Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Saturation Effects and Thermal Balance in Laser-Cooled Solids

Long Cheng

Published Jan 1, 2023• 0 citations
Publisher

Abstract

The role of saturation of background absorption by unintended impurities has been investigated for the first time theoretically and experimentally in the context of laser cooling of crystalline solids and the operation of self-cooled or radiation-balanced lasers. In this thesis it is shown that when saturation of the background takes place at an intensity lower than the saturation intensity of dopant ions responsible for cooling, as in Yb3+:LiYF4, cooling efficiency can be improved by using elevated input intensity. With the same input power, the measured cooling efficiency in 10% Yb3+:LiYF4 crystal was doubled at 1020 nm when the beam radius was reduced by a factor of 10, by partially saturating the background impurity absorption. This is effective not only as a post-growth method of enhancing cooling efficiency but offers a new way of reaching lower temperatures than were previously possible with anti-Stokes fluorescent (ASF) refrigeration. Prior to this work, cooling efficiency was thought to be independent of intensity and crystal purification was considered as the only way to improve the cooling efficiency. It is further demonstrated that background saturation plays a key role in the operation of self-cooled or radiation-balanced lasers. Because radiation-balanced lasers operate under saturated conditions it is essential to include limitations imposed by impurity content of the gain medium. When this is done, quantitative predictions of the required conditions for radiation balance become possible. Laser operation can then be made more efficient and can be extended to new materials which may be relatively impure and uncommon but are well-suited to efficient operation under radiation-balanced conditions by virtue of a special combination of physical characteristics. Radiation-balanced laser operation is achieved in 3% Yb:YAG (1 × 1 × 10 mm3) and is found to result in exceptionally uniform temperature distributions using high resolution thermal imagery. Threshold levels, output power, and input power at the radiation balance point are all shown to be in close agreement with theory. This laser achieved 30.5% laser efficiency (agreed with predictions within 2%), which is the highest efficiency level of any self-cooled laser operated to date. Radiation-balanced lasing is also achieved for the first time in the tungstate crystal 2% Yb3+:KYW (0.9×1.2×10 cm3), despite having very high impurity content as the result of being an uncommon gain medium. The achieved laser efficiency was only 2.2%, as the result of non-optimal optical components, high Yb concentration, high impurity content, crystal polish, excitation wavelength, and output coupling. However, this is the first demonstration of an Yb3+ radiation-balanced laser in the tungstate host. Correction of these deficiencies should enable high quality Gaussian output at the 5 W level with 18% efficiency in existing commercial 1% Yb:KYW samples. Even better performance of this new self-cooled laser could result from improved crystal growth efforts.

DOI
10.7302/7297

Related papers

Temperature dynamics of laser cooling of solids with Yb3+ions

Galina A. Nemova, Raman Kashyap

We consider a theoretical model for laser cooling with anti-Stokes fluorescence of a Yb3+:YAG sample. We have estimated the fluorescence power density removed from the system with spontaneous emission, the power density radiated with stimulated emission as well as the heat power density generated in the system by non-radiative decays from the impurities in the host material. We have investigated the influence of each of these power densities on the cooling process in Yb3+:YAG system. It has been shown how the temperature dependences of the different parameters of the system as well as the concentration of the impurities in the host influence the final temperature of the cooled sample.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 19, 2014•1 citation

Laser cooling under ambient conditions in Yb3+:KYW

Laura B. Andre, Long Cheng, Alexander J. Salkeld +4 more

We report the first observation of laser cooling in 1%Yb3+:KYW and discuss factors that limit the cooling efficiency. Cooling by 10 K from room temperature at atmospheric pressure was achieved in this crystal at a wavelength of 1025 nm using 8 W from a seeded fiber amplifier. The temperature of the sample was measured using a calibrated differential luminescence thermometry method and was verified with a thermal camera. Infrared imagery and 3-D modeling were used to analyze the impact of thermal conduction, thermal convection, black-body radiation, and background impurities. The simulated results agree with experimental measurements confirming that the chief limitation of laser cooling at room temperature and atmospheric pressure is thermal conduction from sample supports. Best results were obtained for samples mounted on silica aerogel. Theoretical improvement of cooling efficiency in vacuum by exploiting impurity absorption saturation is also discussed.

