Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Qubit generation and photon cooling in a Ramsey interferometer

Pontificia Universidad Católica de Chile. Instituto de Física, Felipe Oyarce

Published Jan 1, 2020• 0 citations
Publisher

Abstract

In this thesis, we propose a realizable experimental scheme to prepare a superposition of the vacuum and one-photon states using a typical cavity QED-setup. This is different from previous schemes, where the superposition state of the field is generated by resonant atom-field interaction and the cavity is initially empty. Here, we consider only dispersive atom-field interaction and the initial state of the cavity field is coherent. Then, we determine the parameters to prepare the desired state via atomic post-selection. We also include the effect of cavity losses and detection imperfections in our analysis against which this preparation of the optical qubit in a real Fabry-Perot superconducting cavity is robust. In addition, we show that this scheme can be used for the preparation of other photon number Fock state superpositions. In short, our task is achieved with high fidelity and a post-selection probability within experimental reach. With the same scheme, we propose to cool the cavity field to its ground state starting from a thermal distribution by a dispersive atom-field coupling followed by an atomic post-selection. We also analyze the effect of the cavity and atomic losses. The proposed experiment can be realized with real parameters with high fidelity.

DOI
10.7764/tesisuc/fis/62920

Related papers

Optical qubit generation via atomic postselection in a Ramsey interferometer

M Orszag, F Oyarce

Abstract We propose a realizable experimental scheme to prepare a superposition of the vacuum and one-photon states using a typical cavity QED-setup. This is different from previous schemes, where the superposition state of the field is generated by resonant atom-field interaction and the cavity is initially empty. Here, we consider only dispersive atom-field interaction and the initial state of the cavity field is coherent. Then, we determine the parameters to prepare the desired state via atomic postselection. We also include the effect of cavity losses and detection imperfections in our analysis, against which this preparation of the optical qubit in a real Fabry–Pérot superconducting cavity is robust. Additionally, we show that this scheme can be used for the preparation of other photon number Fock state superpositions. In summary, our task is achieved with a high fidelity and a postselection probability within experimental reach.

arXiv:1805.01513•Physica Scripta•Aug 21, 2018•1 citation

Photon cooling by dispersive atom-field coupling with atomic postselection

Felipe Oyarce, Miguel Orszag

We propose, in a Ramsey interferometer, to cool the cavity field to its ground state, starting from a thermal distribution by a dispersive atom-field coupling followed by an atomic postselection. We also analyze the effect of the cavity and atomic losses. The proposed experiment can be realized with realistic parameters with high fidelity.

arXiv:1904.03839•Apr 8, 2019•0 citations

Ramsey Interferometry with a Single Photon Field in Cavity QED

S. Osnaghi, Arno Rauschenbeutel, Patrice Bertet +4 more

We present the experimental realisation of a cavity QED atom interferometer based on two consecutive resonant interactions of a circular Rydberg atom with the field mode of a high Q microwave resonator that is initially prepared in the vacuum state. The interferometer scheme is analogous to the Ramsey method with the classical field replaced by the quantum field stored in the cavity mode. We demonstrate the possibility to use this technique to probe, by dispersive interaction, the field stored in a second mode of the resonator.

Kluwer Academic Publishers eBooks•Feb 24, 2006•0 citations

Photon-number-state generation with a single two-level atom in a cavity: a proposal

P. Domokos, M. Brune, J. M. Raimond +2 more

A single two-level atom can be used to prepare an arbitrary photon number state (Fock state) in a high Q cavity . The atom undergoes a controlled succession of interactions with two cavity modes. One of them contains a coherent field. The atom transfers photons one by one from this field to the initially empty second mode. The scheme can be extended to prepare a quantum superposition of the vacuum with a Fock state, a highly non-classical situation. We discuss the feasibility of the experiment with our present Rydberg-atom cavity QED set-up.

