Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Computing, Communication, and Simulation

Devices for quantum communication over mode-division-multiplexing systems

Afshin Shamsshooli, Young B. Kwon, Cheng Guo, Michael Vasilyev

Published Mar 8, 2023• 3 citations
Publisher

Abstract

In the absence of quantum repeaters, the only way to increase the quantum communication capacity at a given reach is to employ more modes for encoding and transmitting information. While frequency, temporal, and polarization modes have already been exploited for this purpose, the use of many spatial modes over long distances has only recently become possible owing to the development of low-loss few-mode fibers (FMFs). We will discuss the development of two key enablers of quantum communication over FMF spatial modes: 1) spatiallyentangled photon-pair generator and 2) dynamically-reconfigurable spatial-mode de-multiplexer that can perform projective measurements alternating between two sets of mutually unbiased bases in a given spatial mode space. Both devices are based on the spatial-mode-selective quantum frequency conversion process, implemented in either χ(2) (multimode LiNbO3 waveguide) or χ(3) (custom-made FMF) nonlinear medium.

DOI
10.1117/12.2655576

Related papers

Generation and transformation of spatial mode entanglement by using a mode-maintaining few-mode fiber

Shengjie Zhu, Liang Cui, Jian Guo +3 more

The spatial degree of freedom (DOF) has significant applications in the emerging high-dimensional quantum information processing. Using a mode-maintaining few-mode fiber (FMF) and a dual-Sagnac-loop configuration, we generate polarization-entangled photon pairs and transform the entanglement into spatial DOF. We obtain Bell states encoded in the linearly polarized (LP) and orbital angular momentum (OAM) mode bases, respectively. The entangled photons from the FMF are in well-defined spatial modes, providing great advantages for the entanglement generation, manipulation, and transmission. The measured fidelities of the obtained entangled states are more than 97%. Our generation-and-transformation protocol can also be adopted on other integrated waveguide platforms to develop robust and miniaturized sources of spatial entanglement.

Optics Letters•Mar 9, 2026•1 citation

Few-Mode-Fiber Technology Fine-tunes Losses in Quantum Communication Systems

A. Alarcón, J. Argillander, G. Lima +1 more

A natural choice for quantum communication is to use the relative phase between two paths of a single photon for information encoding. This method was nevertheless quickly identified as impractical over long distances, and thus a modification based on single-photon time bins has become widely adopted. It, however, introduces a fundamental loss, which increases with the dimension and limits its application over long distances. Here solve this long-standing hurdle by using a few-mode-fiber space-division-multiplexing platform working with orbital-angular-momentum modes. In our scheme, we maintain the practicability provided by the time-bin scheme, while the quantum states are transmitted through a few-mode fiber in a configuration that does not introduce postselection losses. We experimentally demonstrate our proposal by successfully transmitting phase-encoded single-photon states for quantum cryptography over 500 m of few-mode fiber, showing the feasibility of our scheme.

arXiv:2103.05018•Physical Review Applied•Sep 9, 2021•22 citations

Spectrally Multimode Photon Pair Source

Xiong, YanJuan

The development of the quantum computer challenges the security of classical communication. This is due to the security of classical encryption being based on the computational complexity of an algorithm, for example, the difficulty of factoring a number into its prime product. Quantum communication uses quantum mechanics to manipulate quantum states and exchange information between two locations. Quantum communication has proven to be unconditionally secure. However, the fact that the maximum transmission distance is largely limited by attenuation in the distribution link remains one of the biggest challenges for practical quantum communication. Quantum repeaters can greatly extend this communication transmission distance. To realize quantum repeaters, one requires quantum memories, entanglement swapping operations, and photon pair-sources. In addition, quantum repeaters greatly benefit - in terms of the achievable entanglement distribution rate - if they can incorporate some form of multiplexing. Multiplexing is possible in any of the available photonic modes, which for transmission in single-mode fibers amounts to polarization, spectral, and temporal modes. The polarization degree of freedom is undesirable because it only has two orthogonal modes. The choice of the spectral or temporal modes for multiplexing then depends on what is most compatible with other components in the setup, particularly the quantum memory, which is the most demanding component. Based on prior demonstrations in the lab of spectral multiplexing in rare-earth ion doped crystals, the purpose of my project has been to build a spectrally multi-mode photon pair-source. Our implementation of the spectrally multi-mode photon pair sources relies on a nonlinear optics process that involves the interaction of strong light and a non-linear crystal. To achieve the spectral selection of specific modes, the non-linear crystal is combined with a suitable cavity.