Photonic Heat Engines: Science and Applications•Mar 1, 2019•0 citations

Laser cooling in Yb^3+:YAG

Galina A. Nemova, Raman Kashyap

We develop a detailed theoretical model for laser cooling in Yb3+:YAG. The expressions for the fluorescence power density removed from the system with spontaneous emission, the power density radiated with stimulated emission, as well as the heat power density generated in the system by nonradiative decays on the impurities of the host material have been calculated. The influence of each of these power densities on the cooling process has been analyzed. We show, for the first time to our knowledge, how the temperature dependences of the different parameters of the system as well as the concentration of the impurities in the host influence the final temperature of the cooled sample.

Journal of the Optical Society of America B•Jan 22, 2014•22 citations

Enhanced laser cooling of rare-earth-ion-doped nanocrystalline powders

Xiulin Ruan, Massoud Kaviany

The enhanced laser cooling performance of rare-earth-ion-doped nanocrystalline powders is predicted, compared to the bulk material, using ${\mathrm{Yb}}^{3+}:{\mathrm{Y}}_{2}{\mathrm{O}}_{3}$ as the model material. This is achieved by enhancing the off-resonance, phonon-assisted absorption, which is proportional to the three factors considered in this paper: the dopant concentration, the pumping field energy, and the excitation coefficient. Using the energy transfer theory for concentration quenching, the optimum concentration corresponding to the maximum cooling power is found to be considerably larger than the currently used value, suggesting noticeable enhancement effects for laser cooling. The pumping field energy is enhanced in random nanopowders compared with bulk crystals under the same irradiation, due to the multiple scattering of photons. Photons are thus localized in the medium and do not propagate through, increasing the photon absorption of the pumping beam (and it is shown that the reabsorption of the fluorescence is negligible). Using molecular dynamics simulations, the phonon density of states (DOS) of the nanopowder is calculated, and found to have broadened modes, and extended small tails at low and high frequencies. The second-order electronic transition rate for the anti-Stokes luminescence is calculated using the Fermi golden rule, which includes the influence of this phonon DOS, and is shown to have enhancement effects on the laser cooling efficiency using nanopowders. It is finally concluded that these three enhancement mechanisms are essentially to increase the population of the three participating carriers (electron, photon, and phonon) in the interacting volume, and this also points out directions for enhancing laser cooling performance in bulk materials.

Physical Review B•Apr 21, 2006•73 citations

Enhanced cooling of Yb:YLF using astigmatic Herriott cell (Conference Presentation)

Aram Gragossian, Junwei Meng, Mohammadreza Ghasemkhani +3 more

Optical refrigeration of solids requires crystals with exceptional qualities. Crystals with external quantum efficiencies (EQE) larger than 99% and background absorptions of 4×10-4cm-1 have been cooled to cryogenic temperatures using non resonant cavities. Estimating the cooling efficiency requires accurate measurements of the above mentioned quantities. Here we discuss measurements of EQE and background absorption for two high quality Yb:YLF samples. For any given sample, to reach minimum achievable temperatures heat generated by fluorescence must be removed from the surrounding clamshell and more importantly, absorption of the laser light must be maximized. Since the absorption coefficient drops at lower temperatures the only option is to confine laser light in a cavity until almost 100% of the light is absorbed. This can be achieved by placing the crystal between a cylindrical and spherical mirror to form an astigmatic Herriott cell. In this geometry light enters through a hole in the middle of the spherical mirror and if the entrance angle is correct, it can make as many round trips as required to absorb all the light. At 120 K 60 passes and 150 passes at 100K ensures more than 95% absorption of the laser light. 5 and 10% Yb:YLF crystals placed in such a cell cool to sub 90K temperatures. Non-contact temperature measurements are more challenging for such a geometry. Reabsorption of fluorescence for each pass must be taken into account for accurate temperature measurements by differential luminescence thermometry (DLT). Alternatively, we used part of the spectrum that is not affected by reabsorption.