The European Physical Journal D•Jan 1, 1998•58 citations

Manipulation of photons in a cavity by dispersive atom-field coupling: Quantum-nondemolition measurements and generation of ‘‘Schrödinger cat’’ states

M. Brune, S. Haroche, J. M. Raimond +2 more

A quantum-nondemolition method to measure the number of photons stored in a high-Q cavity, introduced by Brune et al. [Phys. Rev. Lett. 65, 976 (1990)], is described in detail. It is based on the detection of the dispersive phase shift produced by the field on the wave function of nonresonant atoms crossing the cavity. This shift can be measured by atomic interferometry, using the Ramsey separated-oscillatory-field method. The information acquired by detecting a sequence of atoms modifies the field step by step, until it eventually collapses into a Fock state. At the same time, the field phase undergoes a diffusive process as a result of the back action of the measurement on the photon-number conjugate variable. Once a Fock state has been generated, its evolution under weak perturbation can be continuously monitored, revealing quantum jumps between various photon numbers. When applied to an initial coherent field, the intermediate steps of the measuring sequence produce quantum superpositions of classical fields, known as ``Schr\"odinger cat states.'' Ways to prepare and detect these states in a cavity subjected to a weak relaxation process are discussed. The effects analyzed in this article could realistically be observed by using circular Rydberg atoms and very high-Q superconducting microwave cavities. The possibility of photon ``manipulation'' through nonresonant atom-field interactions opens a domain in cavity QED studies.

Physical Review A•Apr 1, 1992•743 citations

Fock-state preparation based on amplitude amplification in cavity QED

Sharoon Austin, Zhi-Yuan Wei, Kartik Srinivasan +1 more

In this work, we develop a coherent control technique for cavity QED based on amplitude amplification. We consider two physical platforms. In the first setting, we study a three-level quantum emitter coupled to a single mode of an optical cavity and introduce a protocol for producing traveling single photons based on oblivious amplitude amplification. As the key ingredient of our protocol, we propose an extension of oblivious amplitude amplification which uses reflection unitaries solely on the signal qubit, along with $U$ and $U^\dagger$, where the unitary $U$ prepares the initial state. Our approach improves the scaling of the single-photon-generation protocol length from $N\sim 1/p$ to $N\sim 1/\sqrt{p}$, with $p$ denoting the success probability of obtaining a short single photon from a single application of the weak control pulse. Furthermore, our protocol also reduces the error from intrinsic cavity loss compared to protocols using a single strong control pulse in various experimentally relevant regimes, suggesting the application of our methods for error reduction. In the second setting, we consider a superconducting qubit coupled to a single bosonic mode of a microwave cavity in a circuit QED architecture in the dispersive regime for preparing Fock states. Using fixed-point amplitude amplification, we obtain a protocol for preparing Fock states whose length scales as $O(n^{1/4})$, where $n$ is the number of photons. Additionally, as an application of our methods for state preparation, we describe a protocol for preparing NOON states.