•Sep 1, 2021•0 citations

Towards a Real-World Quantum Repeater

Marcel.li Grimau Puigibert

"Quantum communication is the art of transferring a quantum state from one place to another". The capability of distributing quantum states allows, for instance, provably secure communication and, in the near future, will enable the interconnection of quantum computers to establish a quantum internet. A convenient way to send quantum states from one place to another is to encode them into photons and distribute them using optical bres. The distance over which this can be achieved is still limited to a few hundred of kilometers. However, it can be extended in principle to arbitrary long distances by means of quantum repeaters. The realization of such quantum repeaters will require the engineering and interfacing of heterogeneous elements such as entangled photon-pair sources, quantum memories and entanglement swapping operations. The main goal of this thesis is to develop and study the compatibility of the main elements required to build a frequency multiplexed quantum repeater. This architecture requires a frequency multimode entangled photon pair source which, for example, could be implemented exploiting the process that involves the interaction of a strong light pulse with a non-linear crystal. Such a process is versatile and allows easy tailoring of the photon-pair spectral properties in order to match the requirements of the frequency multiplexed quantum repeater architecture. First, as a precursor of such a photon pair source, we developed a novel heralded single photon source that involves spectrally resolved single photon detection and on-demand frequency shifting. These capabilities are also essential tools in a frequency multiplexed quantum repeater. Next, we demonstrated the compatibility of such a sources with frequency multimode photonic quantum memories by performing spectrally multiplexed storage of single photons. We also tested the capability of high- delity storage of photons encoding quantum information in their polarization degree of freedom. Finally, we showed that entanglement swapping operations, i.e. Bell-state measurements, can be performed using photon pair sources compatible with quantum memories, quantum repeater architectures, and real-world scenarios. While a lot of e ort remains to be done, in the work presented in this thesis we demonstrated that all the key elements required to build a frequency multiplexed quantum repeater can be built and eventually be interfaced. The main obstacles towards that goal and possible ways to overcome them are also discussed.

•Dec 14, 2017•0 citations

Modal division multiplexing of quantum and classical signals in few-mode fibers

Danilo Zia, Mario Zitelli, Gonzalo Carvacho +3 more

Mode-division multiplexing using multimode optical fibers has been intensively studied in recent years, in order to alleviate the transmission capacity crunch. Moreover, the need for secure information transmission based on quantum encryption protocols leads to investigating the possibility of multiplexing both quantum and classical signals in the same fiber. In this work, we experimentally study the modal multiplexing of both quantum and classical signals at telecom wavelengths, by using a few-mode fiber of 8 km and modal multiplexers/demultiplexers. We observe the existence of random-mode coupling at the quantum level, leading to cross-talk among both degenerate and non-degenerate channels. Our results demonstrate the feasibility of using few-mode fibers for simultaneously transmitting classical and quantum information, leading to an efficient implementation of physical information encryption protocols in spatial-division multiplexed systems.

arXiv:2412.17578•Dec 23, 2024•2 citations

A Few-Mode-Fiber Platform for Quantum Communication Applications

Alvaro Alarcón

Society as we know it today would not have been possible without the explosive and astonishing development of telecommunications systems, and optical fibers have been one of the pillars of these technologies. Despite the enormous amount of data being transmitted over optical networks today, the trend is that the demand for higher bandwidths will also increase. Given this context, a central element in the design of telecommunications networks will be data security, since information can often be confidential or private. Quantum information emerges as a solution to encrypt data by quantum key distribution (QKD) between two users. This technique uses the properties of nature as the fundamentals of operation rather than relying on mathematical constructs to provide data protection. A popular alternative to performing QKD is to use the relative phase between two individual photon paths for information encoding. However, this method was not practical over long distances. The time-bin- based scheme was a solution to the previous problem given its practical nature, however, it introduces intrinsic losses due to its design, which increases with the dimension of the encoded quantum system. In this thesis we have designed and tested a fiber-optic platform using spatial-division- multiplexing techniques. The use of few-mode fibers and photonic lanterns are the cornerstone of our proposal, which also allow us to support orbital angular momentum (OAM) modes. The platform builds on the core ideas of the phase-coded quantum communication system and also takes advantage of the benefits proposed by the time-bin scheme. We have experimentally tested our proposal by successfully transmitting phase-coded single-photon states over 500 m few-mode fiber, demonstrating the feasibility of our scheme. We demonstrated the successful creation of OAM states, their propagation and their successful detection in an all in-fiber scheme. Our platform eliminates the post-selection losses of time-bin quantum communication systems and ensures compatibility with next-generation optical networks and opens up new possibilities for quantum communication.

