Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Phase-insensitive amplifier gain estimation at Cramér-Rao bound for two-mode squeezed state of light

Hailong Wang, Zehua Chen, Zhongxing Fu, Yunpeng Shi, Xiong Zhang, Chunliu Zhao, Shangzhong Jin, Jietai Jing

Published Mar 28, 2023• 3 citations
Publisher

Abstract

Phase-insensitive amplifiers (PIAs), as a class of important quantum devices, have found significant applications in the subtle manipulation of multiple quantum correlation and multipartite quantum entanglement. Gain is a very important parameter for quantifying the performance of a PIA. Its absolute value can be defined as the ratio of the output light beam power to the input light beam power, while its estimation precision has not been extensively investigated yet. Therefore, in this work, we theoretically study the estimation precision from the vacuum two-mode squeezed state (TMSS), the estimation precision of the coherent state, and the bright TMSS scenario, which has the following two advantages: it has more probe photons than the vacuum TMSS and higher estimation precision than the coherent state. The advantage in terms of estimation precision of the bright TMSS compared with the coherent state is researched. We first simulate the effect of noise from another PIA with gain M on the estimation precision of the bright TMSS, and we find that a scheme in which the PIA is placed in the auxiliary light beam path is more robust than two other schemes. Then, a fictitious beam splitter with transmission T is used to simulate the noise effects of propagation loss and imperfect detection, and the results show that a scheme in which the fictitious beam splitter is placed before the original PIA in the probe light beam path is the most robust. Finally, optimal intensity difference measurement is confirmed to be an accessible experimental technique to saturate estimation precision of the bright TMSS. Therefore, our present study opens a new avenue for quantum metrology based on PIAs.

DOI
10.1364/oe.483770

Related papers

Quantum metrology of absorption and gain parameters using two-mode bright squeezed light

Mrunal Kamble, Jiaxuan Wang, G. S. Agarwal

Absorption and gain processes are fundamental to any light-matter interaction and a precise measurement of these parameters is important for various scientific and technological applications. Quantum probes, specifically the squeezed states, have proved very successful, particularly in the applications that deal with phase shift and force measurements. In this paper, we focus on improving the sensitivity of the estimation of the photon-loss coefficient of a weakly absorbing medium as well as the estimation of the gain parameter using a two-mode bright squeezed state. The generation of this state combines the advantage of a coherent beam for its large photon number with the quantum properties of the two-mode squeezing operation in an optical parametric amplifier. We present two measurement schemes: balanced photodetection and time-reversed metrology, both utilizing two-mode bright squeezed light. The maximum quantum advantage we can achieve using two-mode bright squeezed light is 3.7 times for the absorption parameter $\ensuremath{\alpha}=0.05$ and 8.4 times for $\ensuremath{\alpha}=0.01$ as compared to using only the coherent state. Similarly, the maximum quantum advantage for the estimation of optical gain is found around 2.95 times for the gain coefficient $G=1.05$ and around 6.35 times for $G=1.01$. We discuss the significance of using one measurement scheme over the other under different squeezing conditions. We compare our results with the Cram\'er-Rao bound for a two-mode bright squeezed state to assess the quality of the proposed methodologies.

arXiv:2404.00871•Physical Review A•May 16, 2024•17 citations

Optical properties of a quantum-noise-limited phase-sensitive amplifier

Tian Li

This dissertation is a summary of investigations on the optical properties of a quantum-noise-limited phase-sensitive amplifier (PSA). The PSA is implemented using four-wave mixing in hot Rb 85 vapor based on a double-Lambda atomic scheme. We experimentally demonstrate the ability of a PSA to pre-amplify quantum correlations in twin light beams produced by a phase-insensitive amplifier (PIA) before degradation due to loss and detector inefficiency. By including a PSA before loss, one is able to preserve the correlations as well as the two-mode squeezing level. We compare the results to simulations employing a simple quantum-mechanical model and find a good agreement. We have demonstrated that the cross-correlation between the two modes of a bipartite entangled state can be advanced by propagation through a PIA acting as a fast-light medium. The extra noise added by the PIA has been speculated to be the mechanism that limits the advance of entanglement, preventing the mutual information from traveling superluminally. As an extension of this phase-insensitive, gain-assisted, anomalous dispersion investigation, we explore the advance and delay of information transmitted through the PSA. We start with a two-mode squeezed state created by the PIA and measure the mutual information shared by the correlated quadratures. We then pass one of these two modes through a PSA and investigate the shift of the mutual information as a function of the PSA phase. In the case of a PSA, it is well known that no extra noise will be added to the quadrature with the correct input phase (e.g., the quadrature with the maximal amplification or the maximal deamplification). We find that there is no dispersion-like behavior at these two phases, however, the peak of mutual information could either be delayed or advanced at any other phase. We also observe an almost identical behavior when we input an amplitude modulated signal to the PSA. We are able to explain the physics of this ``fast-and-slow-light'' type of behavior utilizing a model assuming imbalanced gain on the positive and negative side bands. We obtain a good agreement between the experimental results and the theoretical simulations.