quant-pharXiv:2607.14239•Jul 17, 2026•3 citations
In this thesis, we propose a realizable experimental scheme to prepare a superposition of the vacuum and one-photon states using a typical cavity QED-setup. This is different from previous schemes, where the superposition state of the field is generated by resonant atom-field interaction and the cavity is initially empty. Here, we consider only dispersive atom-field interaction and the initial state of the cavity field is coherent. Then, we determine the parameters to prepare the desired state via atomic post-selection. We also include the effect of cavity losses and detection imperfections in our analysis against which this preparation of the optical qubit in a real Fabry-Perot superconducting cavity is robust. In addition, we show that this scheme can be used for the preparation of other photon number Fock state superpositions. In short, our task is achieved with high fidelity and a post-selection probability within experimental reach. With the same scheme, we propose to cool the cavity field to its ground state starting from a thermal distribution by a dispersive atom-field coupling followed by an atomic post-selection. We also analyze the effect of the cavity and atomic losses. The proposed experiment can be realized with real parameters with high fidelity.
Abstract We propose a realizable experimental scheme to prepare a superposition of the vacuum and one-photon states using a typical cavity QED-setup. This is different from previous schemes, where the superposition state of the field is generated by resonant atom-field interaction and the cavity is initially empty. Here, we consider only dispersive atom-field interaction and the initial state of the cavity field is coherent. Then, we determine the parameters to prepare the desired state via atomic postselection. We also include the effect of cavity losses and detection imperfections in our analysis, against which this preparation of the optical qubit in a real Fabry–Pérot superconducting cavity is robust. Additionally, we show that this scheme can be used for the preparation of other photon number Fock state superpositions. In summary, our task is achieved with a high fidelity and a postselection probability within experimental reach.
We present the experimental realisation of a cavity QED atom interferometer based on two consecutive resonant interactions of a circular Rydberg atom with the field mode of a high Q microwave resonator that is initially prepared in the vacuum state. The interferometer scheme is analogous to the Ramsey method with the classical field replaced by the quantum field stored in the cavity mode. We demonstrate the possibility to use this technique to probe, by dispersive interaction, the field stored in a second mode of the resonator.
A single two-level atom can be used to prepare an arbitrary photon number state (Fock state) in a high Q cavity . The atom undergoes a controlled succession of interactions with two cavity modes. One of them contains a coherent field. The atom transfers photons one by one from this field to the initially empty second mode. The scheme can be extended to prepare a quantum superposition of the vacuum with a Fock state, a highly non-classical situation. We discuss the feasibility of the experiment with our present Rydberg-atom cavity QED set-up.
A quantum-nondemolition method to measure the number of photons stored in a high-Q cavity, introduced by Brune et al. [Phys. Rev. Lett. 65, 976 (1990)], is described in detail. It is based on the detection of the dispersive phase shift produced by the field on the wave function of nonresonant atoms crossing the cavity. This shift can be measured by atomic interferometry, using the Ramsey separated-oscillatory-field method. The information acquired by detecting a sequence of atoms modifies the field step by step, until it eventually collapses into a Fock state. At the same time, the field phase undergoes a diffusive process as a result of the back action of the measurement on the photon-number conjugate variable. Once a Fock state has been generated, its evolution under weak perturbation can be continuously monitored, revealing quantum jumps between various photon numbers. When applied to an initial coherent field, the intermediate steps of the measuring sequence produce quantum superpositions of classical fields, known as ``Schr\"odinger cat states.'' Ways to prepare and detect these states in a cavity subjected to a weak relaxation process are discussed. The effects analyzed in this article could realistically be observed by using circular Rydberg atoms and very high-Q superconducting microwave cavities. The possibility of photon ``manipulation'' through nonresonant atom-field interactions opens a domain in cavity QED studies.
In this work, we develop a coherent control technique for cavity QED based on amplitude amplification. We consider two physical platforms. In the first setting, we study a three-level quantum emitter coupled to a single mode of an optical cavity and introduce a protocol for producing traveling single photons based on oblivious amplitude amplification. As the key ingredient of our protocol, we propose an extension of oblivious amplitude amplification which uses reflection unitaries solely on the signal qubit, along with UUU and U†U^\daggerU†, where the unitary UUU prepares the initial state. Our approach improves the scaling of the single-photon-generation protocol length from N∼1/pN\sim 1/pN∼1/p to N∼1/pN\sim 1/\sqrt{p}N∼1/p​, with ppp denoting the success probability of obtaining a short single photon from a single application of the weak control pulse. Furthermore, our protocol also reduces the error from intrinsic cavity loss compared to protocols using a single strong control pulse in various experimentally relevant regimes, suggesting the application of our methods for error reduction. In the second setting, we consider a superconducting qubit coupled to a single bosonic mode of a microwave cavity in a circuit QED architecture in the dispersive regime for preparing Fock states. Using fixed-point amplitude amplification, we obtain a protocol for preparing Fock states whose length scales as O(n1/4)O(n^{1/4})O(n1/4), where nnn is the number of photons. Additionally, as an application of our methods for state preparation, we describe a protocol for preparing NOON states.