•Apr 20, 2017•2 citations

Adaptive four-level modeling of laser cooling of solids

Weiliang Jin, Cheng Guo, Meir Orenstein +1 more

Laser cooling of rare-earth doped solids has been demonstrated across a wide range of material platforms, inspiring the development of simple phenomenological models such as the four-level model to elucidate the universal properties of laser cooling under various operating conditions. However, these models usually require the input of full absorption spectra that must be provided experimentally or by additional complicated atomic modeling. In this Letter, we propose that a four-level model, when extended to admit effective energy levels adaptive to the pumping photon energy, can accurately predict the cooling efficiency as a function of temperature and pumping frequency using only few inputs such as the absorption coefficient measured at a single frequency and temperature. Our model exploits the quasi-equilibrium properties of the excitation of rare-earth ions for the determination of the effective four energy levels. The model is validated against published experimental results for a span of materials including ytterbium/thulium-doped glass and crystals. With the verified model, we derive explicit expressions for the optimal frequency and the operating bandwidth of pumping lasers. Our model significantly simplifies the modeling process of laser cooling and is expected to stimulate further development of optical refrigeration.

arXiv:2109.02702•Applied Physics Letters•Nov 1, 2021•8 citations
The role of saturation of background absorption by unintended impurities has been investigated for the first time theoretically and experimentally in the context of laser cooling of crystalline solids and the operation of self-cooled or radiation-balanced lasers. In this thesis it is shown that when saturation of the background takes place at an intensity lower than the saturation intensity of dopant ions responsible for cooling, as in Yb3+:LiYF4, cooling efficiency can be improved by using elevated input intensity. With the same input power, the measured cooling efficiency in 10% Yb3+:LiYF4 crystal was doubled at 1020 nm when the beam radius was reduced by a factor of 10, by partially saturating the background impurity absorption. This is effective not only as a post-growth method of enhancing cooling efficiency but offers a new way of reaching lower temperatures than were previously possible with anti-Stokes fluorescent (ASF) refrigeration. Prior to this work, cooling efficiency was thought to be independent of intensity and crystal purification was considered as the only way to improve the cooling efficiency. It is further demonstrated that background saturation plays a key role in the operation of self-cooled or radiation-balanced lasers. Because radiation-balanced lasers operate under saturated conditions it is essential to include limitations imposed by impurity content of the gain medium. When this is done, quantitative predictions of the required conditions for radiation balance become possible. Laser operation can then be made more efficient and can be extended to new materials which may be relatively impure and uncommon but are well-suited to efficient operation under radiation-balanced conditions by virtue of a special combination of physical characteristics. Radiation-balanced laser operation is achieved in 3% Yb:YAG (1 × 1 × 10 mm3) and is found to result in exceptionally uniform temperature distributions using high resolution thermal imagery. Threshold levels, output power, and input power at the radiation balance point are all shown to be in close agreement with theory. This laser achieved 30.5% laser efficiency (agreed with predictions within 2%), which is the highest efficiency level of any self-cooled laser operated to date. Radiation-balanced lasing is also achieved for the first time in the tungstate crystal 2% Yb3+:KYW (0.9×1.2×10 cm3), despite having very high impurity content as the result of being an uncommon gain medium. The achieved laser efficiency was only 2.2%, as the result of non-optimal optical components, high Yb concentration, high impurity content, crystal polish, excitation wavelength, and output coupling. However, this is the first demonstration of an Yb3+ radiation-balanced laser in the tungstate host. Correction of these deficiencies should enable high quality Gaussian output at the 5 W level with 18% efficiency in existing commercial 1% Yb:KYW samples. Even better performance of this new self-cooled laser could result from improved crystal growth efforts.
We consider a theoretical model for laser cooling with anti-Stokes fluorescence of a Yb3+:YAG sample. We have estimated the fluorescence power density removed from the system with spontaneous emission, the power density radiated with stimulated emission as well as the heat power density generated in the system by non-radiative decays from the impurities in the host material. We have investigated the influence of each of these power densities on the cooling process in Yb3+:YAG system. It has been shown how the temperature dependences of the different parameters of the system as well as the concentration of the impurities in the host influence the final temperature of the cooled sample.
We report the first observation of laser cooling in 1%Yb3+:KYW and discuss factors that limit the cooling efficiency. Cooling by 10 K from room temperature at atmospheric pressure was achieved in this crystal at a wavelength of 1025 nm using 8 W from a seeded fiber amplifier. The temperature of the sample was measured using a calibrated differential luminescence thermometry method and was verified with a thermal camera. Infrared imagery and 3-D modeling were used to analyze the impact of thermal conduction, thermal convection, black-body radiation, and background impurities. The simulated results agree with experimental measurements confirming that the chief limitation of laser cooling at room temperature and atmospheric pressure is thermal conduction from sample supports. Best results were obtained for samples mounted on silica aerogel. Theoretical improvement of cooling efficiency in vacuum by exploiting impurity absorption saturation is also discussed.