•Jan 1, 2017•0 citations

Towards the ultimate limit in transmission estimation

Alberto M. Marino

The minimum possible uncertainty when estimating a parameter, in this case transmission, is bounded by the quantum Cramér-Rao bound (QCRB). This bound is independent of the measurement technique and as result can be used to quantify how close a measurement is to the optimal one for a given system and probing state, as an optimal measurement saturates the QCRB. The ability to perform transmission measurements through an optical system at the QCRB can lead to enhancements in the calibration of optimal states for interferometers, the characterization of high efficiency photodetectors, or the sensitivity of sensing devices based on transmission, such as plasmonic sensors or spectroscopy. We show theoretically that the ultimate sensitivity limit per photon in the estimation of transmission, achievable with Fock states or vacuum two-mode squeezed states (vTMSS), can be approached through the use of bright quantum states of light, such as bright single-mode squeezed states (bSMSS) or bright two-mode squeezed states (bTMSS). The use of bright quantum states has the advantage that they can be generated with a significantly larger number of photons, which leads to an absolute sensitivity that can be many orders of magnitude larger than the one achieved with Fock states or vTMSS. We identify a measurement strategy that saturates the QCRB for these bright quantum states and shown experimentally that transmission estimation at the QCRB can be achieved with bTMSS through optimized intensity difference measurements.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•0 citations

Transmission estimation at the quantum Cramér-Rao bound with macroscopic quantum light

Timothy S. Woodworth, Carla Hermann-Avigliano, Kam Wai Clifford Chan +1 more

The field of quantum metrology seeks to apply quantum techniques and/or resources to classical sensing approaches with the goal of enhancing the precision in the estimation of a parameter beyond what can be achieved with classical resources. Theoretically, the fundamental minimum uncertainty in the estimation of a parameter for a given probing state is bounded by the quantum Cramér-Rao bound. From a practical perspective, it is necessary to find physical measurements that can saturate this fundamental limit and to show experimentally that it is possible to perform measurements with the required precision to do so. Here we perform experiments that saturate the quantum Cramér-Rao bound for transmission estimation over a wide range of transmissions when probing the system under study with a continuous wave bright two-mode squeezed state. To properly take into account the imperfections in the generation of the quantum state, we extend our previous theoretical results to incorporate the measured properties of the generated quantum state. For our largest transmission level of 84%, we show a 62% reduction over the optimal classical protocol in the variance in transmission estimation when probing with a bright two-mode squeezed state with -8 dB of intensity-difference squeezing. Given that transmission estimation is an integral part of many sensing protocols, such as plasmonic sensing, spectroscopy, calibration of the quantum efficiency of detectors, etc., the results presented promise to have a significant impact on a number of applications in various fields of research.

arXiv:2201.08902•EPJ Quantum Technology•Dec 1, 2022•12 citations

Enhanced phase estimation with coherently boosted two-mode squeezed beams and its application to optical gyroscopes

Xiao-Qi Xiao, Elisha S. Matekole, Jiankang Zhao +3 more

Quantum techniques, developed in recent decades, provide new approaches to achieving high-precision measurements beyond the classical bounds. In this paper, we theoretically demonstrate a metrology method for improving the sensitivity of the interferometric optical gyroscope, robust against the loss, by using coherent-light stimulated two-mode squeezed beams as the light source. The detection protocol is based on a simple intensity measurement, and the quantum noise is far below the shot-noise limit. The enhancement factors for different coherent light fields are analyzed in detail. Additionally, the influence of loss during the propagation in the optical path is studied, and the conditions for achieving sub-shot-noise measurement sensitivity are obtained. We also find that the phase sensitivity of the proposed gyroscope scheme becomes closer to the quantum Cramér-Rao bound with increasing of the photon number of the coherent beams.

