Post-quantum (PQ) cryptographic algorithms are currently being developed to be able to resist attacks by quantum computers. The practical use of these algorithms for securing networks will depend on their computational and communication efficiency. In particular, this is critical for the security of wireless communications within the context of consumer IoT devices that may have limited computational power and depend on a constrained wireless bandwidth. To this end, there is a need to evaluate the performance of widely used application layer security standards such as transport layer security (TLS) to understand the use of the existing PQ algorithms that are being evaluated by NIST as a replacement to the current cryptographic algorithms. This paper focuses on two widely used IoT standards Bluetooth Low Energy (BLE) and WiFi to find out the optimal performing PQ algorithm for their security when used in end-to-end connections over the Internet. By implementing the capability for IP over BLE and all options of TLS connection establishment, we developed a client-server IoT testbed to measure the efficiency of PQ key encapsulation mechanisms (KEMs) and PQ digital signature algorithms. The test results showed that Kyber512 is the ideal KEM while Falcon-512 and Dilithium2 are the best signatures for BLE and WiFi devices. Based on this outcome, we developed a mechanism for IoT devices with multiple communication interfaces, that dynamically chooses a PQ KEM algorithm based on the MAC layer protocol being used at the time.
Post-quantum (PQ) cryptographic algorithms are currently being developed to be able to resist attacks by quantum computers. The practical use of these algorithms for securing networks will depend on their computational and communication efficiency. In particular, this is critical for the security of wireless communications within the context of consumer IoT devices that may have limited computational power and depend on a constrained wireless bandwidth. To this end, there is a need to evaluate the performance of widely used application layer security standards such as transport layer security (TLS) to understand the use of the existing PQ algorithms that are being evaluated by NIST as a replacement to the current cryptographic algorithms. This paper focuses on two widely used IoT standards Bluetooth Low Energy (BLE) and WiFi to find out the optimal performing PQ algorithm for their security when used in end-to-end connections over the Internet. By implementing the capability for IP over BLE and all options of TLS connection establishment, we developed a client-server IoT testbed to measure the efficiency of PQ key encapsulation mechanisms (KEMs) and PQ digital signature algorithms. The test results showed that Kyber512 is the ideal KEM while Falcon-512 and Dilithium2 are the best signatures for BLE and WiFi devices. Based on this outcome, we developed a mechanism for IoT devices with multiple communication interfaces, that dynamically chooses a PQ KEM algorithm based on the MAC layer protocol being used at the time.
Scientists estimate large-scale quantum computers will be publicly available within few decades. This will have a detrimental e ect on the security of our digital world, especially security of applications that depend on public-key cryptography. An e ort is going on to develop quantum resistant cryptographic protocols in anticipation of the arrival of quantum computers. As part of this process, it is important to deploy such quantum resistant cryptographic protocols in many di erent platforms, especially resource constrained devices. In this project we aim to provide an evaluation of the performance of post-quantum Key Encapsulation Mechanisms (KEM) and digital signatures integrated into Transport Layer Security (TLS) protocol and deployed in a resource constrained device. Speci cally, we will integrate post-quantum Saber, Kyber and Newhope KEM schemes together with Dilithium digital signature into the embedded TLS open source library, mbedtls. To perform this, the TLS handshake approach of the mbedtls library as well as certi cates and their parsing have been modi ed to be able to handle post-quantum algorithms. The performance of such implementation will be measured with the code deployment into Raspberry Pi 2 Model B, an embedded platform with an ARM Cortex-A7 processor. In our experiments, we found how the integrated post-quantum schemes have algorithm and handshake runtimes from one and up to two orders of magnitude faster than other classical cryptography elliptic curve KEM and signature schemes.
Post-quantum cryptographic (PQC) algorithms are being developed to guard against quantum-computing attacks, but their behavior in constrained Internet of Things (IoT) environments remains an important topic of discussion. In this work, we study the impact of deploying PQC protocols in IoT networks using the Open Quantum Safe (liboqs) framework. In particular, key encapsulation and digital signature schemes are evaluated in terms of their computational performance, communication costs, and energy consumption. Our results indicate that although PQC operations can be completed in microseconds using general-purpose processors, substantially larger key and ciphertext sizes introduce significant communication overhead. When mapped to common IoT protocols such as Bluetooth Low Energy (BLE), IEEE 802.15.4 (Zigbee), and LoRa, these larger payloads must be divided into multiple packets. In low-payload LoRa networks, for example, ML-KEM handshakes can require up to 62 packets. This level of fragmentation increases latency and energy consumption, thus potentially affecting reliability. Furthermore, when packet delivery probabilities approaching 99% are achieved, handshake success rates can drop to values approaching 50%. These results suggest that communication metrics, rather than computational performance, pose key challenges to PQC deployment in constrained IoT settings.