We develop a detailed theoretical model for laser cooling in Yb3+:YAG. The expressions for the fluorescence power density removed from the system with spontaneous emission, the power density radiated with stimulated emission, as well as the heat power density generated in the system by nonradiative decays on the impurities of the host material have been calculated. The influence of each of these power densities on the cooling process has been analyzed. We show, for the first time to our knowledge, how the temperature dependences of the different parameters of the system as well as the concentration of the impurities in the host influence the final temperature of the cooled sample.
The enhanced laser cooling performance of rare-earth-ion-doped nanocrystalline powders is predicted, compared to the bulk material, using Yb3+:Y2O3{\mathrm{Yb}}^{3+}:{\mathrm{Y}}_{2}{\mathrm{O}}_{3}Yb3+:Y2​O3​ as the model material. This is achieved by enhancing the off-resonance, phonon-assisted absorption, which is proportional to the three factors considered in this paper: the dopant concentration, the pumping field energy, and the excitation coefficient. Using the energy transfer theory for concentration quenching, the optimum concentration corresponding to the maximum cooling power is found to be considerably larger than the currently used value, suggesting noticeable enhancement effects for laser cooling. The pumping field energy is enhanced in random nanopowders compared with bulk crystals under the same irradiation, due to the multiple scattering of photons. Photons are thus localized in the medium and do not propagate through, increasing the photon absorption of the pumping beam (and it is shown that the reabsorption of the fluorescence is negligible). Using molecular dynamics simulations, the phonon density of states (DOS) of the nanopowder is calculated, and found to have broadened modes, and extended small tails at low and high frequencies. The second-order electronic transition rate for the anti-Stokes luminescence is calculated using the Fermi golden rule, which includes the influence of this phonon DOS, and is shown to have enhancement effects on the laser cooling efficiency using nanopowders. It is finally concluded that these three enhancement mechanisms are essentially to increase the population of the three participating carriers (electron, photon, and phonon) in the interacting volume, and this also points out directions for enhancing laser cooling performance in bulk materials.
Optical refrigeration of solids requires crystals with exceptional qualities. Crystals with external quantum efficiencies (EQE) larger than 99% and background absorptions of 4×10-4cm-1 have been cooled to cryogenic temperatures using non resonant cavities. Estimating the cooling efficiency requires accurate measurements of the above mentioned quantities. Here we discuss measurements of EQE and background absorption for two high quality Yb:YLF samples. For any given sample, to reach minimum achievable temperatures heat generated by fluorescence must be removed from the surrounding clamshell and more importantly, absorption of the laser light must be maximized. Since the absorption coefficient drops at lower temperatures the only option is to confine laser light in a cavity until almost 100% of the light is absorbed. This can be achieved by placing the crystal between a cylindrical and spherical mirror to form an astigmatic Herriott cell. In this geometry light enters through a hole in the middle of the spherical mirror and if the entrance angle is correct, it can make as many round trips as required to absorb all the light. At 120 K 60 passes and 150 passes at 100K ensures more than 95% absorption of the laser light. 5 and 10% Yb:YLF crystals placed in such a cell cool to sub 90K temperatures. Non-contact temperature measurements are more challenging for such a geometry. Reabsorption of fluorescence for each pass must be taken into account for accurate temperature measurements by differential luminescence thermometry (DLT). Alternatively, we used part of the spectrum that is not affected by reabsorption.
Laser cooling of rare-earth doped solids has been demonstrated across a wide range of material platforms, inspiring the development of simple phenomenological models such as the four-level model to elucidate the universal properties of laser cooling under various operating conditions. However, these models usually require the input of full absorption spectra that must be provided experimentally or by additional complicated atomic modeling. In this Letter, we propose that a four-level model, when extended to admit effective energy levels adaptive to the pumping photon energy, can accurately predict the cooling efficiency as a function of temperature and pumping frequency using only few inputs such as the absorption coefficient measured at a single frequency and temperature. Our model exploits the quasi-equilibrium properties of the excitation of rare-earth ions for the determination of the effective four energy levels. The model is validated against published experimental results for a span of materials including ytterbium/thulium-doped glass and crystals. With the verified model, we derive explicit expressions for the optimal frequency and the operating bandwidth of pumping lasers. Our model significantly simplifies the modeling process of laser cooling and is expected to stimulate further development of optical refrigeration.