quant-pharXiv:2607.05732•Physical Review A•Jul 8, 2026•10 citations

Optimal Gain Sensing of Quantum-Limited Phase-Insensitive Amplifiers

Ranjith Nair, Guo Yao Tham, Mile Gu

Phase-insensitive optical amplifiers uniformly amplify each quadrature of an input field and are of both fundamental and technological importance. We find the quantum limit on the precision of estimating the gain of a quantum-limited phase-insensitive amplifier using a multimode probe that may also be entangled with an ancilla system. In stark contrast to the sensing of loss parameters, the average photon number N and number of input modes M of the probe are found to be equivalent and interchangeable resources for optimal gain sensing. All pure-state probes whose reduced state on the input modes to the amplifier is diagonal in the multimode number basis are proven to be quantum optimal under the same gain-independent measurement. We compare the best precision achievable using classical probes to the performance of an explicit photon-counting-based estimator on quantum probes and show that an advantage exists even for single-photon probes and inefficient photodetection. A closed-form expression for the energy-constrained Bures distance between two product amplifier channels is also derived.

arXiv:2112.04328•Physical Review Letters•May 6, 2022•9 citations
Phase-insensitive amplifiers (PIAs), as a class of important quantum devices, have found significant applications in the subtle manipulation of multiple quantum correlation and multipartite quantum entanglement. Gain is a very important parameter for quantifying the performance of a PIA. Its absolute value can be defined as the ratio of the output light beam power to the input light beam power, while its estimation precision has not been extensively investigated yet. Therefore, in this work, we theoretically study the estimation precision from the vacuum two-mode squeezed state (TMSS), the estimation precision of the coherent state, and the bright TMSS scenario, which has the following two advantages: it has more probe photons than the vacuum TMSS and higher estimation precision than the coherent state. The advantage in terms of estimation precision of the bright TMSS compared with the coherent state is researched. We first simulate the effect of noise from another PIA with gain M on the estimation precision of the bright TMSS, and we find that a scheme in which the PIA is placed in the auxiliary light beam path is more robust than two other schemes. Then, a fictitious beam splitter with transmission T is used to simulate the noise effects of propagation loss and imperfect detection, and the results show that a scheme in which the fictitious beam splitter is placed before the original PIA in the probe light beam path is the most robust. Finally, optimal intensity difference measurement is confirmed to be an accessible experimental technique to saturate estimation precision of the bright TMSS. Therefore, our present study opens a new avenue for quantum metrology based on PIAs.
Absorption and gain processes are fundamental to any light-matter interaction and a precise measurement of these parameters is important for various scientific and technological applications. Quantum probes, specifically the squeezed states, have proved very successful, particularly in the applications that deal with phase shift and force measurements. In this paper, we focus on improving the sensitivity of the estimation of the photon-loss coefficient of a weakly absorbing medium as well as the estimation of the gain parameter using a two-mode bright squeezed state. The generation of this state combines the advantage of a coherent beam for its large photon number with the quantum properties of the two-mode squeezing operation in an optical parametric amplifier. We present two measurement schemes: balanced photodetection and time-reversed metrology, both utilizing two-mode bright squeezed light. The maximum quantum advantage we can achieve using two-mode bright squeezed light is 3.7 times for the absorption parameter $\ensuremath{\alpha}=0.05$ and 8.4 times for $\ensuremath{\alpha}=0.01$ as compared to using only the coherent state. Similarly, the maximum quantum advantage for the estimation of optical gain is found around 2.95 times for the gain coefficient G=1.05G=1.05G=1.05 and around 6.35 times for G=1.01G=1.01G=1.01. We discuss the significance of using one measurement scheme over the other under different squeezing conditions. We compare our results with the Cram\'er-Rao bound for a two-mode bright squeezed state to assess the quality of the proposed methodologies.
This dissertation is a summary of investigations on the optical properties of a quantum-noise-limited phase-sensitive amplifier (PSA). The PSA is implemented using four-wave mixing in hot Rb 85 vapor based on a double-Lambda atomic scheme. We experimentally demonstrate the ability of a PSA to pre-amplify quantum correlations in twin light beams produced by a phase-insensitive amplifier (PIA) before degradation due to loss and detector inefficiency. By including a PSA before loss, one is able to preserve the correlations as well as the two-mode squeezing level. We compare the results to simulations employing a simple quantum-mechanical model and find a good agreement. We have demonstrated that the cross-correlation between the two modes of a bipartite entangled state can be advanced by propagation through a PIA acting as a fast-light medium. The extra noise added by the PIA has been speculated to be the mechanism that limits the advance of entanglement, preventing the mutual information from traveling superluminally. As an extension of this phase-insensitive, gain-assisted, anomalous dispersion investigation, we explore the advance and delay of information transmitted through the PSA. We start with a two-mode squeezed state created by the PIA and measure the mutual information shared by the correlated quadratures. We then pass one of these two modes through a PSA and investigate the shift of the mutual information as a function of the PSA phase. In the case of a PSA, it is well known that no extra noise will be added to the quadrature with the correct input phase (e.g., the quadrature with the maximal amplification or the maximal deamplification). We find that there is no dispersion-like behavior at these two phases, however, the peak of mutual information could either be delayed or advanced at any other phase. We also observe an almost identical behavior when we input an amplitude modulated signal to the PSA. We are able to explain the physics of this ``fast-and-slow-light'' type of behavior utilizing a model assuming imbalanced gain on the positive and negative side bands. We obtain a good agreement between the experimental results and the theoretical simulations.