Linköping studies in science and technology. Thesis•Apr 25, 2022•0 citations
In the absence of quantum repeaters, the only way to increase the quantum communication capacity at a given reach is to employ more modes for encoding and transmitting information. While frequency, temporal, and polarization modes have already been exploited for this purpose, the use of many spatial modes over long distances has only recently become possible owing to the development of low-loss few-mode fibers (FMFs). We will discuss the development of two key enablers of quantum communication over FMF spatial modes: 1) spatiallyentangled photon-pair generator and 2) dynamically-reconfigurable spatial-mode de-multiplexer that can perform projective measurements alternating between two sets of mutually unbiased bases in a given spatial mode space. Both devices are based on the spatial-mode-selective quantum frequency conversion process, implemented in either χ(2) (multimode LiNbO3 waveguide) or χ(3) (custom-made FMF) nonlinear medium.
The spatial degree of freedom (DOF) has significant applications in the emerging high-dimensional quantum information processing. Using a mode-maintaining few-mode fiber (FMF) and a dual-Sagnac-loop configuration, we generate polarization-entangled photon pairs and transform the entanglement into spatial DOF. We obtain Bell states encoded in the linearly polarized (LP) and orbital angular momentum (OAM) mode bases, respectively. The entangled photons from the FMF are in well-defined spatial modes, providing great advantages for the entanglement generation, manipulation, and transmission. The measured fidelities of the obtained entangled states are more than 97%. Our generation-and-transformation protocol can also be adopted on other integrated waveguide platforms to develop robust and miniaturized sources of spatial entanglement.
A natural choice for quantum communication is to use the relative phase between two paths of a single photon for information encoding. This method was nevertheless quickly identified as impractical over long distances, and thus a modification based on single-photon time bins has become widely adopted. It, however, introduces a fundamental loss, which increases with the dimension and limits its application over long distances. Here solve this long-standing hurdle by using a few-mode-fiber space-division-multiplexing platform working with orbital-angular-momentum modes. In our scheme, we maintain the practicability provided by the time-bin scheme, while the quantum states are transmitted through a few-mode fiber in a configuration that does not introduce postselection losses. We experimentally demonstrate our proposal by successfully transmitting phase-encoded single-photon states for quantum cryptography over 500 m of few-mode fiber, showing the feasibility of our scheme.
The development of the quantum computer challenges the security of classical communication. This is due to the security of classical encryption being based on the computational complexity of an algorithm, for example, the difficulty of factoring a number into its prime product. Quantum communication uses quantum mechanics to manipulate quantum states and exchange information between two locations. Quantum communication has proven to be unconditionally secure. However, the fact that the maximum transmission distance is largely limited by attenuation in the distribution link remains one of the biggest challenges for practical quantum communication. Quantum repeaters can greatly extend this communication transmission distance. To realize quantum repeaters, one requires quantum memories, entanglement swapping operations, and photon pair-sources. In addition, quantum repeaters greatly benefit - in terms of the achievable entanglement distribution rate - if they can incorporate some form of multiplexing. Multiplexing is possible in any of the available photonic modes, which for transmission in single-mode fibers amounts to polarization, spectral, and temporal modes. The polarization degree of freedom is undesirable because it only has two orthogonal modes. The choice of the spectral or temporal modes for multiplexing then depends on what is most compatible with other components in the setup, particularly the quantum memory, which is the most demanding component. Based on prior demonstrations in the lab of spectral multiplexing in rare-earth ion doped crystals, the purpose of my project has been to build a spectrally multi-mode photon pair-source. Our implementation of the spectrally multi-mode photon pair sources relies on a nonlinear optics process that involves the interaction of strong light and a non-linear crystal. To achieve the spectral selection of specific modes, the non-linear crystal is combined with a suitable cavity.
