave fields in areas of roughly 400 × 400 μm2 while realizing high Rabi frequencies of up to 10 MHz in an ensemble of NV centers.
Nitrogen vacancy centers in diamond have emerged as a solid-state analog to atomic systems with applications ranging from room temperature quantum computing to quantum sensing and metrology. To date, with notably few exceptions, all NV applications rely on coherent manipulation of spin states via resonant microwave driving. In this thesis the loop gap resonator (LGR) is presented as a mechanism for the delivery of resonantly enhanced and uniform microwave fields to large volume samples of nitrogen vacancy (NV) centers in diamond. Specifically, an S-band tunable LGR and its constituent excitation circuitry are designed and fabricated to enable directionally uniform, strong, homogeneous, and broadband microwave (MW) driving of an NV ensemble over an area larger than 32 mm2 . The LGR design, based on the anode block of a cavity magnetron, demonstrates an average field amplitude of 5 gauss at 42 dBm of input power, and achieves a peak-to-peak field uniformity of 89.5% over an area of 32 mm2 and 97% over an area of 11 mm2 . The broad bandwidth of the LGR is capable of addressing all resonances of an NV ensemble for bias magnetic Fields up to 14 gauss. Furthermore, with cavity ring-down-times in the single nanoseconds, the resonator is compatible with the pulsed MW techniques necessary for a wide range of NV-diamond applications.
Abstract In this work, we propose a 10 μ m-scale spin-based sensor structure, which mainly consists of a nanowire (NW) ring resonator laser, nitrogen-vacancy (NV) defects in a nanodiamond (ND) and a microwave (MW) antenna. The NW laser was bent into a ring with a gap to pump the NV defects in the ND which was assembled in the gap with the diameter of ∼8 μ m. And the fluorescent light of NV defects was enhanced by the NW ring resonator about 8 times. Furthermore, the NW laser pulse was produced by the optical switch and a simple plus-sequences was designed to get the Rabi oscillation signal. Based on the Rabi oscillation, a Ramsey-type sequence was used to detect the magnetic field with the sensitivity of 83 nT √Hz −1 for our 10 μ m-scale spin-based sensor structure. It proves the spin state in our structure allows for coherent spin manipulation for more complex quantum control schemes. And our structure fulfills the fundamental requirements to develop chip-scale spin-based sensors.