Recent progress in quantum computers severely endangers the security of widely used public-key cryptosystems and of all communication that relies on it. Thus, the US NIST is currently exploring new post-quantum cryptographic algorithms that are robust against quantum computers. Security is seen as one of the most critical issues of low-power IoT devices-even with pre-quantum public-key cryptography-since IoT devices have tight energy constraints, limited computational power and strict memory limitations. In this paper, we present, to the best of our knowledge, the first in-depth investigation of the application of potential post-quantum key encapsulation mechanisms (KEMs) and digital signature algorithms (DSAs) proposed in the related US NIST process to a state-of-the-art, TLS-based, low-power IoT infrastructure. We implemented these new KEMs and DSAs in such a representative infrastructure and measured their impact on energy consumption, latency and memory requirements during TLS handshakes on an IoT edge device. Based on our investigations, we gained the following new insights. First, we show that the main contributor to high TLS handshake latency is the higher bandwidth requirement of post-quantum primitives rather than the cryptographic computation itself. Second, we demonstrate that a smart combination of multiple DSAs yields the most energy-, latency- and memory-efficient public key infrastructures, in contrast to NIST's goal to standardize only one algorithm. Third, we show that code-based, isogeny-based and lattice-based algorithms can be implemented on a low-power IoT edge device based on an off-the-shelf Cortex M4 microcontroller while maintaining viable battery runtimes. This is contrary to much research that claims dedicated hardware accelerators are mandatory.
The rapid expansion of the Internet of Things (IoT) has introduced millions of resource-constrained devices into critical infrastructures, consumer environments, and industrial systems. These devices rely on lightweight communication protocols such as MQTT to support low-power, intermittent, and bandwidth-limited operation. However, common TLS algorithms used to secure MQTT communications are vulnerable to quantum attacks made feasible by Shor's algorithm. As a result, IoT infrastructures must evaluate and adopt post-quantum cryptographic (PQC) methods capable of providing long-term resilience. This report investigates the implementation of PQC algorithms within an MQTT-based IoT networks using three Raspberry Pis. Specifically, it integrates the FALCON digital signature scheme, one of NIST's selected post-quantum signature algorithms, to maintain message authenticity and integrity across resource-constrained MQTT clients and brokers. By measuring system performance, the research characterizes the practical trade-offs of deploying lattice-based PQC on lightweight hardware.
The recent introduction of Google’s Willow quantum chip has demonstrated remarkable computational capabilities, solving problems in microseconds that would take classical computers millions of years. As quantum computers advance toward cryptographic relevance, existing encryption algorithms become vulnerable to attacks that could break them within seconds or minutes, rendering current cryptographic protections ineffective. This necessitates the establishment of post-quantum cryptography (PQC) standards to secure systems in the quantum era. This study evaluates the performance of NIST-standardized PQC algorithms ML-KEM (512, 768, 1024) and ML-DSA (2, 3, 5) on a Raspberry Pi 4 Model B, representing baseline IoT device capabilities. Using the Liboqs library, each algorithm was executed across 1000 iterations in a real-world wireless network environment connected to a router, accounting for practical network conditions such as packet loss, latency, and jitter to assess computational feasibility under resource-constrained conditions. Experimental results demonstrate the practical viability of PQC algorithms in IoT environments. ML-KEM-512 achieves encapsulation in 55.76 μs and decapsulation in 56.15 μs, with key generation in 123.78 μs (median), while ML-DSA-44 completes signature generation in 379.83 μs and verification in 159.38 μs. These findings confirm that both ML-KEM and ML-DSA algorithms offer efficient and rapid performance, making them suitable candidates for securing IoT devices against quantum threats.
Advances in quantum computers may pose a significant threat to existing public-key encryption methods, which are crucial to the current infrastructure of cyber security. Both RSA and ECDSA, the two most widely used security algorithms today, may be (in principle) solved by the Shor algorithm in polynomial time due to its ability to efficiently solve the discrete logarithm problem, potentially making present infrastructures insecure against a quantum attack. The National Institute of Standards and Technology (NIST) reacted with the post-quantum cryptography (PQC) standardization process to develop and optimize a series of post-quantum algorithms (PQAs) based on difficult mathematical problems that are not susceptible to being solved by Shor’s algorithm. Whilst high-powered computers can run these PQAs efficiently, further work is needed to investigate and benchmark the performance of these algorithms on lower-powered (constrained) devices and the ease with which they may be integrated into existing protocols such as TLS. This paper provides quantitative benchmark and handshake performance data for the most recently selected PQAs from NIST, tested on a Raspberry Pi 4 device to simulate today’s IoT (Internet of Things) devices, and provides quantitative comparisons with previous benchmarking data on a range of constrained systems. CRYSTALS-Kyber and CRYSTALS-Dilithium are shown to be the most efficient PQAs in the key encapsulation and signature algorithms, respectively, with Falcon providing the optimal TLS handshake size.