"Quantum communication is the art of transferring a quantum state from one place to another". The capability of distributing quantum states allows, for instance, provably secure communication and, in the near future, will enable the interconnection of quantum computers to establish a quantum internet. A convenient way to send quantum states from one place to another is to encode them into photons and distribute them using optical bres. The distance over which this can be achieved is still limited to a few hundred of kilometers. However, it can be extended in principle to arbitrary long distances by means of quantum repeaters. The realization of such quantum repeaters will require the engineering and interfacing of heterogeneous elements such as entangled photon-pair sources, quantum memories and entanglement swapping operations. The main goal of this thesis is to develop and study the compatibility of the main elements required to build a frequency multiplexed quantum repeater. This architecture requires a frequency multimode entangled photon pair source which, for example, could be implemented exploiting the process that involves the interaction of a strong light pulse with a non-linear crystal. Such a process is versatile and allows easy tailoring of the photon-pair spectral properties in order to match the requirements of the frequency multiplexed quantum repeater architecture. First, as a precursor of such a photon pair source, we developed a novel heralded single photon source that involves spectrally resolved single photon detection and on-demand frequency shifting. These capabilities are also essential tools in a frequency multiplexed quantum repeater. Next, we demonstrated the compatibility of such a sources with frequency multimode photonic quantum memories by performing spectrally multiplexed storage of single photons. We also tested the capability of high- delity storage of photons encoding quantum information in their polarization degree of freedom. Finally, we showed that entanglement swapping operations, i.e. Bell-state measurements, can be performed using photon pair sources compatible with quantum memories, quantum repeater architectures, and real-world scenarios. While a lot of e ort remains to be done, in the work presented in this thesis we demonstrated that all the key elements required to build a frequency multiplexed quantum repeater can be built and eventually be interfaced. The main obstacles towards that goal and possible ways to overcome them are also discussed.
Mode-division multiplexing using multimode optical fibers has been intensively studied in recent years, in order to alleviate the transmission capacity crunch. Moreover, the need for secure information transmission based on quantum encryption protocols leads to investigating the possibility of multiplexing both quantum and classical signals in the same fiber. In this work, we experimentally study the modal multiplexing of both quantum and classical signals at telecom wavelengths, by using a few-mode fiber of 8 km and modal multiplexers/demultiplexers. We observe the existence of random-mode coupling at the quantum level, leading to cross-talk among both degenerate and non-degenerate channels. Our results demonstrate the feasibility of using few-mode fibers for simultaneously transmitting classical and quantum information, leading to an efficient implementation of physical information encryption protocols in spatial-division multiplexed systems.
Society as we know it today would not have been possible without the explosive and astonishing development of telecommunications systems, and optical fibers have been one of the pillars of these technologies. Despite the enormous amount of data being transmitted over optical networks today, the trend is that the demand for higher bandwidths will also increase. Given this context, a central element in the design of telecommunications networks will be data security, since information can often be confidential or private. Quantum information emerges as a solution to encrypt data by quantum key distribution (QKD) between two users. This technique uses the properties of nature as the fundamentals of operation rather than relying on mathematical constructs to provide data protection. A popular alternative to performing QKD is to use the relative phase between two individual photon paths for information encoding. However, this method was not practical over long distances. The time-bin- based scheme was a solution to the previous problem given its practical nature, however, it introduces intrinsic losses due to its design, which increases with the dimension of the encoded quantum system. In this thesis we have designed and tested a fiber-optic platform using spatial-division- multiplexing techniques. The use of few-mode fibers and photonic lanterns are the cornerstone of our proposal, which also allow us to support orbital angular momentum (OAM) modes. The platform builds on the core ideas of the phase-coded quantum communication system and also takes advantage of the benefits proposed by the time-bin scheme. We have experimentally tested our proposal by successfully transmitting phase-coded single-photon states over 500 m few-mode fiber, demonstrating the feasibility of our scheme. We demonstrated the successful creation of OAM states, their propagation and their successful detection in an all in-fiber scheme. Our platform eliminates the post-selection losses of time-bin quantum communication systems and ensures compatibility with next-generation optical networks and opens up new possibilities for quantum communication.