It is now well appreciated that quantum physics can be used to build better sensors. Such sensors can be based on unitary systems like various types of interferometers or open systems based on scattering and lossy transmission channels. I would highlight not only the importance of the quantum states used as probes, but also the importance of the quantum-ness of the measurement schemes. I would bring out the especial importance of the squeezed states of matter and light for sensing studies. I would illustrate the results with experiments.
It is now well appreciated that quantum physics can be used to build better sensors. Such sensors can be based on unitary systems like various types of interferometers or open systems based on scattering and lossy transmission channels. I would highlight not only the importance of the quantum states used as probes, but also the importance of the quantum-ness of the measurement schemes. I would bring out the especial importance of the squeezed states of matter and light for sensing studies. I would illustrate the results with experiments.
It is now well appreciated that quantum physics can be used to build better sensors. Such sensors can be based on unitary systems [1,2] like interferometers or open systems based on scattering and lossy transmission channels [3-5]. The framework of the quantum Fisher information enables one to obtain best estimates of the parameters and then one can design possible experiments that can reach Cramer- Rao bounds. I would bring out not only the importance of the quantum states used as probes, but also the importance of the ‘quantum’ measurement schemes especially the ones that depend on time reversed arrangements. I would illustrate the great usefulness of squeezed states of matter and light for metrology. [1] S. C. Burd et al., Quantum amplification of mechanical oscillator motion, Science 364, 1163 (2019). [2] G. S. Agarwal, and L. Davidovich, Quantifying quantum-amplified metrology via Fisher information, Phys. Rev. Res. 4, L 012014 (2022). [3] J. Wang, L. Davidovich, and G. S. Agarwal, Quantum sensing of open systems: Estimation of damping constants and temperature, Phys. Rev. Res. 2, 033389 (2020). [4] F. Li, T. Li, M. O. Scully, and G. S. Agarwal, Quantum advantage with seeded squeezed light for absorption measurement, Phys. Rev. Applied 15, 044030 (2021). [5] T.Li, F. Li, X. Liu, V. Yakovlev and G. S. Agarwal, Quantum-enhanced stimulated Brillouin scattering spectroscopy and imaging, OPTICA 9, 959 (2022).
The aim of quantum sensing is to develop quantum methods to extract the maximum amount of information from a system with minimal disturbance upon it. Indeed, the possibility of performing precision measurements by adopting quantum resources can increase the achievable precision going beyond the semiclassical regime of operation. However the quantum states suitable for quantum metrology protocols, result extremely fragile under losses and decoherence, unavoidable in experimental implementations, destroying completely quantum benefits. This scenario puts the beating of realistic, noisy environments as the main challenge in developing quantum sensing.
An important part of optical sensing is interferometry, where direct or homodyne detection at the output of an interferometer yields information about small phase shifts. Classical interferometry operates at the shot-noise limit (SNL), caused by the photon structure of light and reached when an interferometer is fed with coherent light. The use of nonclassical light at the input of an interferometer enables overcoming the SNL. In particular, squeezed light is known to be less noisy than coherent light. An interferometer fed with strongly squeezed light can, in principle, provide the phase sensitivity at the Heisenberg limit, the ultimate limit allowed by the laws of physics. However, this supersensitive operation is strongly degraded by loss – both inside the interferometer and outside it, at the stage of detection. While the former (internal loss) seems to be inevitable, the latter (detection loss) can be overcome, and we demonstrate it in our recent experiment. The clue is to amplify light at the interferometer output using a phase-sensitive optical parametric amplifier. This device does not introduce additional noise, but it amplifies the fragile quantum signal and thus makes it tolerant to loss at the detection stage. In a proof-of-principle experiment, we build a polarization Mach-Zehnder interferometer and feed it with coherent light in one port and a squeezed vacuum in another port. At one output port, we amplify light with an optical parametric amplifier and measure a phase sensitivity of 13 mrad for 1500 photons in the interferometer. This result, achieved with 50% detection efficiency, overcomes the SNL by 3 dB. Moreover, by using stronger amplification, we can overcome the SNL under detection efficiency as low as 13%. Our results outline a way to use squeezed light for real-life sensing, where the detection efficiency cannot be very high, especially in spectral ranges like middle-infrared or terahertz.
Quantum optical sensors are ubiquitous in various fields of research, from biological or medical sensors to large-scale experiments searching for dark matter or gravitational waves. Gravitational-wave detectors have been very successful in implementing cavities and quantum squeezed light for enhancing sensitivity to signals from black hole or neutron star mergers. However, the sensitivity to weak forces is limited by the available energy and the optical decoherence in the system. Here, we derive the fundamental sensitivity limit of cavity- and squeezed-light-enhanced interferometers with optical loss. This limit is attained by the optimal use of an additional internal squeeze operation, which allows the mitigation of readout loss. We demonstrate the application of internal squeezing to various scenarios and confirm that it indeed allows one to reach the best sensitivity in cavity- and squeezed-light-enhanced linear force sensors. Our work establishes the groundwork for the future development of optimal sensors in real-world scenarios where, up until now, the application of squeezed light was curtailed by various sources of decoherence.
High precision interferometers are the building blocks of precision metrology and the ultimate interferometric sensitivity is limited by the quantum noise. Here, we propose and experimentally demonstrate a compact quantum interferometer involving two optical parametric amplifiers and the squeezed states generated within the interferometer are directly used for the phase-sensing quantum state. By both squeezing shot noise and amplifying phase-sensing intensity the sensitivity improvement of 4.86±0.24 dB beyond the standard quantum limit is deterministically realized and a minimum detectable phase smaller than that of all present interferometers under the same phase-sensing intensity is achieved. This interferometric system has significantly potential applications in a variety of measurements for tiny variances of physical quantities.