The minimum possible uncertainty when estimating a parameter, in this case transmission, is bounded by the quantum Cramér-Rao bound (QCRB). This bound is independent of the measurement technique and as result can be used to quantify how close a measurement is to the optimal one for a given system and probing state, as an optimal measurement saturates the QCRB. The ability to perform transmission measurements through an optical system at the QCRB can lead to enhancements in the calibration of optimal states for interferometers, the characterization of high efficiency photodetectors, or the sensitivity of sensing devices based on transmission, such as plasmonic sensors or spectroscopy. We show theoretically that the ultimate sensitivity limit per photon in the estimation of transmission, achievable with Fock states or vacuum two-mode squeezed states (vTMSS), can be approached through the use of bright quantum states of light, such as bright single-mode squeezed states (bSMSS) or bright two-mode squeezed states (bTMSS). The use of bright quantum states has the advantage that they can be generated with a significantly larger number of photons, which leads to an absolute sensitivity that can be many orders of magnitude larger than the one achieved with Fock states or vTMSS. We identify a measurement strategy that saturates the QCRB for these bright quantum states and shown experimentally that transmission estimation at the QCRB can be achieved with bTMSS through optimized intensity difference measurements.
The field of quantum metrology seeks to apply quantum techniques and/or resources to classical sensing approaches with the goal of enhancing the precision in the estimation of a parameter beyond what can be achieved with classical resources. Theoretically, the fundamental minimum uncertainty in the estimation of a parameter for a given probing state is bounded by the quantum Cramér-Rao bound. From a practical perspective, it is necessary to find physical measurements that can saturate this fundamental limit and to show experimentally that it is possible to perform measurements with the required precision to do so. Here we perform experiments that saturate the quantum Cramér-Rao bound for transmission estimation over a wide range of transmissions when probing the system under study with a continuous wave bright two-mode squeezed state. To properly take into account the imperfections in the generation of the quantum state, we extend our previous theoretical results to incorporate the measured properties of the generated quantum state. For our largest transmission level of 84%, we show a 62% reduction over the optimal classical protocol in the variance in transmission estimation when probing with a bright two-mode squeezed state with -8 dB of intensity-difference squeezing. Given that transmission estimation is an integral part of many sensing protocols, such as plasmonic sensing, spectroscopy, calibration of the quantum efficiency of detectors, etc., the results presented promise to have a significant impact on a number of applications in various fields of research.
Quantum techniques, developed in recent decades, provide new approaches to achieving high-precision measurements beyond the classical bounds. In this paper, we theoretically demonstrate a metrology method for improving the sensitivity of the interferometric optical gyroscope, robust against the loss, by using coherent-light stimulated two-mode squeezed beams as the light source. The detection protocol is based on a simple intensity measurement, and the quantum noise is far below the shot-noise limit. The enhancement factors for different coherent light fields are analyzed in detail. Additionally, the influence of loss during the propagation in the optical path is studied, and the conditions for achieving sub-shot-noise measurement sensitivity are obtained. We also find that the phase sensitivity of the proposed gyroscope scheme becomes closer to the quantum Cramér-Rao bound with increasing of the photon number of the coherent beams.
Phase-insensitive optical amplifiers uniformly amplify each quadrature of an input field and are of both fundamental and technological importance. We find the quantum limit on the precision of estimating the gain of a quantum-limited phase-insensitive amplifier using a multimode probe that may also be entangled with an ancilla system. In stark contrast to the sensing of loss parameters, the average photon number N and number of input modes M of the probe are found to be equivalent and interchangeable resources for optimal gain sensing. All pure-state probes whose reduced state on the input modes to the amplifier is diagonal in the multimode number basis are proven to be quantum optimal under the same gain-independent measurement. We compare the best precision achievable using classical probes to the performance of an explicit photon-counting-based estimator on quantum probes and show that an advantage exists even for single-photon probes and inefficient photodetection. A closed-form expression for the energy-constrained Bures distance between two product amplifier channels is also derived.